ghc-path-0.9.2-bp155.2.15 RPM for s390x

From OpenSuSE Leap 15.5 for s390x

Support for well-typed paths.

Provides

• ghc-path
• ghc-path(s390-64)
• libHSpath-0.9.2-FS4pcKXLoKM108QC3GuXNY-ghc8.10.7.so()(64bit)

Requires

• libHSOneTuple-0.3.1-3GxxbhOSBHi4ceOVAky4Ok-ghc8.10.7.so()(64bit)
• libHSaeson-1.5.6.0-GucjSlnkAmbGtI7a0X9f8a-ghc8.10.7.so()(64bit)
• libHSarray-0.5.4.0-ghc8.10.7.so()(64bit)
• libHSassoc-1.0.2-DsdSF5DMY58DibWZa9EkB7-ghc8.10.7.so()(64bit)
• libHSattoparsec-0.14.4-BPjsBpkimHu7JIDNbeuyLW-attoparsec-internal-ghc8.10.7.so()(64bit)
• libHSattoparsec-0.14.4-EEMXy373XTlBX7g3IoZzXH-ghc8.10.7.so()(64bit)
• libHSbase-4.14.3.0-ghc8.10.7.so()(64bit)
• libHSbase-compat-0.12.1-EotHHFfFQAJ7ymd9XZQwmL-ghc8.10.7.so()(64bit)
• libHSbase-compat-batteries-0.12.1-EWnQCq2AmtBwPn6elJcU5-ghc8.10.7.so()(64bit)
• libHSbase-orphans-0.8.6-8jdORGUoOgxDxHbvgXV8Fx-ghc8.10.7.so()(64bit)
• libHSbifunctors-5.5.12-8aJID6K1Fjw2VXThfYCP2i-ghc8.10.7.so()(64bit)
• libHSbinary-0.8.8.0-ghc8.10.7.so()(64bit)
• libHSbytestring-0.10.12.0-ghc8.10.7.so()(64bit)
• libHScomonad-5.0.8-2aVKBqSrRyFAf8iHeVzdod-ghc8.10.7.so()(64bit)
• libHScontainers-0.6.5.1-ghc8.10.7.so()(64bit)
• libHSdata-fix-0.3.2-BCdpLgW9cwHAnrezyxR8u-ghc8.10.7.so()(64bit)
• libHSdeepseq-1.4.4.0-ghc8.10.7.so()(64bit)
• libHSdistributive-0.6.2.1-2enHeVVZXhxHGdVD0mvkOz-ghc8.10.7.so()(64bit)
• libHSdlist-1.0-DfSJiQK14jl1NJ1DncWHr2-ghc8.10.7.so()(64bit)
• libHSexceptions-0.10.4-ghc8.10.7.so()(64bit)
• libHSfilepath-1.4.2.1-ghc8.10.7.so()(64bit)
• libHSghc-boot-th-8.10.7-ghc8.10.7.so()(64bit)
• libHSghc-prim-0.6.1-ghc8.10.7.so()(64bit)
• libHShashable-1.3.5.0-IGX0XxzDT1f2AkNytPe4lH-ghc8.10.7.so()(64bit)
• libHSindexed-traversable-0.1.2-Eo535BQju5EJMNNLLeinJ3-ghc8.10.7.so()(64bit)
• libHSinteger-gmp-1.0.3.0-ghc8.10.7.so()(64bit)
• libHSinteger-logarithms-1.0.3.1-xsL5hmMYGlG65gkrXlNN-ghc8.10.7.so()(64bit)
• libHSmtl-2.2.2-ghc8.10.7.so()(64bit)
• libHSpretty-1.1.3.6-ghc8.10.7.so()(64bit)
• libHSprimitive-0.7.3.0-HMedJdQUTCQ79SiIUfisnA-ghc8.10.7.so()(64bit)
• libHSrandom-1.2.1.1-7JCauc0AKIuFDMYJWSrKkh-ghc8.10.7.so()(64bit)
• libHSscientific-0.3.7.0-CfGYDmam8OFCyRakWk0zP3-ghc8.10.7.so()(64bit)
• libHSsplitmix-0.1.0.4-2Vk17ilFpJOHvYIcBN29Ar-ghc8.10.7.so()(64bit)
• libHSstm-2.5.0.1-ghc8.10.7.so()(64bit)
• libHSstrict-0.4.0.1-1cwSE68Kbsh7jZhKTLvloy-ghc8.10.7.so()(64bit)
• libHStagged-0.8.6.1-EiQY3za6Q5HE9cdvqupke2-ghc8.10.7.so()(64bit)
• libHStemplate-haskell-2.16.0.0-ghc8.10.7.so()(64bit)
• libHStext-1.2.4.1-ghc8.10.7.so()(64bit)
• libHSth-abstraction-0.4.3.0-FMje8SMcvo6Ej3bhfOvFnc-ghc8.10.7.so()(64bit)
• libHSthese-1.1.1.1-6YDWN3cpL4X56NpnorGZbs-ghc8.10.7.so()(64bit)
• libHStime-1.9.3-ghc8.10.7.so()(64bit)
• libHStime-compat-1.9.6.1-EnkEyN7KLkoLgUUHGvvgIg-ghc8.10.7.so()(64bit)
• libHStransformers-0.5.6.2-ghc8.10.7.so()(64bit)
• libHStransformers-compat-0.7.2-1KC3IXOcuxMEnmo4oqBwTm-ghc8.10.7.so()(64bit)
• libHSunix-2.7.2.2-ghc8.10.7.so()(64bit)
• libHSunordered-containers-0.2.19.1-JOm9W4pbFskHFpQOL7DdGr-ghc8.10.7.so()(64bit)
• libHSuuid-types-1.0.5-FKXkOPT6U72CVHzAb8GLN8-ghc8.10.7.so()(64bit)
• libHSvector-0.12.3.1-4ZUkvMG0hba9AHoOHt8bPP-ghc8.10.7.so()(64bit)
• libc.so.6()(64bit)
• libc.so.6(GLIBC_2.2)(64bit)
• libdl.so.2()(64bit)
• libgmp.so.10()(64bit)
• libm.so.6()(64bit)
• libpthread.so.0()(64bit)
• librt.so.1()(64bit)
• libutil.so.1()(64bit)
• rpmlib(CompressedFileNames) <= 3.0.4-1
• rpmlib(FileDigests) <= 4.6.0-1
• rpmlib(PayloadFilesHavePrefix) <= 4.0-1
• rpmlib(PayloadIsXz) <= 5.2-1

License

BSD-3-Clause

Changelog

* Mon Dec 27 2021 Peter Simons <psimons@suse.com>
  - Update path to version 0.9.2.
    0.9.2
    * Data instances for Rel, Abs, File, and Dir.
    * Bump hashable upper bound to <1.5.
    0.9.1
    * Support for genvalidity >=1.0.0.0
    * `mapSomeBase` and `prjSomeBase` for modifying or projecting SomeBase.
* Sat Jun 19 2021 psimons@suse.com
  - Update path to version 0.9.0.
    0.9.0
    * Fix inconsistencies on different platforms: [#166](https://github.com/commercialhaskell/path/issues/166)
    * `replaceProperPrefix`
    * Make it possible to use windows paths on posix and vice versa
* Fri Mar 12 2021 psimons@suse.com
  - Update path to version 0.8.0 revision 1.
    Upstream has revised the Cabal build instructions on Hackage.
* Thu Dec 17 2020 Ondřej Súkup <mimi.vx@gmail.com>
  - disable %{ix86} build
* Fri Aug 21 2020 psimons@suse.com
  - Update path to version 0.8.0.
    0.8.0
    * Rerelease of 0.7.1 with better version number
    0.7.1:
    * Test with GHC 8.8.2, 8.8.3, 8.10.1.
    * Export SomeBase constructor.
    * Fix Lift severe Lift instance bug
* Mon Dec 30 2019 psimons@suse.com
  - Update path to version 0.7.0.
    0.7.0:
    * BREAKING CHANGE: "fileExtension" now throws an exception if the file has no
    extension. You can use the result as a "Maybe" in pure
    code or handle the exception appropriately in any other monad.
    * Old extension operations "addFileExtension" and "setFileExtension" have
    been deprecated and replaced by "addExtension" and "replaceExtension"
    respectively with new behavior.
    ADAPTING YOUR CODE TO THIS CHANGE:
    * Code that sets an extension not starting with a "." e.g.  "foo", must
    be changed such that it starts with a "." i.e. ".foo".
    * Code that sets multiple extensions in one go e.g. ".tar.gz" must be
    changed to set them one at a time instead i.e. add ".tar" first and
    then add ".gz".
    * Code that sets an extension starting with multiple dots e.g.
    "..foo" must be changed such as to make the extra dots part of the
    file name instead.
    Details:
    The new operations "addExtension" and "replaceExtension" accept only "valid"
    extension forms which is exactly the same as what "fileExtension" returns.
    A valid extension starts with a @.@ followed by one or more characters
    not including @.@ followed by zero or more @.@s in trailing position.
    This change allows extension operations to be principled following
    these laws:
    * flip addExtension file >=> fileExtension == return
    * (fileExtension >=> flip replaceExtension file) file == return file
    * Add splitExtension operation such that:
    * uncurry addExtension . swap >=> splitExtension == return
    * splitExtension >=> uncurry addExtension . swap == return
    * fileExtension == (fmap snd) . splitExtension@
    * Add 'Path.Posix' and 'Path.Windows' modules for manipulating
    Windows or Posix style paths independently of the current platform.
    * Add 'Lift' instance for 'Path'.
    * `Path.Windows` normalizes path separators throughout path,
    including immediately following drive letter.
    * `Path.Windows` handles UNC (`\\host\share\`) and Unicode (`\\?\C:\`) path
    without breaking the double-separator prefix.
    * Remove support for old GHC version. The oldest supported version
    is 8.2.
* Fri Nov 08 2019 Peter Simons <psimons@suse.com>
  - Drop obsolete group attributes.
* Sat Oct 20 2018 Peter Simons <psimons@suse.com>
  - Use https URL to refer to bugs.opensuse.org.
* Wed Jul 18 2018 psimons@suse.com
  - Cosmetic: replace tabs with blanks, strip trailing white space,
    and update copyright headers with spec-cleaner.
* Mon May 14 2018 psimons@suse.com
  - Update path to version 0.6.1 revision 1.
    * Add 'addFileExtension' function and its operator form: (<.>).
    * Derive 'Eq' instance for 'PathException'.
    * Deprecate PathParseException and rename it to PathException
    * Allow 'parent' to work on relative paths as well
    * Deprecate isParentOf and stripDir and rename them to isProperPrefixOf and
      stripProperPrefix respectively.
    * Allow "." as a valid relative dir path with the following rules:
    * "./" </> "./" = "./"
    * "./" </> "x/" = "x/"
    * "x/" </> "./" = "x/"
    * dirname "x" = "./"
    * dirname "/" = "./"
    * dirname "./" = "./"
    * Make dirname return "." instead of "/" (fixes #18).
    * Remove the 'validity' flag.
    * Add synonym for setFileExtension in the form of an operator: (-<.>).
* Thu Aug 03 2017 psimons@suse.com
  - Updated with latest spec-cleaner version 0.9.8-8-geadfbbf.
* Mon Mar 27 2017 psimons@suse.com
  - Update to version 0.5.13 with cabal2obs.
* Wed Mar 22 2017 psimons@suse.com
  - Update to version 0.5.12 revision 2 with cabal2obs.
* Thu Mar 02 2017 psimons@suse.com
  - Update to version 0.5.12 revision 1 with cabal2obs.
* Sun Feb 05 2017 psimons@suse.com
  - Update to version 0.5.12 with cabal2obs.
* Fri Dec 16 2016 psimons@suse.com
  - Update to version 0.5.11 revision 1 with cabal2obs.
* Mon Aug 01 2016 psimons@suse.com
  - Update to version 0.5.9 revision 0 with cabal2obs.
* Sun Jul 10 2016 psimons@suse.com
  - Update to version 0.5.8 revision 0 with cabal2obs.
* Fri Jun 17 2016 mimi.vx@gmail.com
  - update to 0.5.8
    * Add Aeson instances.
* Tue Mar 08 2016 mimi.vx@gmail.com
  - update to 0.5.7
    * Fix haddock problem.
    * Reject only .. and .
    * Use filepath's isValid function for additional sanity checks
    * Disable parsing of path consisting only of "."
    * Add NFData instance for Path
    * Some typo/docs improvements
    * Add standard headers to modules
* Sun Nov 29 2015 mimi.vx@gmail.com
  - update to 0.5.3
    * Added conversion functions.
* Thu Nov 19 2015 mimi.vx@gmail.com
  - initial commit

Files

/usr/lib64/ghc-8.10.7/path-0.9.2
/usr/lib64/ghc-8.10.7/path-0.9.2/libHSpath-0.9.2-FS4pcKXLoKM108QC3GuXNY-ghc8.10.7.so
/usr/share/licenses/ghc-path
/usr/share/licenses/ghc-path/LICENSE

Generated by rpm2html 1.8.1

Fabrice Bellet, Tue Jul 9 18:25:27 2024