fxload-2008_10_13-7.mga9 RPM for aarch64

From Mageia 9 for aarch64 / media / core / release

This package contains utilities for downloading firmware to EZ-USB devices.
EZ-USB devices use 8051-based microcontrollers that have been enhanced with
registers, buffers, and other device-side support for USB transactions.

It currently supports devices based on the Anchorchips EZ-USB, as well as the
Cypress EZ-USB FX (which is almost completely source compatible) and EZ-USB FX2
(which is not).  All of these support full speed (12 Mbit/sec) transfers.  The
FX2 also supports high speed (480 Mbit/s) transfers, introduced in USB 2.0.

This version of FXLOAD supports optional use of two-stage loading, where
special device firmware is used to support writing into off-chip memory such
as RAM (when firmware neeeds more than about 8 KBytes of code and data) or,
for firmware development, I2C serial EEPROM.

Provides

• fxload
• fxload(aarch-64)

Requires

• ld-linux-aarch64.so.1()(64bit)
• ld-linux-aarch64.so.1(GLIBC_2.17)(64bit)
• libc.so.6()(64bit)
• libc.so.6(GLIBC_2.17)(64bit)
• libc.so.6(GLIBC_2.34)(64bit)
• rpmlib(CompressedFileNames) <= 3.0.4-1
• rpmlib(FileDigests) <= 4.6.0-1
• rpmlib(PayloadFilesHavePrefix) <= 4.0-1
• rpmlib(PayloadIsZstd) <= 5.4.18-1

License

GPLv2

Changelog

* Tue Mar 15 2022 umeabot <umeabot> 2008_10_13-7.mga9
  + Revision: 1791914
  - Mageia 9 Mass Rebuild
  + danf <danf>
  - Switch URLs from http: to https:

Files

/sbin/fxload
/usr/lib/.build-id
/usr/lib/.build-id/5d
/usr/lib/.build-id/5d/41d05c2b7236cafd61323d84ab979f15379961
/usr/share/doc/fxload
/usr/share/doc/fxload/COPYING
/usr/share/doc/fxload/README.txt
/usr/share/man/man8/fxload.8.xz
/usr/share/usb
/usr/share/usb/a3load.hex

Generated by rpm2html 1.8.1

Fabrice Bellet, Sat Nov 16 11:12:55 2024