| Index | index by Group | index by Distribution | index by Vendor | index by creation date | index by Name | Mirrors | Help | Search |
| Name: libopenmpt0-debuginfo | Distribution: SUSE Linux Framework One |
| Version: 0.6.10 | Vendor: SUSE LLC <https://www.suse.com/> |
| Release: slfo.1.1.3 | Build date: Fri Jun 14 23:21:17 2024 |
| Group: Development/Debug | Build host: ibs-power9-12 |
| Size: 24102772 | Source RPM: libopenmpt-0.6.10-slfo.1.1.3.src.rpm |
| Packager: https://www.suse.com/ | |
| Url: https://lib.openmpt.org/libopenmpt/ | |
| Summary: Debug information for package libopenmpt0 | |
This package provides debug information for package libopenmpt0. Debug information is useful when developing applications that use this package or when debugging this package.
BSD-3-Clause
* Tue Apr 18 2023 antonio.teixeira@suse.com
- Update to 0.6.10
* [Bug] File probing and loading results could be inconsistent
for SFX files, so that probing could claim that a file is
definitely not playable even if it would be.
* MOD: VBlank heuristics are now applied to MOD files with M!K!
signature. Fixes mod.siedler ii.
* NoiseTracker MODs are now always played with VBlank timing.
* MED: Add support for default instrument pitch.
* MED: Global play transpose value was not considered for MMD0
files.
* 669: Reject files with lots of control characters in song
message.
* mpg123: Update to v1.31.3 (2023-03-19).
* Wed Mar 29 2023 mia@0x0.st
- Update to 0.6.9
* [Bug] An exception could be thrown during rendering when trying
to access the release node of an empty envelope.
* The fix for the OPL cutoff bug introduced in libopenmpt 0.6.7
was incomplete.
* ULT: Offset commands exceeding 65535 samples were sometimes not
imported correctly even if there was room for them.
* After seeking with seek.sync_samples=1, the filter settings of
playing notes were not updated since libopenmpt 0.6.7.
* Loading of and seeking inside (malformed) modules with
thousands of short sub-songs has been sped up.
* Sat Feb 04 2023 dmueller@suse.com
- update to 0.6.8:
* [Bug] DSYM: Loading DSYM files got broken in 0.6.7.
* When seeking around in a module, the tempo was sometimes
incorrectly limited to 255 BPM
* Initial instrument cutoff was broken for OPL instruments in
libopenmnpt 0.6.7
* mpg123: Update to v1.31.2
* Mon Jan 09 2023 mia@0x0.st
- Update to 0.6.7
* IT: In sample mode, portamento to a different sample turns off
the filter if cutoff / resonance was previously 127 / 0.
* S3M Detect files saved with Graoumf Tracker instead of claiming
they were made with OpenMPT 4.47.
* S3M: Pattern loop state was not propagated anymore since
libopenmpt 0.6.0, leading to wrong song length calculation and
SB0 + SBx being located on different channels not working
properly anymore.
* Thu Sep 29 2022 mia@0x0.st
- Update to 0.6.6
* [Sec] Possible crash when playing manipulated IT / MPTM files
with a T00 command.
* MTM: In MultiTracker, setting speed and tempo are mutually
exclusive commands. Still, some MultiTracker modules were made
to be played with external players such as DMP, so they
actually rely on “standard” speed / tempo behaviour. Decide
which behaviour to use by checking of speed and tempo commands
are found on the same row.
* MTM: Ignore sample loops if the loop end is <= 2.
* Echo DMO: Migrate left and right delay values in modules made
with OpenMPT versions between 1.27.01.00 and 1.30.05.00 to the
correct interpretation.
- Changes in 0.6.5:
* [Bug] Makefile now also uses CC, CXX, LD, and AR when set as
environment variables.
* [New] Makefile now uses PKG_CONFIG as path to pkg-config.
* DBM: Sample middle-C frequencies were slightly off.
laffik_-_marynarze.dbm sounds much more bearable now.
* DBM: Fixed pattern break parameter interpretation.
* Echo DMO: Setting the delay parameter to 0 yielded a 2-second
echo delay instead of 1ms.
* Digi Booster Echo: Setting the delay parameter to 0 yielded a
510ms echo delay instead of approximately 334ms.
* Wed Jun 15 2022 mia@0x0.st
- Update to 0.6.4
* Fix: Ping-pong sample loops sometimes stopped playing at the
end of the loop.
* Mon May 16 2022 danilo.spinella@suse.com
- Update to 0.6.3:
* Pitch / Pan Separation and Random Variation instrument properties
were not resetting properly when seeking, potentially causing
instruments to be played e.g. at a vastly different pan position
compared to playing the module continuously.
* MED: Stereo samples were not imported correctly.
* Thu Mar 31 2022 danilo.spinella@suse.com
- Update to 0.6.2:
* [**Sec**] Possible out-of-bounds write in malformed IT / XM / MPTM files
using the internal LFO plugin. (r17076)
* [**Sec**] Possible out-of-bounds read when using Amiga BLEP interpolation
with extremely high-pitched notes. (r17078, r17079)
* ISO-8859-1-related charsets from Amiga OS and RISC OS are now handled more
accurately, thus avoiding some unwanted control characters.
* MO3: Pattern indices 254 / 255 were not treated as playable patterns even if
the original file was a MOD / XM.
* Correctly apply ST3-style effect memory when seeking in S3M files.
* Command S (S3M / IT style) effect memory was not applied when seeking.
* Initial channel mute status was not reported correctly in `get_channel_mute_status`
since libopenmpt 0.6.0.
- Fix build on Leap by using GCC-11 as charconv header is only included
from GCC-8 onwards
* Mon Jan 31 2022 mia@0x0.st
- Update to 0.6.1:
* [Bug] Possible hang with malformed DMF, DSM, MED, MUS, OKT and
SymMOD files containing 65536 or more patterns when destroying
the module.
* [Bug] Avoid NaNs and infinite values with custom tunings and in
the I3DL2Reverb plugin.
* MIDI macros are now evaluated when seeking.
* The letter “z” is now evaluated in fixed MIDI macros (Z80…ZFF)
the same way as in Impulse Tracker.
* MOD: Loosened VBlank timing heuristics so that “frame of mind”
by Dascon plays correctly.
* MOD: Validate the contents of “hidden” patterns beyond the end
of the order list when the file size matches the expected size
when only taken “official” patterns into account. This fixes
Shofixti Ditty.mod from Star Control 2 while keeping other
(partly broken) modules working.
* MED: Command 20 (reverse sample) is now only applied when it’s
next to a note.
* S3M: Introducing the “Send OPL key-off when triggering notes”
compatibility setting broke retrigger for OPL notes again
(they retriggered rather than not retriggering).
* S3M: Retriggering a note no longer resets its pitch after a
portamento.
* S3M: Partially implement retrigger behaviour for stopped notes
in SoundBlaster mode: Like in IT, it is not possible to
retrigger a sample that has already stopped playing.
* DIGI: Improve compatibility with E3x reverse sample command.
* DSym: Tempos < 32 were treated as tempo slides.
* SymMOD: Key-off command was not implemented properly.
- Changes in 0.6.0:
* [New] MUS files from Psycho Pinball and Micro Machines 2 are
now supported.
* [New] SymMOD files created with Symphonie / Symphonie Pro are
now supported.
* [New] FMT files created with Davey W Taylor’s FM Tracker are
now supported.
* [New] DSYM files created with Digital Symphony are now
supported.
* [New] STX files (transitional format between Scream Tracker 2
and 3) are now supported.
* [New] TakeTracker MODs with TDZ1 to TDZ3 magic bytes are now
supported.
* [New] libopenmpt_ext: New interface interactive2 adding
openmpt::ext::interactive2::note_off(),
openmpt::ext::interactive2::note_fade(),
openmpt::ext::interactive2::set_channel_panning(),
openmpt::ext::interactive2::get_channel_panning(),
openmpt::ext::interactive2::set_note_finetune(),
and openmpt::ext::interactive2::get_note_finetune() (C++)
and openmpt_module_ext_interface_interactive2.note_off(),
openmpt_module_ext_interface_interactive2.note_fade(),
openmpt_module_ext_interface_interactive2.set_channel_panning(),
openmpt_module_ext_interface_interactive2.get_channel_panning(),
openmpt_module_ext_interface_interactive2.set_note_finetune(),
and openmpt_module_ext_interface_interactive2.get_note_finetune() (C).
* [Change] libopenmpt no longer generates internal interpolation
tables on library load time, but instead only on first module
load time.
* libopenmpt can now detect infinite pattern loops and treats
them as the song end. This means that setting a repeat count
other than -1 now always guarantees that playback will
eventually end. The song loop counter is decremented each time
it ends up at the start of the infinite loop, so the song does
not restart from the beginning even if the repeat count is not
0.
* openmpt::module::set_position_seconds() accuracy has been
improved for modules with pattern loops.
* Samples played at the wrong volume when rendering modules in
mono.
* IT: Portamentos in files with Linear Slides disabled are now
more accurate.
* IT: Pitch/Pan Separation was affected by note-off commands,
and wasn’t reset by panning commands like in Impulse Tracker.
* IT: Even after libopenmpt 0.5.14 the filter reset logic was
still not 100% identical to Impulse Tracker: A note triggered
on tick 0 of a row with a Pattern Delay effect still caused the
filter to be reset on repetitions of that row even though the
note wasn’t retriggered.
* IT: Added read-only support for BeRoTracker commands 1 and 2
(equivalent to XM commands K and L).
* XM: BeRoTracker saves smooth MIDI macros in a different way
from OpenMPT. This command is now imported correctly.
* XM: Emulate FT2 Tone Portamento quirk that inverts portamento
direction after the target was reached (if target note was
higher than previous note).
* S3M files saved with Impulse Tracker and latest Schism Tracker
now also compute sample playback speed in Hertz.
* Depending on whether an S3M file was last saved in Scream
Tracker with the Sound Blaster or Gravis Ultrasound drivers
loaded, different compatibility flags are now applied. For
files saved with the GUS, the sample volume factor is now also
ignored (fixes volume levels in S3Ms made on the GUS,
in particular if they use both samples and OPL instruments).
* S3M: Enforce the lower frequency bound.
* MOD: Loosened VBlank timing heuristics so that the original
copy of Guitar Slinger from Dizzy Tunes II plays correctly.
* FAR: Correct portamento depth is now used.
* DMF / IMF: Improved accuracy of finetune commands.
* MDL: Implemented finetune command.
* OKT: Various accuracy improvements such as: Sharing volume
between mixed channels, volume commands on mixed channels are
permanent (not reset with new notes), mixed channels do not
support default sample volume, 7-bit samples are actually
supposed to be played as-is (not amplified to full 8-bit
range), reject speed command parameters >= 20.
* Thu Dec 23 2021 mia@0x0.st
- Update to 0.5.14:
* [Sec] Possible out-of-bounds read in Chorus plugin with NaN
plugin parameters. Most implementations of the “fast math”
compiler optimizations will prevent this crash but it is not
guaranteed. (r16096)
* [Bug] Fixed undefined behaviour with custom tunings found with
ubsan.
* OPL: Improved channel allocation strategy when there are lots
of faded-out notes.
* MOD: Digital Tracker MODs have four unknown bytes right after
the magic bytes which seem to be ignored even by Digital
Tracker itself. Just skip over them.
* The logic when to turn off the resonant filter was broken in
some edge cases since libopenmpt 0.5.1.
* IMF: Implemented XE1-XE3 commands, which disable individual
envelopes. Command Nxy (cutoff slide + resonance) is now also
partially supported (only resonance for now).
* IMF: Filter envelopes were upside down.
* MTM: Omitting pattern loading through the load.skip_patterns
ctl caused sample data to be corrupted.
* S3M: Ignore O00 commands in files created with Scream Tracker
3.00 and 3.01, as this command only gained effect memory in
version 3.03.
* STM: Use S3M-like sample swap behaviour.
* XM: Disable arpeggio quirk for XMs made with Skale Tracker.
Fixes KAPTENFL.XM.
* Wed Dec 01 2021 danilo.spinella@suse.com
- Update to 0.5.13:
* [Bug] Fixed various undefined behaviour found with ubsan.
* IMF: Change envelope interpretation to be more like in XM instead of
IT and tighten header validation.
* MED: Some samples had a ping-pong loop when there should be no loop at all.
* MT2: Ignore incorrect drums chunk size in early MT2 files (fixes e.g.
“A little Rock” by Csumi).
* MT2: Work around initial master volume of 0 used in some files that apply
a fade-in a the song start using track automation that would stay silent
forever otherwise (track automation is currently not supported).
* OKT: Apply portamento on every tick.
* mpg123: Update to v1.29.2 (2021-10-23).
* Fri Oct 22 2021 danilo.spinella@suse.com
- Update to 0.5.12:
* [Sec] Possible crash when loading malformed MDL files. (r15603)
* [Bug] Fixed various undefined behaviour found with ubsan.
* Seeking with sample sync sometimes didn’t compute the correct
sample position with pingpong-looped samples.
* IT: Tremor command I11 erroneously behaved like I00 (use previous
parameter) unless IT Old Effects were enabled.
* PTM: Panning was translated wrong in some edge cases.
* IMF / PTM: Note Slide commands were sometimes slightly off.
* OKT: Better support for fine note slides.
* DBM: Echo enable effect parameter range checks were incorrect.
* XM: Sample texts in XMs made with MadTracker are now also
decoded using Windows-1252 encoding.
* in_openmpt: Song metadata is no longer reverted when viewing
file info.
* mpg123: Update to v1.29.0 (2021-09-06).
* Mon Aug 23 2021 mia@0x0.st
- Update to 0.5.11:
* [Sec] Possible crash with malformed modules when trying to
access non-existent plugin slots FX251-FX255.
* [Sec] Possible read beyond sample start after swapping to a
sample with loop points set but not loop enabled.
* [Sec] Fixed various possible crashes with malformed MMCMP
files.
* [Sec] MED: Possible read past end of sequence name
(stack-allocated, so relatively unlikely to result in a
crash).
* Fixed excessive memory usage with files claiming to have an
extremely high rows per beat count while also using tempo
swing. Maximum rows per beat are now limited to 65536.
* STP: Avoid creating thousands of patterns when loading
malformed files even though no more pattern data can be read.
* Sun Jul 11 2021 mia@0x0.st
- Update to 0.5.10:
* S3M: Honor the Stereo flag not being set. This improves the
sound of some tunes like Turbulence by Purple Motion.
* S3M: Detect MPT 1.0 alpha versions which didn’t set the Stereo
flag. In this case, the unset Stereo flag is also ignored
because MPT 1.0 alpha used the default S3M channel panning
anyway.
* S3M: Only for OPL instruments the high sample rate bits should
be ignored; for PCM instruments they are clamped to 65535 Hz.
* MOD: Do not apply ProTracker loop length quirk to MODs that
could have been made with Scream Tracker (fixes Soul-O-Matic
by Purple Motion).
* AMF (DSMI): Format revisions 1 and 9, as well as early
(technically malformed) revision 10 files, are now supported.
Surround panning commands and instrument number without note
are now converted correctly.
* AMF (DSMI): Patterns and samples were not read correctly in
some files (e.g. AVOID.AMF).
* GDM: Correctly import extra-fine portamentos.
* Wed Jun 23 2021 mia@0x0.st
- Update to 0.5.9:
* The retrigger effect didn’t work correctly for OPL instruments
in some cases depending on the chosen output sample rate.
* S3M: Emulate IT short sample retrigger quirk in S3M files saved
with Impulse Tracker and Schism Tracker.
* ProTracker 3.6 doesn’t support sample swapping. It is now
disabled when loading a ProTracker 3.6 IFF module.
* Some files with “hidden” garbage patterns were not played
correctly since libopenmpt 0.5.3.
* MOD: E9x retrigger now works the same way as in ProTracker 2.
* MDL: Improve auto-vibrato accuracy.
* 669: Reject files that contain any pattern tempo higher than
15.
* Reduce memory consumption of malformed XPK-compressed files.
* Tue Apr 20 2021 mia@0x0.st
- Update to 0.5.8:
* [Sec] Possible null-pointer dereference read caused by a
sequence of openmpt::module::read,
openmpt::module::set_position_order_row pointing to an invalid
pattern, and another openmpt::module::read call. To trigger the
crash, pattern 0 must not exist in the file and the tick speed
before the position jump must be lower than the initial speed
of the module.
* [Bug] libopenmpt 0.5.7 broke seeking in some subsongs.
* The built-in LFO plugin did not load the correct initial LFO
frequency.
* IT command S7x (instrument control) is now supported when
seeking with sample sync enabled.
* libopenmpt_ext play_note was cutting of channels even when
there were plenty of free channels to use.
* Sat Mar 20 2021 mia@0x0.st
- Update to 0.5.7:
* [Sec] Possible null-pointer dereference read caused by a
sequence of openmpt::module::read,
openmpt::module::set_position_seconds with a position past the
song end, and another openmpt::module::read call.
* IT: Instrument / sample panning was reset on note-off / fade
commands.
* IMF: Set Finetune is now implemented correctly.
* Fixed excessive memory consumption with malformed files in
various formats.
* Sun Mar 14 2021 mia@0x0.st
- Update to 0.5.6:
* AMS: Avoid allocating excessive amount of memory for compressed
song message in malformed files.
* S3M: Some samples or OPL patches were imported with a too high
sample rate if module was saved with Scream Tracker 3.
* Tue Feb 02 2021 mia@0x0.st
- Update to 0.5.5:
* [Bug] stb_vorbis: Fix decoding of Vorbis streams without
comments which affected most Vorbis samples since stb_vorbis
v1.20.
* openmpt::ext::interactive::set_pitch_factor wasn’t applied to
OPL voices.
* OPL channel state (in particular current patch) is now updated
when seeking.
* The FT2 tremolo quirk is now also applied to MOD files.
FT2 just copied the quirky code from ProTracker!
* DMF: Preserve effects better in some situations where there is
more than one effect in a pattern cell.
* DMF: Improve import of finetune effect with parameters larger
than +/-15.
* Wed Dec 16 2020 mia@0x0.st
- Update to 0.5.4:
* AMS: An upper bound for uncompressed sample size is now
established to avoid memory exhaustion from malformed files.
* DMF: Support early format beta versions (in particular versions
1-4).
* MED: Also use octave wrapping in 8-channel mode for MMD0/MMD1
modules.
* MED: If 8-channel mode is activated, ignore BPM mode.
* MED: Emulate tempo commands F01 and F02 quirk.
* MED: Tempo commands below 32 BPM were interpreted as tempo
slides.
* IMF: Instrument sample mapping was off by one octave, notable
in the guitar part of Astaris by Karsten Koch.
Changes in 0.5.3:
* [Sec] Possible hang if a MED file claimed to contain 256 songs.
* [Bug] libopenmpt: openmpt::is_extension_supported2() exported
symbol was missing (C++).
* [Bug] openmpt::module::set_position_seconds sometimes behaved
as if the song end was reached when seeking into a pattern loop
and in some other corner cases.
* Increase threshold for ignoring panning commands from 820 to
830.
* Subsong names now fall back to the first pattern’s name if
empty.
* MO3: Avoid certain ModPlug hacks from being fixed up twice,
which could lead to e.g. very narrow pan swing range for old
OpenMPT IT files saved with a recent MO3 encoder version.
* MO3: Some files with corrupted envelope data could be rejected
completely (normally libopenmpt should fix up the envelope
data).
* MO3: Song metadata didn’t correctly identify MPTM as source
format (it appeared as IT instead).
* STM: Change tempo computation to behave like Scream Tracker 2.3
instead of Scream Tracker 2.2, as the playback frequencies we
use for sample playback are closer to those of Scream Tracker
2.3.
* PLM: Percentage offset (Mxx) was slightly off.
* WOW: Fix loading of several files and harden WOW detection.
Changes in 0.5.2:
* PP20: The first few bytes of some files were not decompressed
properly, making some files unplayable (depending on the
original format).
Changes in 0.5.1:
* [Bug] libopenmpt/libopenmpt.h failed to compile with
LIBOPENMPT_NO_DEPRECATE defined.
* MPTM: Qxy now retriggers OPL notes if new compatibility flag is
set in file.
* MPTM: Bring back old OPL note end-of-envelope behaviour for
files made with OpenMPT 1.28.
* IT: Global volume slides with both nibbles set preferred the
“slide up” nibble over the “slide down” nibble in old OpenMPT
versions, unlike other slides. Such old files are now imported
correctly again.
* IT: Fixed an edge case where, if the filter hit full
cutoff / no resonance on the first tick of a row where a new
delayed note would be triggered, the filter would be disabled
even though it should stay active. Fixes trace.it by maddie.
* OXM: Some sample loops were not imported correctly.
* XM: Out-of-range arpeggio clamping behaviour broke in OpenMPT
1.23.05.00. The arpeggios in Binary World by Dakota now play
correctly again.
* S3M: Support old-style sample pre-amp value in very early
S3M files.
* S3M: Only force-enable fast slides for files ST 3.00.
Previously, any S3M file made with an ST3 version older than
3.20 enabled them.
* S3M: Only apply volume and middle-C speed on instrument change
if the new sample slot has sample data.
* MOD: Fix an infinite loop in GamerMan by MrGamer by playing
non-ProTracker MODs more like FT2 would.
* M15: Improve tracker detection heuristics to never assume
SoundTracker 2.0 if there is a huge number of Dxx commands,
as that is a definite hint that they should be treated as
volume slides. Fixes Monty On The Run by Master Blaster.
* MO3: Support OPL patches in MO3 files created from MPTM and S3M
* DBM: If a global pattern command would be lost because both
effect commands in a cell would have to go into the regular
effect column (e.g. a speed and a tempo command), the lost
command is now attempted to be written into a different cell
on the same row. Fixes “Party-Question V” by grogon.
* Sun Jun 07 2020 davejplater@gmail.com
- Remove devel packages requirement on obsolete modplug
* Sun May 24 2020 mia@0x0.st
- Drop libmodpulg-pcfile.patch
- Update to 0.5.0:
* [New] OggMod compressed FastTracker 2 XM (OXM) modules are now
supported.
* [New] The emulated Amiga type when Amiga resampler emulation
is enabled can now be selected via ctl
render.resampler.emulate_amiga_type.
Possible values are: "auto", "a500", "a1200",
and an experimental option "unfiltered".
* [New] libopenmpt: New API
openmpt::module::get_current_estimated_bpm() (C++),
and openmpt_module_get_current_estimated_bpm() (C)
which provides accurate beats per minute information for
module formats with time signature and an educated guess
based on speed and tempo for others.
* [New] libopenmpt: New type-aware ctl APIs that do not require
memory allocations and are thus realtime-safe:
openmpt::module::ctl_get_boolean(),
openmpt::module::ctl_get_integer(),
openmpt::module::ctl_get_floatingpoint(),
openmpt::module::ctl_get_text(),
openmpt::module::ctl_set_boolean(),
openmpt::module::ctl_set_integer(),
openmpt::module::ctl_set_floatingpoint() (C++),
and openmpt_module_ctl_get_boolean(),
openmpt_module_ctl_get_integer(),
openmpt_module_ctl_get_floatingpoint(),
openmpt_module_ctl_get_text(),
openmpt_module_ctl_set_boolean(),
openmpt_module_ctl_set_integer(),
openmpt_module_ctl_set_floatingpoint() (C).
* [New] libopenmpt C++ New API
openmpt::is_extension_supported2() which takes a
std::string_view parameter instead of std::string.
* [New] libopenmpt C++: New API
openmpt::module::module(std::vector<std::byte> data),
openmpt::module::module(const std::byte * data, std::size_t size),
openmpt::module::module(const std::byte * beg, const std::byte * end).
* [New] libopenmpt C++: New API
openmpt::probe_file_header(flags, const std::byte * data, std::size_t size, filesize),
openmpt::probe_file_header(flags, const std::byte * data, std::size_t size).
* [New] libopenmpt_ext C++: New API
openmpt::module_ext::module_ext(std::vector<std::byte> data),
openmpt::module_ext::module_ext(const std::byte * data, std::size_t size),
openmpt::module_ext::module_ext(std::vector<std::uint8_t> data),
openmpt::module_ext::module_ext(const std::uint8_t * data, std::size_t size).
* [Change] std::istream based file I/O has been speed up.
* [Change] Dependency on iconv on Linux has been removed.
* [Regression] libmodplug: The libmodplug emulation layer has
been removed from the libopenmpt tree. Please use the separate
libopenmpt-modplug package instead.
* [Regression] Support for building with C++11 or C++14 has been
removed. C++17 is now required to build libopenmpt.
* [Regression] Support for client code using C++11 or C++ 14 has
been removed. C++17 is now required to build libopenmpt client
applications.
* [Regression] Support for GCC 4.8, 4.9, 5, 6 has been removed.
* [Regression] Support for Clang 3.6, 3.7, 3.8, 3.9, 4 has been
removed.
* [Regression] Support for Emscripten versions older than 1.39.1
has been removed.
* [Regression] openmpt123: Support for SDL1 (but not SDL2) output
has been removed.
* [Regression] openmpt123: Support for SDL2 older than 2.0.4 has
been removed.
* [Regression] It is no longer possible to optionally use iconv
for character set conversions.
* [Bug] openmpt123: openmpt123 now honors the current locale and
outputs text appropriately.
* Greatly improved MED import. Synthesized instruments are still
not supported but support was added for: Multisampled
instruments, delta samples, more pattern commands,
Hold and Decay, VSTi and MIDI output, multiple songs and
many other small changes.
* Improved OPL channel allocation when more than 18 notes are
active, so that channels that have completely faded out are
prioritized over channels that have already been released but
have not faded out yet.
* Interactively triggering an OPL instrument could cause the
first pattern channel to no longer be played back correctly.
* Fix some inaccuracies in OPL emulator.
* Fix overflow of OPL amplification happening at a synth
volume level of 510.
* End-of-sample pop reduction of surround channels was applied
to front channels instead, causing a pop on the front channels
instead of removing it on the back channels.
* IT: Disable retrigger with short notes quirk for modules saved
with Chibi Tracker, as it does not implement that quirk.
* IT: Instrument and sample panning should not override channel
panning for following notes.
* IT: SBx is now prioritized over Bxx commands that are to the
left of it.
* IT: Duplicate Check Type “Sample” should only be applied if
the instruments match, too.
* IT: Duplicate Check Type “Note” should compare pattern notes,
but it was comparing the new pattern note against the old
translated note.
* IT: Various fixes for envelope resetting.
* IT / S3M: When combining SBx and EEx effects, don’t skip the
first row of the loop like in FastTracker 2.
* S3M: Empty pattern commands now affect effect memory as well.
* S3M: Offset beyond loop end wraps around to loop start like in
Scream Tracker 3 + GUS (previously it just keep playing from
the loop start, which is neither what GUS nor Sound Blaster
drivers do).
* S3M: Notes cannot be retriggered after they have been cut.
* S3M: Fix portamento after note cut
(fixes antediluvian_song.s3m).
* S3M / MOD: Previous note offset is no longer used for
retriggered notes if there was no instrument number next to
the Qxy effect.
* MOD: Sample swapping now also works if the sample that is being
swapped from does not loop. Swapping to a non-looped sample now
stops playback once the swapped-from sample reaches its (loop)
end.
* MOD: Fix early song ending due to ProTracker pattern jump quirk
(EEx + Dxx on same row) if infinite looping is disabled.
Fixes Haunted Tracks.mod by Triace.
* MOD: Previous note offset is no longer used for retriggered
notes if there was no instrument number next to the E9x effect.
* MOD: Vibrato type “ramp down” was upside down.
* XM: If a file contains patterns longer than 1024 rows,
they are now clamped to 1024 rows instead of 64 rows.
* XM: Do not reset note-off status on portamento if there is no
instrument number.
* Mon Apr 13 2020 mia@0x0.st
- Update to 0.4.12:
* IT: Vibrato was too fast in Old Effects mode since
libopenmpt 0.3.
* XM: Treat 8bitbubsy’s FT2 clone exactly like Fasttracker 2 with
respect to compatibility and playback flags. For example,
FT2 Pan Law was not applied.
* DMF: Some files had a wrong tempo since
libopenmpt 0.2.5705-beta15.
* Thu Jan 30 2020 tchvatal@suse.com
- Update to 0.4.11:
* The “date” metadata could contain a bogus date for some older IT files.
* Do not apply global volume ramping from initial global volume when seeking.
* MTM: Sample loop length was off by one.
* PSM: Sample loop length was off by one in most files.
* MOD: Fix initial instrument change with no note playing.
* Thu Oct 03 2019 9+suse@cirno.systems
- Update to version 0.4.9 bsc#1153102 CVE-2019-17113
* [Sec] libmodplug: C API: Limit the length of strings copied to
the output buffer of ModPlug_InstrumentName() and
ModPlug_SampleName() to 32 bytes (including terminating null)
as is done by original libmodplug. This avoids potential buffer
overflows in software relying on this limit instead of querying
the required buffer size beforehand. libopenmpt can return
strings longer than 32 bytes here beacuse the internal limit of
32 bytes applies to strings encoded in arbitrary character
encodings but the API returns them converted to UTF-8, which
can be longer. (reported by Antonio Morales Maldonado of Semmle
Security Research Team) (r12129)
* [Sec] libmodplug: C++ API: Do not return 0 in
CSoundFile::GetSampleName() and CSoundFile::GetInstrumentName()
when a null output pointer is provided. This behaviour differed
from libmodplug and made it impossible to determine the
required buffer size. (r12130)
* Tue Oct 01 2019 9+suse@cirno.systems
- Update to version 0.4.8:
* [Sec] Possible crash due to out-of-bounds read when playing an
OPL note with active filter in S3M or MPTM files (r12118).
- Update to version 0.4.7:
* J2B: Ignore notes with non-existing instrument
(fixes Ending.j2b)
* Sun Aug 11 2019 9+suse@cirno.systems
- Update to version 0.4.6:
* Detect IT files unpacked with early UNMO3 versions.
* Mon May 27 2019 9+suse@cirno.systems
- Update to version 0.4.5:
* [Sec] Possible crash during playback due out-of-bounds read in
XM and MT2 files
* Breaking out of a sustain loop through Note-Off sometimes
didn’t continue in the regular sample loop
* Seeking did not stop notes playing with XM Key Off (Kxx) effect
* Sun Apr 07 2019 9+suse@cirno.systems
- Update to version 0.4.4:
* [Bug] Channel VU meters were swapped.
* Startrekker: Clamp speed to 31 ticks per row.
* MTM: Ignore unused Exy commands on import.
Command E5x (Set Finetune) is now applied correctly.
* MOD: Sample swapping was always enabled since it has been
separated from the ProTracker 1/2 compatibility flag. Now it is
always enabled for Amiga-style modules and otherwise the old
heuristic is used again.
* Mon Feb 11 2019 9+suse@cirno.systems
- Update to version 0.4.3:
* [Sec] Possible crash due to null-pointer access when doing a
portamento from an OPL instrument to an empty instrument note
map slot.
* IT: Various fixes for note-off + instrument number in
Old Effects mode.
* MO3: Import IT row highlights as written by MO3 2.4.1.2 or
newer. Required for modules using modern tempo mode.
* Tue Jan 22 2019 9+suse@cirno.systems
- Update to version 0.4.2 bsc#1143582 CVE-2019-14382 bsc#1143584
CVE-2019-14383:
* [Sec] DSM: Assertion failure during file parsing with debug
STLs.
* [Sec] J2B: Assertion failure during file parsing with debug
STLs.
* S3M: Allow volume change of OPL instruments after Note Cut.
* Sun Jan 06 2019 9+suse@cirno.systems
- Update to version 0.4.1:
* [Bug] libmodplug: Public symbols of the C++ API had
visibility=hidden set on non-MSVC systems, which made them not
publicly accessible.
* MO3: Apply playback changes based on “ModPlug-made” header flag
- Drop libmodplug-no-exported-cpp-api-quickfix-v1.patch
* Tue Jan 01 2019 antoine.belvire@opensuse.org
- Add libmodplug-no-exported-cpp-api-quickfix-v1.patch: Add missing
CSoundFile compat API (bug #1180).
* Sun Dec 23 2018 9+suse@cirno.systems
- Update to version 0.4.0 bsc#1143581 CVE-2018-20860:
* [New] libopenmpt now includes emulation of the OPL chip and
thus plays OPL instruments in S3M, C67 and MPTM files.
OPL chip emulation volume can be changed with the new ctl
render.opl.volume_factor.
* [New] libopenmpt now supports CDFM / Composer 670 module files.
* [New] libopenmpt: New ctl play.at_end can be used to change
what happens when the song end is reached:
- “fadeout”: Fades the module out for a short while.
Subsequent reads after the fadeout will return 0 rendered
frames. This is the default and identical to the behaviour
in previous libopenmpt versions.
- “continue”: Returns 0 rendered frames when the song end is
reached. Subsequent reads will continue playing from the song
start or loop start. This can be used for custom loop logic,
such as loop auto-detection and longer fadeouts.
- “stop”: Returns 0 rendered frames when the song end is
reached. Subsequent reads will return 0 rendered frames.
* [New] Add new metadata fields "originaltype" and
"originaltype_long" which allow more clearly reflecting what
is going on with converted formats like MO3 and GDM.
* [Change] openmpt123: openmpt123 now rejects --output-type in
- -ui and --batch modes and also rejects --output in --render
mode. These combinations of options really made no sense and
were rather confusing.
* [Regression] Support for libmpg123 older than 1.14.0 has been
removed.
* [Regression] libmodplug: Support for emulating libmodplug
0.8.7 API/ABI has been removed.
* [Bug] xmp-openmpt: Sample rate and number of output channels
were not applied correctly when using per-file settings.
* [Bug] Internal mixer state was not initialized properly when
initially rendering in 44100kHz stereo format.
* [Bug] openmpt123: Prevent libsdl2 and libsdl from being enabled
at the same time because they conflict with each other.
* [Bug] libmodplug: Setting SNDMIX_NORESAMPLING in the C++ API
always resulted in linear interpolation instead of nearest
neighbour
* IT: In Compatible Gxx mode, allow sample changes next to a tone
portamento effect if a previous sample has already stopped
playing.
* IT: Fix broken volume envelopes with negative values as found
in breakdwn.it by Elysis.
* MOD: Slides and delayed notes are executed on every repetition
of a row with row delay (fixes “ode to protracker”).
* XM: If the sustain point of the panning envelope is reached
before key-off, it is never released.
* XM: Do not default recall volume / panning for delayed
instrument-less notes
* XM :E60 loop bug was not considered in song length calucation.
* S3M: Notes without instrument number use previous note’s sample
offset.
* Tighten M15 and MOD file rejection heuristics.
* J2B: Ignore frequency limits from file header.
Fixes Medivo.j2b, broken since libopenmpt-0.2.6401-beta17.
* STM: More accurate tempo calculation.
* STM: Better support for early format revisions (no such files
have been found in the wild, though).
* STM: Last character of sample name was missing.
* SFX: Work around bad conversions of the “Operation Stealth”
soundtrack by turning pattern breaks into note stops.
* IMF: Filter cutoff was upside down and the cutoff range was
too small.
* ParamEq plugin center frequency was not limited correctly.
* Keep track of active SFx macro during seeking.
* The “note cut” duplicate note action did not volume-ramp the
previously playing sample.
* A song starting with non-existing patterns could not be played.
* DSM: Support restart position and 16-bit samples.
* DTM: Import global volume.
* MOD: Support notes in octave 2, like in FastTracker 2
(fixes DOPE.MOD).
* Do not apply Amiga playback heuristics to MOD files that have
clearly been written with a PC tracker.
* MPTM: More logical release node behaviour.
* Subsong search is now less thorough. It could previously find
many subsongs that are technically correct (unplayed rows at
the beginning of patterns that have been jumped over due to
pattern breaks), but so far no real-world module that would
require such a thorough subsong detection was found. The old
mechanism caused way more false positives than intended with
real-world modules, though.
* Restrict the unpacked size of compressed DMF, IT, MDL and MO3
samples to avoid huge allocations with malformed small files.
* Mon Oct 22 2018 9+suse@cirno.systems
- Update to version 0.3.13:
* [Sec] Crash with malformed MED files.
* Transposed samples in AMF ASYLUM modules were not played
correctly.
* Notes triggered by libopenmpt_ext play_note could be played
with a panbrello effect if the same virtual channel was
previously used with panbrello.
* Clicks when stopping channels that didn’t end at zero volume.
* XM: Do not import non-standard commands N and M as channel
volume commands.
* Mon Sep 24 2018 9+suse@cirno.systems
- Update to version 0.3.12:
* [Bug] libmodplug: Setting SNDMIX_NORESAMPLING in the C++ API
always resulted in linear interpolation instead of nearest
neighbour.
* libopenmpt now compiles without warnings with GCC 8.
* Jump commands on the same row as the end of a pattern loop
covering the restart position of the module could cause the
module to loop even when looping was disabled.
* MO3: Reject overly long MP3 and Vorbis samples.
* play_note from the libopenmpt_ext interface sometimes silenced
the start of a triggered sample.
* Sat Jul 28 2018 9+suse@cirno.systems
- Update to version 0.3.11 bsc#1143578 CVE-2018-20861:
* [Sec] Crash with some malformed custom tunings in MPTM files
* Channels whose volume envelope was playing at volume 0 while
being moved to a NNA background channel were cut off completely
since libopenmpt 0.3.8.
* AMF (ASYLUM): Convert 7-bit panning to 8-bit panning for
playback
- Update to version 0.3.10:
* [Bug] Internal mixer state was not initialized properly when
initially rendering in 44100kHz stereo format.
* [Bug] AMF: Undefined behaviour in loader code could lead to
files playing silent.
* Switching between instruments with portamento did not update
the NNA settings for the new instrument.
* FAR: Properly import volume commands.
* [Sec] Possible write near address 0 in out-of-memory situations
when reading AMS files.
* [Bug] openmpt123: Fixed build failure in C++17 due to use of
removed feature std::random_shuffle.
* STM: Having both Bxx and Cxx commands in a pattern imported the
Bxx command incorrectly.
* STM: Last character of sample name was missing.
* Speed up reading of truncated ULT files.
* ULT: Portamento import was sometimes broken.
* The resonant filter was sometimes unstable when combining
low-volume samples, low cutoff and high mixing rates.
* Mon May 28 2018 tchvatal@suse.com
- Up to 0.3.9:
* [Sec] Possible write near address 0 in out-of-memory situations
when reading AMS files (bsc#1095644 CVE-2018-11710)
* [Bug] openmpt123: Fixed build failure in C++17 due to use of
removed feature std::random_shuffle.
* STM: Having both Bxx and Cxx commands in a pattern imported
the Bxx command incorrectly.
* STM: Last character of sample name was missing.
* Speed up reading of truncated ULT files.
* ULT: Portamento import was sometimes broken.
* The resonant filter was sometimes unstable when combining
low-volume samples, low cutoff and high mixing rates.
* Thu Apr 19 2018 9+suse@cirno.systems
- Update to 0.3.8
* [Sec] Possible out-of-bounds memory read with IT / ITP / MO3
files containing pattern loops (CVE-2018-10017, bsc#1089080)
* Keep track of active SFx macro during seeking.
* The "note cut" duplicate note action did not volume-ramp the
previously playing sample.
* A song starting with non-existing patterns could not be played.
* DSM: Support restart position and 16-bit samples.
* DTM: Import global volume.
* Wed Mar 21 2018 tchvatal@suse.com
- Version update to 0.3.7:
* Various speedup improvements and features all around
* Fuzzying fixes
* Fri Jul 14 2017 tchvatal@suse.com
- Version update to 0.2.8461-beta26 bsc#1048666 CVE-2017-11311:
* various small fixes and seciruity tweaks
* Mon Jun 19 2017 zaitor@opensuse.org
- Add libopenmpt0 and libopenmpt_modplug1 to baselibs.conf too.
* Wed Jun 14 2017 olaf@aepfle.de
- baselibs.conf for libmodplug.so.1
* Mon May 22 2017 tchvatal@suse.com
- Add patch fixing issue bsc#1040149 wrong includedir propagation:
* libmodpulg-pcfile.patch
* Mon May 22 2017 tchvatal@suse.com
- Version update to 0.2.8043-beta23
* foo_openmpt: Interpolation filter and volume ramping settings were
confused in previous versions. This version resets both to the defaults.
- Make mpg123 on by default
* Mon Mar 27 2017 tchvatal@suse.com
- Update to 0.2.7774-beta22
- Make mpg123 conditional and disabled for now by default
- Fix the Factory build with the new rpm
* Sun Feb 19 2017 jengelh@inai.de
- Update summaries and descriptions.
- Enable the SDL2 driver as an option, as the portaudio driver
appears to hang with ALSA (and not everyone runs Pulseaudio).
* Sun Feb 19 2017 tchvatal@suse.com
- Initial package containing libopenmod more updated secure alternative
bsc#1022032
/usr/lib/debug /usr/lib/debug/.build-id /usr/lib/debug/.build-id/e9 /usr/lib/debug/.build-id/e9/a8e6a79a4a44c404d150efa39d364846d98441 /usr/lib/debug/.build-id/e9/a8e6a79a4a44c404d150efa39d364846d98441.debug /usr/lib/debug/usr /usr/lib/debug/usr/lib64 /usr/lib/debug/usr/lib64/libopenmpt.so.0.3.3.debug
Generated by rpm2html 1.8.1
Fabrice Bellet, Wed Jul 17 23:25:02 2024