| Index | index by Group | index by Distribution | index by Vendor | index by creation date | index by Name | Mirrors | Help | Search |
| Name: ser2net | Distribution: SUSE Linux Enterprise 15 SP5 |
| Version: 4.3.11 | Vendor: openSUSE |
| Release: bp155.1.6 | Build date: Mon May 22 14:43:09 2023 |
| Group: Productivity/Networking/Other | Build host: obs-arm-10 |
| Size: 270074 | Source RPM: ser2net-4.3.11-bp155.1.6.src.rpm |
| Packager: https://bugs.opensuse.org | |
| Url: https://github.com/cminyard/ser2net.git | |
| Summary: Serial port to network proxy | |
ser2net provides a way for a user to connect from a network connection to a serial port. It provides all the serial port setup, a configuration file to configure the ports, a control login for modifying port parameters, monitoring ports, and controlling ports.
GPL-2.0-or-later
* Thu Dec 29 2022 Dominique Leuenberger <dimstar@opensuse.org>
- Update to version 4.3.11:
+ Shut off write ready on a network write error.
+ Shut down device write on a device error.
- Changes from version 4.3.10:
+ Retry port startup on gensio allocation failure.
- Changes from version 4.3.9:
+ Add link to libgensioosh.
- Changes from version 4.3.8:
+ Update ser2net.yaml.5.
+ Add libgensiomdns if the mdns code is not in libgensio.
- Changes from version 4.3.7:
+ Fix issues disabling PAM support.
- Changes from version 4.3.6:
+ Add PAM authentication support.
* Sun Jan 23 2022 Martin Hauke <mardnh@gmx.de>
- ser2net 4.3.5:
* Yet another quick release. gcc-11 and the new sctp library
threw some curve balls, so those needed to be handled.
No functional changes, just compile and bug fixes related to
the new compiler and library.
* Sat Dec 11 2021 Andreas Stieger <andreas.stieger@gmx.de>
- ser2net 4.3.4:
* fix a few minor annoyances
- switch up upstream bootstrapped tarball
* Tue Nov 16 2021 Johannes Segitz <jsegitz@suse.com>
- Added hardening to systemd service(s) (bsc#1181400). Modified:
* ser2net.service
* Sat Feb 06 2021 Martin Hauke <mardnh@gmx.de>
- Update to version 4.3.3
* Some minor bug fixes, including a long standing issue with UDP
that I finally tracked down. Nothing major, but upgrading is
recommended.
- Update to version 4.3.1
* Lots of little cleanups and bug fixes.
* Thu Oct 29 2020 Martin Hauke <mardnh@gmx.de>
- Update to version 4.3.0
* Add mDNS support in ser2net for advertising.
* Some minor bug fixes.
* Tue Oct 06 2020 Martin Hauke <mardnh@gmx.de>
- Update to version 4.2.3
* bugfix release only
* No user visible changes
* Mon Aug 24 2020 Martin Hauke <mardnh@gmx.de>
- Update to version 4.2.2
* Add user lists, so you can specify which users are allowed to
use which connections.
* Split up dataxfer.c into smaller files, since it was far too
large.
* Converted to SPDX license identifiers in the files.
* tcpd on the controller interface had the wrong name, make it
the same as the 3.5 release.
* Sun Aug 09 2020 Martin Hauke <mardnh@gmx.de>
- Update to version 4.2.1
controller:
* Added a yaml mode for the controller interface. This should
make having a program talk to the controller much easier.
* In yaml mode for the controller interface, add asychronous
notifications to know if anything connects or disconnects.
* Wed Jul 08 2020 Martin Hauke <mardnh@gmx.de>
- Update to version 4.2.0
telnet:
* There was an issue with telnet handling where it could get
into a loop talking to the remote end.
* Fix an issue where an error in a certain place could cause
closing to hang.
selector:
Allow an arbitrary number of file descriptors with epoll. With
epoll, you can set the max number of fds > FD_SETSIZE. Allow
that.
IPv6:
* There was a bug in the Linux SCTP stack dealing with IPv6
handling that I thought was a bug in ser2net. So I looked, and
I found some issues with IPv6 in general and the way it handles
IPv4 address mapping. In the new code:
Modify the operation of an address without "ipv6," explicitly
in front of it to all V4 mapped addresses. And fix the connect
side to set V6 only on the socket if "ipv6,"is in front of it.
This means you cannot mix "ipv6," and "ipv6n4," addresses on
the same connection, and the default is now "ipv6n4"
This broke handling of things like "tcp,1234", so rework those
to only use IPv6 when it is mapped. That, in turn, broke UDP.
Or, more accurately, expose a UDP bug, so some work had to be
done to handle IPv4 mapped addresses in IPv6 by reworking
address comparison to handle that.
general:
convert gensio_raddr_to_str(), gensio_get_raddr(), and
gensio_remote_id() to use gensio_control(). Having separate
functions for those added to the API and added a lot of code
to all the intermediate layer. The function are there but
deprecated, and use the ioctls underneath them.
Have gensio snprint functions return a gensiods
Add dll visibililty handling. This is required for windows,
and makes things cleaner. As part of this, functions should
all be the right visibility now.
Lots of other little bug fixes and such.
relpkt:
There were issues with the way the base code handled certain
things. For a real protocol that might have outstanding data
to send but cannot send due to flow control, new functions
needs to be added to the base layer to account for this, and
relpkt needed to use them.
Fixed several other issues dealing with close handling and flow
control. It runs much better now.
msgdelim:
There was an issue with telnet handling where it could get into
a loop talking to the remote end.
Fix an issue where an error in a certain place could cause
closing to hang.
file descriptor based gensios:
Fixed an issue that would result in a callback being done after
close is compelete.
UDP:
As part of an added test, I found a situation where if the
upper layer doesn't accept the data for a UDP packet, the UDP
layer would not accept any more data from the socket.
* Sat May 16 2020 Martin Hauke <mardnh@gmx.de>
- Update to version 4.1.8
* ser2net will now retry accepters and connect back connectors
if they fail to come up or get an error.
* Wed Apr 29 2020 Martin Hauke <mardnh@gmx.de>
- Update to version 4.1.7
* Fix trace files so the actually work.
* Add a sendon option to cause data to be forwarded immediately
if the given sequence is seen.
* Convert the tests to use yaml configuration.
* Allow stdin to be read as a yaml config file.
* Allow yaml config to be passed in on the command line directly.
* Fix some issues with connect back handling.
* A host of other smaller things.
* Tue Apr 21 2020 Martin Hauke <mardnh@gmx.de>
- Install the configuration file into the correct directory
- > %{_sysconfdir}/ser2net/
* Sun Apr 19 2020 Martin Hauke <mardnh@gmx.de>
- Update to version 4.1.6
* upstream does not provide a changelog
- Drop patch:
* ser2net-config.patch (config is now done via YAML)
- Add BR: pkgconfig(libgensio), pkgconfig(yaml-0.1)
* Thu Sep 06 2018 Jan Engelhardt <jengelh@inai.de>
- Replace %__-type macro indirections.
* Fri Aug 17 2018 agraf@suse.com
- Update to version 3.5
- allows to declare device aliases which enabled by-path device names
- adapted ser2net-config.patch
- builds with autoconf, add build dependencies (autoconf, automake, libtool)
* Mon Mar 23 2015 p.drouand@gmail.com
- Update to version 2.10.0
* utils.c, controller.c, dataxfer.c: Return an errno from
scan_tcp_port() so it can return an out of memory error.
* controller.c, controller.h, ser2net.c: Add an out of memory
return code from controller_init().
* utils.c, utils.h, dataxfer.c, controller.c: Rework the handling
of addresses to work properly with all the return values of
getaddrinfo, and to prefer IPV6 over IPV4 when opening the socket.
This means if you specify a number, it will open the IPV6 ::,port
address first. This was a big cleanup, and moved a lot of the
base socket handling into utils.h.
* dataxfer.c: Rework the stdio handling so it doesn't rely on the
port number in the address, since that is now gone.
* dataxfer.c: Set port->closestr to NULL when freeing it to avoid
a double-free.
* readconfig.c, ser2net.8: Rework the input handling so an IPV6
can be specified as part of the portnum parameter. This was hard
because IPV6 addresses have ':' in them. Basically, if there is a
"," in the port specification, assume that everything from the
beginning of the line to the ':' after the ',' is the port number.
* utils.c, utils.h, dataxfer.c, controller.c: Modified address
handling so that ser2net opens all the addresses returned by
getaddrinfo, not just the first one. That should make things
work correctly in a lot more cases.
* io.h, devcfg.h, devcfg.c, dataxfer.c, buffer.c, buffer.h: Abstract
the device I/O operations.
* utils.c, utils.h, controller.h, controller.c: Fix some const
correctness issues
* conroller.c, controller.h: Add printf-style output.
* dataxfer.h, dataxfer.c, devcfg.h, devcfg.c, io.h, readconfig:
Rework the error and output handling to make it more flexible, so
errors can be output with useful information from the lower
* utils.h, readconfig.c, dataxfer.c: Rework the find_xxx
functions to return a strdup of the string.
* dataxfer.c, dataxfer.h, devcfg.h: Remove the dinfo structure
and move the contents into the port structure, and remove the
now empty devcfg.h.
* configure.ac: Minor rework.
* ser2net.h, Makefile.am: Move some things into a new
ser2net.h file.
* devcfg.c, controller.c, dataxfer.c, ser2net.c, utils.c: Add the
ser2net.h include file.
* dataxfer.c: Fix some EAGAIN handling.
- Require systemd-rpm-macros instead of pkgconfig(systemd)
- Remove redundant %clean section
- Update ser2net-config.patch
/etc/ser2net /etc/ser2net/ser2net.yaml /usr/lib/systemd/system/ser2net.service /usr/sbin/ser2net /usr/share/doc/packages/ser2net /usr/share/doc/packages/ser2net/AUTHORS /usr/share/doc/packages/ser2net/ChangeLog /usr/share/doc/packages/ser2net/README /usr/share/licenses/ser2net /usr/share/licenses/ser2net/COPYING /usr/share/man/man5/ser2net.yaml.5.gz /usr/share/man/man8/ser2net.8.gz
Generated by rpm2html 1.8.1
Fabrice Bellet, Tue Jul 9 18:17:49 2024