| Index | index by Group | index by Distribution | index by Vendor | index by creation date | index by Name | Mirrors | Help | Search |
| Name: atop | Distribution: SUSE Linux Enterprise 15 SP6 |
| Version: 2.8.1 | Vendor: openSUSE |
| Release: bp156.2.8 | Build date: Tue May 14 05:13:10 2024 |
| Group: Unspecified | Build host: s390zl2a |
| Size: 861884 | Source RPM: atop-2.8.1-bp156.2.8.src.rpm |
| Packager: https://bugs.opensuse.org | |
| Url: https://www.atoptool.nl/ | |
| Summary: Monitor for System Resources and Process Activity | |
Atop is an ASCII full-screen performance monitor, similar to the top command. At regular intervals, it shows system-level activity related to the CPU, memory, swap, disks and network layers, and it shows for every active process the CPU utilization in system and user mode, the virtual and resident memory growth, priority, username, state, and exit code. The process level activity is also shown for processes which finished during the last interval, to get a complete overview about the consumers of things such as CPU time. Atop only shows the active system-resources and processes, and only shows the deviations since the previous interval.
GPL-2.0-only
* Sat Jan 07 2023 Michael Vetter <mvetter@suse.com>
- Update to 2.8.1:
* Correct NUMA conversion in logfiles from version 2.7 to 2.8
* Avoid buffer overflows during value formatting
* Solve compiler warnings about format-truncation
* Mon Jan 02 2023 Michael Vetter <mvetter@suse.com>
- Update to 2.8.0:
* Rename AUTHOR in spec file
* Adapt atopconvert for conversion to version 2.8
* Atopacct.service verifies if psacct/acct is active (#227)
To avoid that the atopacctd daemon and the (ps)acct service both
try to activate process accounting continuously, the atopacct.service
refuses to start when the (ps)acct service is already active.
* Fix LLC output for Json
* Solve format-overflow/maybe-uninitialized warnings
* Reshuffle counters to ease raw file conversion
* Recalculate average queue in parseable output
* Corrected the order of inflight/avque
* Add inflight and avque counters to parseable data
* Fix BDELAY in priphead call to make_proc_prints for schedprocs
* Correct the array index used for previous samples per-container CPU values
* Reinstate dropped printing of avio msec values between 99.95 and 9995
* photosyst: add ceph rbd disk display
* photosys.c: correct the numa number for NUM and NUC
* Timeout when setting semaphore in atop (#207)
* Current CPU set to -1 for terminated process (#201)
When a process has terminated (status 'E') the current CPU will be
set to -1 (means: unknown) in the parsable output with label PRC.
* Typo corrections and correction in man page
* Introduce JSON output by '-J xxx'
* Add missing counter iInCsumErrors to ICMP counters
* supplement inflight I/O requests
* Man page: clarify elapsed time in PRG parseable output
* Exponent calulation for high counter might exceed column width
When a column width was defined of e.g. 4 positions, the value
99999 was shown as 100e3 instead of 99e3 (upward rounding caused
an extra position).
* PID selection can not be undone for same interval When pressing
'I' to select particular PIDs and pressing 'I' again within the
same interval to deselect by pressing the Enter-key, the deselection
is ignored. Solved by reinitializing the input buffer.
* Split the MEM line into two lines and add pagetable size Since it was
hardly possible to view the values in the MEM line (too many), the memory
utilization has been spread over two lines. The amount of memory used
for page tables has been added.
* Memory usage for TCP/UDP sockets
* Add Documentation key to atop-rotate.service/.timer (#206)
* Correct typos in man pages (#205)
* Add cgroup support (#127) The current cgroup is registered
for systems that are based on cgroup v2. Apart from the group name also
relevant controller information is maintained, like the cpu.max and the
memory.max (for the group itself and the most restrictive value in the
parent groups).
* Fix compiling error with -DHTTPSTATS
* supplement tcpsock and udpsock memory consumption
* Store PID width in header of raw log Register the number of positions
for PID and TID numbers on the measured system in the raw log. In this
way, the viewing of the raw log on another system will use the proper
column width for PID/TID.
* showhdrline: fix OOB access when COLS is too small
* Fix disk busy in man page
* Add block I/O delay to processes/threads
* Move run_in_guest into various.c
* Minor changes to text, column priority and coloring
* Support pgin & pgout
* Correction on calibration (one too many)
* Detect vmmemctl at two locations
* Use dup2 instead of close+dup
* Fix compiling warning
* Calibrate the value of nthr for each process
* photosyst.c: fixed path for vmmemctl
* Fix typo in man page
* Added link
* Only print current CPU frequency when supported by CPU architecture
* Lower priority of column 'numnode' in MEM line
* Support per-second counter for LLC
* Reformat status line info in initial screen
* Add LLC in atop man page
* Support LLC collection
* Add OpenRC init scripts (atop, atopacct)
* Support LLC collection
- Refresh patches:
* harden_atop-rotate.service.patch
* harden_atopacct.service.patch
* Mon Feb 28 2022 Michael Vetter <mvetter@suse.com>
- Update to 2.7.1:
* Correct disk stats in atopsar (#182)
* Explicit type definition in atop.service (#180)
* Fri Jan 07 2022 Michael Vetter <mvetter@suse.com>
- Update to 2.7.0:
* Describe (un)restricted view in first screen
* Cosmetic change
* Determine (un)restricted view by verifying suid instead of euid.
* Do not ignore unknown network interface
* Parseable output: optionally exchange spaces in command
* No setuid by default
* Correct conversion to 2.7 raw files
* Corrected type
* Only show per-node NUMA stats when more than 1 node
* Prepare man pages for version 2.7
* Prepare atopconvert for version 2.7
* Detect logrotation for process accounting with psacct/acct
* Speed and duplex mode not correctly filled for interface
* Bug solution related to discards
* Support discard counter for disks and skip unused disks
* ifprop.c: fix ioctl parameter after handshaking with kernel
* Show gigabits/sec instead of megabits/sec for Infiniband #131
* CVE: use execvp with a specified path to avoid PATH hijacking
* Correct memory busy logic in atopsar
* Add parseable output for per-node NUMA counters
* Additions to NUMA counters Table overflow checks
* Gather and show per numa cpu related statistics
* Gather and show per numa memory related statistics
* Correction in handling of zswap and ksm counters
* Support containers created by podman
* Cleanup old messages
* Do not change owner to root in Makefile (#76)
* Support process accounting log /var/log/account/pacct (#138)
* Polish do_perfevents when atop built with NOPERFEVENT
* Do not use doconvert funtion to validate counter (#160)
* New counter for number of NUMA pages migrated
* Modify field order and priority of paging counters
* Small text modification for migrated counter
* Avoid non-initialized prestat by introducing extra pointer
* Function 'calcdiff' (deviate.c) used uninitialized prestat struct
* Reserver space for future counters.
* Clean up ignored files
* Variable number of positions for sortitem
* Adapt man page of atop for state selection (add state 'I').
* Allow thread state 'I' with state selection (key 'Q')
* Count idle threads as non-interruptible threads
* Uninitialized index might cause segmentation fault.
* Support NVMe multipath disk statistics
* Support page migration counter
* photosyst.c: fix build on musl
* Use of struct ethtool_link_settings should be conditional
* Cosmetic change (source code layout)
* Various bug fixes and in general add 'thread' to all messages
* Properly define if interface is virtual or physical
* Add license info to various include files (solves issue #144)
* HTTP statistics modified from -h flag to -o flag (#152)
* Possible buffer overflow with huge number of seconds Number
of seconds will be limited to 5 positions.
* Possible buffer overflow with average disk I/O
* Allow process selection based on specific process states.
* Correct definition of environment variable LOGOPTS
* Switch to using curses vw_printw as vwprintw is deprecated
* Support multiple counters 'allocstall_' in /proc/vmstat.
* Avoid integer overflow when calculating PSI percentages.
* Suppress irrelevant counters (solves issue #148)
* Add the number of OOM kills to the -s report
* Record the number of process stalls to run memory compaction
* Make clean removes atopsar now (issue 145)
* Add counter for the number of OOM kills to the PAG line
* Add counters for zswap and KSM.
* ifprop.c: fix build with kernel < 4.6
* Fix initifprop() when obtaining properties of all interfaces
* Fixed rounding problems in the average-per-second mode.
- Refresh atop-makefile.patch
- Refresh harden_atop.service.patch
- Call make install instead of make systemdinstall
Default is systemd now
* Wed Aug 11 2021 Johannes Segitz <jsegitz@suse.com>
- Added hardening to systemd service(s). Added patch(es):
* harden_atop-rotate.service.patch
* harden_atop.service.patch
* harden_atopacct.service.patch
* harden_atopgpu.service.patch
* Tue Apr 13 2021 Ferdinand Thiessen <rpm@fthiessen.de>
- Update to version 2.6.0
* Sort threads within process.
* Individual threads within a process (key 'y') are shown in the
order of their TID. With the additional key 'Y' threads within
a process are sorted based on the current sort criterium.
* Show the WCHAN per thread.
* With the key 'W' is active, the wait channel is determined per
thread and shown with the scheduling information (key 's').
* Show runqueue delay per thread/process.
* For every process (cumulated) and every thread the time spent
waiting on the runqueue is shown as value 'RDELAY'.
* Show other modified/new metrics:
+ PSI pressure during interval time is shown
+ Counter 'avio' (average I/O time) for fast disks in
microseconds or nanoseconds
+ Counter 'zfarc' showing the current size of the ARC (cache)
for ZFSonlinux
+ Counter 'swcac' showing the current size of the swap cache
+ Counter LOCKSZ showing the virtual locked memory size
* Avoid crash with very high load average values.
* Fix errors in reading InfiniBand states.
* Support of rawlog files spanning multiple days.
* The time specification to define the begin time (-b flag)
and end time (-e flag) of both atop and atopsar is
[YYYYMMDD]hhmm now
* This also applies to the branch key ('b') when using atop
interactively.
* Support reading rawlog from a pipe.
* Rawlog data can be read from a pipe by atop and atopsar with
the option '-r -'. In this way, concatenated rawlog data from
the command atopcat can be directly processed.
* New program atopcat, the program atopcat concatenates rawlog
files and writes this data to stdout. The output can be
redirected to a new rawlog file or to atop/atopsar directly
via a pipe (see option '-r -' of these commands).
In this way e.g. weekly or monthly reports or extractions
can be created.
* Fri Jul 31 2020 Matthias Eliasson <elimat@opensuse.org>
- Update to version 2.5.0
Modifications for atop:
* Avoid using perf counters in VM
New option 'perfevents' in the atoprc file to define if the Instructions
Per Cycle (IPC) should be retrieved via the 'perf' counters. Specify
value 'auto' (default), 'enable' or 'disable'. In case of 'auto', the
Instructions Per Cycle counter will not be retrieved on VMs due to the
overhead of reading this counter in a guest.
* Improve daily rotation of logfile for systemd-based systems.
Exchange the files /etc/cron.d/atop, /etc/logrotate.d/psaccs_atop,
/etc/logrotate.d/psaccu_atop, /usr/share/atop/atop.daily,
/var/log/atop/dummy_after and /var/log/atop/dummy_before by
atop-rotate.service and atop-rotate.timer.
* Bug fixes:
Correction of PSI value 'io full'.
Use smaps_rollup (if present) instead of smaps for better performance.
Use writev instead of 3 single writes to avoid logfile corruption.
Modified handling of error messages (remain visible after window is
closed).
Correct CID for containers created by Kubernetes.
Allow reading a logfile via a named pipe (non-seekable).
Modifications for atopconvert:
* Show version of input file (even if only one parameter specified).
General:
* The format of the raw file is compatible with version 2.4.
- Run spec-cleaner
- Remove requires for cron and logrotate now that there is systemd service
and timers handling logrotation
- Remove Requires(post) for permissions since atop does not use cron files anymore
- Refresh patch:
* atop-makefile.patch
- Add atop defaults in /etc/default/atop
* Tue Aug 20 2019 kukuk@suse.de
- Package /etc/cron.d, as this is now part of cron which we don't
want to require
* Sun Feb 17 2019 Matthias Eliasson <matthias.eliasson@gmail.com>
- Update to 2.4.0
* Modifications for atop:
+ Support for Nvidia GPU statistics:
A separate daemon atopgpud has been developed to maintain statistics of
Nvidia GPUs in the system. When this daemon is running, atop will
connect to this daemon and will get/show the GPU statistics with every
interval on system level and process level (key 'e').
The atopgpud daemon will only be active when it is explicitly enabled
(see man pages for more info).
+ Support for Infiniband statistics:
Counters showing the bandwidth utilization of Infiniband ports
(system level) are added.
+ Support for Pressure Stall Information (PSI):
The average pressure percentages of CPU, memory and I/O are reported
for the last 10, 60 and 300 seconds. These percentage are provided from
kernel 4.20 onwards.
+ Faster startup of atop:
The allocation strategy for processes and threads has been improved,
which will specifically be noticable on larger systems with lots of
multi-threaded processes.
+ Configurable options for atop running in the background:
Default options of script atop.daily can be overruled by
/etc/default/atop file.
+ CPU Instructions Per Cycle (IPC):
For every CPU, the average number of instructions per CPU cycle is
shown as 'ipc'. Besides, a column is shown with the number of cycles
executed per second as `cycl` (shown as effective Hz frequency).
+ Various fixes:
Various NFS counters corrected.
Recognition of nvme and nbd disks.
Recognition of DEADLINE scheduling policy.
Proper handling of memory locking (improper handling caused malloc
failures in previous versions).
* New program atopconvert:
+ This program can be used to convert the layout of older raw files to
newer raw files. Raw files from atop 2.0 onwards can be converted to
the newest version (now: 2.4).
* Modifications for atopsar:
+ Reports can be printed now about the utilization of GPUs and Infiniband,
and about the PSI percentages.
* General:
+ The format of the raw file is incompatible with earlier versions.
However, old raw files can be converted now by the program atopconvert
to be read or extended by newer atop versions.
- Clean with spec-cleaner
- Refresh atop-makefile.patch
* Mon Jun 25 2018 rbrown@suse.com
- Correct copyright attribution
* Sun Jun 10 2018 antoine.belvire@opensuse.org
- Update to 2.3:
* Modifications for atop:
+ Support for Docker containers.
+ Improved gathering of process data.
+ Improved memory figures for processes.
+ Variable width for PID column.
+ Better handling when started via sudo (not entering stopped
+ state).
+ Handling of disk drives starting with 'xvd...'.
* Modifications for atopacct:
+ Better error handling of Netlink interface.
+ Immediate reaction when receiving SIGTERM signal.
+ Bypass for kernel bug 190711 (Netlink interface not
available).
+ Bypass for kernel bug 190271 (process accounting does not
always start).
* Modifications for atopsar:
+ Top-3 of resource consuming processes only shows active
processes now.
* General:
+ The format of the raw file is upward compatible with version
2.2-3.
- Clean with spec-cleaner.
* Tue Nov 22 2016 coolo@suse.com
- update to 2.2:
* Modifications for atop:
a. New keys for process selection:
'/' to select processes containing a particular search string in the command line arguments.
'I' to select processes running with particular PIDs.
b. New counters for NFS activity:
On system level, counters are maintained about NFS traffic. Three new labels are introduced for this purpose:
'NFS' for NFS server statistics (overall).
'NFC' for NFS client statistics (overall).
'NFM' for NFS client statistics per mounted NFS filesystem (so multiple lines possible).
c. New counters for OpenVZ containers:
CPU consumption and memory occupation are shown per container on system level (label 'CON').
Container ID and virtual PID are shown on process level (when using key 'v' or 's').
d. Bug fixes:
The maximum transfer rate larger than 1 Gbit for ethernet interfaces is now correctly shown.
The maximum transfer rate for wifi connections is now shown.
For interfaces in general, the maximum transfer rate is shown as a separate column ('sp').
Counters about virtual disk type 'xvd[a-z]' are shown.
Several minor bugs have been solved.
* Modifications for atopacct:
a. Avoid that process accounting is reactivated too frequently (and unnecessary).
* Modifications for atopsar:
a. Add flags for NFS traffic ('-n' for NFS mounts, '-j' for overall NFS
client activity and '-J' for overall NFS server activity).
* General:
a. Support for systemd-based distributions has been added.
b. The format of the raw file is incompatible with earlier versions. However,
the earlier version of atop is automatically activated when accessing an
older raw file.
- cleanup spec file - remove support for < 12.1
* Sat Oct 18 2014 pascal.bleser@opensuse.org
- update to 2.1:
* OpenVZ support: virtual environment identifier per process (envID)
* Bug solution: when the screen-width is larger than the total number of
columns to be printed, empty columns are added, however one column too many
* Removed useless empty column for memory statistics
* Introduce the 'G' key to suppress showing/accumulating exited processes
in the output
* Support CPU frequencies for systems with Intel P-state driver
* Introduction of new daemon atopacctd. This daemon switches on process
accounting and transfers every accounting record to an accounting shadow
file. The source accounting file will regularly be truncated, while the
shadow files are written with a limited size in a queued way. Non-used
shadow files are deleted regularly.
* Bug-solution: segmentation fault when one of the process names in the
system contains a newline
* Introduce configurable colors: in the atoprc file, colors can be defined
for information messages (default green), threads (default yellow), almost
critical resources (default cyan) and critical resources (default red).
* Limit the names of network interfaces to six characters max
* Introduction of proportional memory size (PSIZE) per process. For the
resident memory parts used by a process that are shared with other
processes, only a proportional part (shared memory part divided by the
number of sharers) is accounted to the process. Since the gathering of this
value is rather time-consuming (reading the smaps file of every process),
it is optional ('R' key or '-R' flag).
* Increased number of LVMs and disks supported
* Support for huge pages (total and in use).
/usr/bin/atop /usr/bin/atop-2.8.1 /usr/bin/atopcat /usr/bin/atopconvert /usr/bin/atopsar /usr/bin/atopsar-2.8.1 /usr/share/applications/atop.desktop /usr/share/doc/packages/atop /usr/share/doc/packages/atop/README /usr/share/licenses/atop /usr/share/licenses/atop/COPYING /usr/share/man/man1/atop.1.gz /usr/share/man/man1/atopcat.1.gz /usr/share/man/man1/atopconvert.1.gz /usr/share/man/man1/atopsar.1.gz /usr/share/man/man5/atoprc.5.gz
Generated by rpm2html 1.8.1
Fabrice Bellet, Tue Jul 9 20:22:04 2024