| Index | index by Group | index by Distribution | index by Vendor | index by creation date | index by Name | Mirrors | Help | Search |
| Name: flashrom-devel | Distribution: SUSE Linux Framework One |
| Version: 1.3.0 | Vendor: SUSE LLC <https://www.suse.com/> |
| Release: slfo.1.1.7 | Build date: Wed Aug 21 17:43:08 2024 |
| Group: Development/Tools/Other | Build host: h02-armsrv1 |
| Size: 18761 | Source RPM: flashrom-1.3.0-slfo.1.1.7.src.rpm |
| Packager: https://www.suse.com/ | |
| Url: https://flashrom.org/Flashrom | |
| Summary: A universal flash programming utility | |
flashrom is a utility for reading, writing, verifying and erasing flash ROM chips. It's often used to flash BIOS/EFI/coreboot/firmware images in-system using a supported mainboard, but it also supports flashing of network cards (NICs), SATA controller cards, and other external devices which can program flash chips. This package contains the headers needed to compile against libflashrom.
GPL-2.0-only
* Fri Sep 22 2023 adam@mizerski.pl
- Update to 1.3.0
- See changelog at https://www.flashrom.org/Flashrom/1.3
- Removed patches (merged upstream):
- flashrom-install-man-file.patch
- flashrom-j-link-spi.patch
* Sun Jul 24 2022 mgorse@suse.com
- Switch to meson
- Add flashrom-install-man-file.patch: install the man file when
using meson.
- Add flashrom-j-link-spi.patch: Add missing meson option for
J-Link SPI.
- Drop fix_aarch64.patch: no longer relevant.
- Package the library and headers.
* Thu Sep 09 2021 schwab@suse.de
- Enable build on riscv64
- Drop requires on dmidecode, no longer needed
* Fri Nov 27 2020 guillaume.gardet@opensuse.org
- Fix build on aarch64 with upstream patch:
* fix_aarch64.patch
* Thu Feb 20 2020 mardnh@gmx.de
- Update to version 1.2
- Meson support
- Layout improvements/fixes and many, many code cleanups.
- New chips: MX25U25635F, MX25L51245G, GD25Q256D, M95M02-A125,
N25Q/MT25Q variants, W25Q128JW_DTR, AT25SF321, S25FL512S
- New programmers: National Instruments USB-845x, Tin Can Tools
Flyswatter/Flyswatter 2, STLINK V3, more Intel PCHs (Apollo
Lake, Cannon Lake variants, Ice Lake U)
- Reduced dependency on libusb0
- Syntax: Added --flash-name and --flash-size arguments to print
information about the flash chip
* Sun Jun 23 2019 mardnh@gmx.de
- Update to version 1.1
New major user-visible features
* 4-byte address support for many SPI programmers
* New option to use a reference file for flash contents
(--flash-contents)
* Layout support for coreboot's FMAP format (--fmap, --fmap-file)
* BAUD rate selection for Buspirate SPI
* Support for the ENE Embedded Debug Interface (EDI), probably
our first non-jedec SPI target
* On Intel ME enabled systems, internal flashing is allowed by
default
New programmers
* ENE Embedded Debug Interface EDI
* Linux' MTD interface
* Digilent SPI for the iCEblink40 development board
* Developerbox/CP2104 bit banging
* J-Link SPI
* Dediprog firmwares >= 7.2.30
* Dediprog SF200
* Intel Kabylake PCHs
Support for lots of new chips
* Sun Mar 31 2019 mardnh@gmx.de
- Update to version 1.0.1
* linux_spi: Reduce maximum read chunksize
* Hardcode default spispeed of 2MHz
Default speed of kernel drivers isn't always sane (any more).
* Fix dmi_match string for ThinkPad X201
* verification with sparse layouts
* Fix erasing of unaligned regions
* Wed Jan 03 2018 mardnh@gmx.de
- Update to version 1.0
* Support layouts for read and erase commands
* New command line switch --noverify-all (-N) allows flashing of
individual regions without reading the whole flash chip
(particular useful with locked down Intel ME firmware)
* New command line switch --ifd to read the layout from an
Intel Firmware Descriptor on flash
* We got rid of the delay-loop calibration (if the OS provides an
accurate timer through clock_gettime())
* Reading speed of USB programmers should have increased (reading
bigger chunks at once, we reduce the overhead)
* Support Intel 100 series PCHs (Sunrise Point, coupled with
Skylake and Kaby Lake) and C620 series PCHs (Lewisburg paired
with Workstation/Server versions of the former)
* New programmers
+ Intel 100 series / C620 series PCHs
+ Intel I210 NICs (EEPROM and SPI)
+ AMD Merlin Falcon (FP4)
* New chips
+ W25Q128.W
- Specfile cleanup
- Verify source signature
* Wed Apr 26 2017 agraf@suse.com
- Enable build for ARM
* Tue Jul 26 2016 glin@suse.com
- Update to 0.9.9
* Enable the dediprog module by default, add support for Dediprog
SF600 and the new communication protocol of the SF100 with
newer firmware
* Add support to update the firmware of Promise UltraATA
controllers
* Support new programers: WCH CH341A, VIA VT8251
* Support new chips:
+ ESI ES25P40, ES25P80, ES25P16
+ GigaDevice GD25VQ41B, GD25Q128C, GD25VQ21B, GD25VQ40C,
GD25VQ80C and GD25VQ16C, GD25LQ40, GD25LQ80, GD25LQ16,
GD25LQ64(B), GD25LQ128
+ PMC Pm25LQ020, Pm25LQ040, Pm25LQ080, Pm25LQ016, Pm25LQ032C
+ Sanyo LE25FU406C/LE25U40CMC
+ SST SST25WF020A, SST25WF040B, SST25WF080B
+ Winbond W29C512A/W29EE512
* Allow to link flashrom statically (with make CONFIG_STATIC=yes)
* Ease debugging of build problems with libraries
* Ignore 0x00 as a flash chip manufacturer ID in the generic
match to avoid ambiguous messages
* Various improvements for serprog-based programmers
* Add support for libftdi1
* Add infrastructure for libusb1 and use it for new programmers
* Rigorously check integrity of I/O stream data
* Add make parameters for easier disabling/enabling of various
classes of programmers
* Fri Apr 03 2015 mpluskal@suse.com
- Update to 0.9.8
* A bunch of newly supported architectures: ARM 64bit,
big-endian ARM, PowerPC 64bit, SPARC.
* Better support for AMD chipsets in general (speed selection,
more conservative defaults etc.).
* Add new programmer support:
* AMD Yangtze's SPI controller (found in Kabini and Tamesh) as
well as the one in Bolton FCHs (A78, A88X, A77E).
* Intel Silvermont chipsets (Bay Trail, Rangeley and Avoton) and
Wildcat Point (for Broadwell).
* ITE IT8212F parallel programmer as it8212 (found on PCI SATA
RAID controllers).
* VIA VT6421A LPC programmer as atavia (found on PCI SATA
controllers).
* EEPROMs on Intel network cards based on the 82580 NIC
(nicintel_eeprom).
* Intel 82599 10 GbE NICs boot PROMs (part of nicintel_spi).
* Microchip PICkit 2
* MSTAR I²C ISP protocol (not compiled in by default). Rewrites the
firmware of your screen over VGA/DVI(!).
* Extension of the rayer_spi module to supported various similar
devices (Altera ByteBlasterMV, Atmel STK200/300, Wiggler LPT).
* Switching betweens chips on boards with GIGABYTE's DualBIOS
(using the dualbiosindex programmer parameter).
* Enable fwh_idsel parameter for C-ICH and ICH2/3/4/5 chipsets.
* Finer-grained display of support status used for flash chip
operations, chipsets, mainboards and programmers (new states:
configuration-dependent, not applicable).
* Thu Oct 30 2014 crrodriguez@opensuse.org
- Build Require libusb-devel, fix build in factory
* Thu Oct 30 2014 stepan@coresystems.de
- update to 0.9.7 r1852.
* Thu Aug 15 2013 p.drouand@gmail.com
- Update to version 0.9.7
+ see http://flashrom.org/Flashrom/0.9.7 for changes
- Use official tarball instead of generated one from svn
- Let RPM strips manpage himself;
- Change Url to real one
* Wed Mar 13 2013 cfarrell@suse.com
- license update: GPL-2.0
No indication of aggregation
* Tue Mar 05 2013 coolo@suse.com
- update license to new format
* Sun Sep 23 2012 kernel01@hailfinger.org
- Update to 0.9.6.1
* Thu Oct 27 2011 crrodriguez@opensuse.org
- update to 0.9.4 r1457.
* Mark several new boards as supported/unsupported
* Thu Oct 13 2011 stepan@coresystems.de
- update to 0.9.4 r1450.
* support more devices
- Fix update-snapshots script when running svn with locales other
than english.
* Tue Oct 04 2011 kernel01@hailfinger.org
- Update flashrom from 0.9.4-beta to 0.9.4
* Fixes for crashes and corruption in corner cases
* Sun Sep 18 2011 jengelh@medozas.de
- Apply packaging guidelines (remove redundant/obsolete
tags/sections from specfile, etc.)
* Thu Jun 02 2011 stepan@coresystems.de
- update to 0.9.3 r1322.
* Thu Mar 31 2011 stepan@coresystems.de
- update to 0.9.3 r1283.
* Thu Dec 09 2010 stepan@coresystems.de
- update to 0.9.3 r1246.
- split package into coreboot-utils and flashrom
- add update-snapshots script
* Wed Sep 02 2009 kernel01@hailfinger.org
- Update flashrom to from 0.9.1-rc1 to 0.9.1
* Bug fixes and documentation fixes only
- Update nvramtool to r4625
* Fix HIGH_TABLES
* Install manpage in section 8 instead of section 1
* Mon Aug 24 2009 kernel01@hailfinger.org
- Update flashrom description
- Add nvramtool description
- Use RPM_OPT_FLAGS, drop custom CFLAGS/LDFLAGS
- Install nvramtool in sbin because it's only usable as root
* Tue Aug 18 2009 kernel01@hailfinger.org
- Update flashrom to version 0.9.1-rc1
* Support for more external flashers
* Universal external flasher protocol
* Automatic write/erase verification
* Dozens of added flash chips, chipsets, mainboards
* No root privileges needed for most external flashers
* Improved more verbose user interface
* Speedups: Fast bus type dependent probing, 100x faster write for
some chips
* Reliability fixes for buggy hardware, corner case spec
conformance
* Mon Jun 22 2009 trenn@suse.de
- Update coreboot-utils to version 0.9.0
* Thu Jan 08 2009 bbrunner@suse.de
- update nvramtool to svn release r3852
- update flashrom to svn release r3852
* Wed Oct 15 2008 bwalle@suse.de
- update nvramtool to svn release r3613
- update flashrom to svn release r3659
* Wed Aug 13 2008 ro@suse.de
- add ExclusiveArch
* Mon Mar 17 2008 bwalle@suse.de
- rename lxbios to nvramtool
- update nvramtool to svn release r3124
- update flashrom to svn release r3153
* Sat Jan 19 2008 bwalle@suse.de
- update to svn release r3061
o Support SPI flash chips bigger than 512 kByte sitting behind
IT8716F Super I/O performing LPC-to-SPI flash translation.
o Enable MX25L8005 support in flashrom.
o Minor changes.
- add lxbios utility
* Thu Jan 10 2008 bwalle@suse.de
- initial package
/usr/include/libflashrom.h /usr/lib64/libflashrom.so /usr/lib64/pkgconfig/flashrom.pc
Generated by rpm2html 1.8.1
Fabrice Bellet, Sat Nov 9 00:25:40 2024