lzip-debugsource-1.23-slfo.1.1.3 RPM for s390x

From OpenSuSE Leap 16.0 for s390x

This package provides debug sources for package lzip.
Debug sources are useful when developing applications that use this
package or when debugging this package.

Provides

• lzip-debugsource
• lzip-debugsource(s390-64)

Requires

• rpmlib(CompressedFileNames) <= 3.0.4-1
• rpmlib(FileDigests) <= 4.6.0-1
• rpmlib(PayloadFilesHavePrefix) <= 4.0-1
• rpmlib(PayloadIsZstd) <= 5.4.18-1

License

GPL-2.0-or-later

Changelog

* Sun Feb 13 2022 jengelh@inai.de
  - Update to release 1.23
    * Decompression time has been reduced by 5-12% depending on the
      file.
    * In case of error in a numerical argument to a command line
      option, lzip now shows the name of the option and the range
      of valid values.
* Tue Jan 19 2021 dmueller@suse.com
  - update to 1.22:
    * Lzip now reports an error if a file name is empty (lzip -t "").
    * Option '-o, --output' now behaves like '-c, --stdout', but
      sending the output unconditionally to a file instead of to
      standard output.
    * Lzip now does not even open the output file if the input file
      is a terminal.
    * Lzip can now be built, tested, and installed on systems
      lacking a 'make' program. (Feature suggested by Mohammad
      Akhlaghi).
    * The words 'decompressed' and 'compressed' have been replaced
      with the shorter 'out' and 'in' in the verbose output when
      decompressing or testing.
    * Option '--list' now reports corruption or truncation of the
      last header in a multimenber file specifically instead of
      showing the generic message "Last member in input file is
      truncated or corrupt."
    * The commands needed to extract files from a tar.lz archive
      have been documented in the manual, in the output of '--help',
      and in the man page.
    * Plzip and tarlz are mentioned in the manual as alternatives for
      multiprocessors.
    * Several fixes and improvements have been made to the manual.
* Sun Jan 13 2019 seanlew@opensuse.org
  - Update to new upstream release 1.21
    * Errors are now also checked when closing the input file
    * The descritions in the man pages are improved
    * Config script now accepts appending CXXFLAGS options
* Fri Dec 14 2018 jengelh@inai.de
  - Update to new upstream release 1.21~rc1
    * Detection of forbidden combinations of characters in trailing
      data has been improved.
* Mon Mar 05 2018 jengelh@inai.de
  - Update to new upstream release 1.20
    * The option "--loose-trailing" has been added.
    * The test used by clzip to discriminate trailing data from a
      corrupt header in multimember or concatenated files has been
      improved to a Hamming distance of 3.
    * The "-S" option now keeps input files unchanged.
* Tue Jan 23 2018 avindra@opensuse.org
  - Update to version 1.19
    * The option '-l, --list' has been ported from lziprecover.
    * Don't allow mixing different operations (-d, -l or -t).
    * Compression time of option '-0' has been slightly reduced.
    * Decompression time has been reduced by 2%.
    * main.cc: Continue testing if any input file is a terminal.
    * main.cc: Show trailing data in both hexadecimal and ASCII.
    * encoder.cc (Matchfinder_base): Verify size passed to new.
    * file_index.cc: Improve detection of bad dict and trailing data.
    * lzip.h: Unified messages for bad magic, trailing data, etc.
  - switch to https in source urls
* Sun Jun 05 2016 mpluskal@suse.com
  - Update to version 1.18:
    * main.cc: Added new option '-a, --trailing-error'.
    * Decompression time has been reduced by 2%.
    * decoder.cc (verify_trailer): Removed test of final code.
    * main.cc (main): Delete '--output' file if infd is a terminal.
    * main.cc (main): Don't use stdin more than once.
    * Removed decompression support for version 0 files.
    * lzip.texi: Added chapter 'Trailing data'.
    * configure: Avoid warning on some shells when testing for g++.
    * Makefile.in: Detect the existence of install-info.
    * testsuite/check.sh: A POSIX shell is required to run the tests.
    * testsuite/check.sh: Don't check error messages.
* Thu Aug 06 2015 jengelh@inai.de
  - Update to new upstream release 1.17
    * The compression code has been reorganized to ease the porting of
    the fast encoder to clzip and lzlib.
    * The new chapter "Quality assurance" has been added to the manual.
* Wed Oct 01 2014 jengelh@inai.de
  - Update to new upstream release 1.16
    * Compression ratio of option -9 has been slightly increased.
    * Compression time has been reduced by 4%.
    * `lzip -0` is now comparable in compression speed and ratio to
    `gzip -6` (gzip's default compression level).
    * Copying of file dates, permissions, and ownership now behaves
    like `cp -p`. (If the user ID or the group ID cannot be
    duplicated, the file permission bits S_ISUID and S_ISGID are
    cleared).
    * The license has been changed to GPL version 2 or later.
* Fri Oct 04 2013 jengelh@inai.de
  - Update to new upstream release 1.15
    * This release shows the progress of compression at verbosity
    level 2 (-vv).
    * The chapter "Stream format" and the appendix "Reference source
    code" have been added to the manual.
* Mon Apr 01 2013 pascal.bleser@opensuse.org
  - update to 1.14:
    * Multi-step trials have been implemented
    * Compression ratio has been slightly increased
    * Compression time has been reduced by 5%
    * Decompression time has been reduced by 12%
* Tue Sep 04 2012 cfarrell@suse.com
  - license update: GPL-3.0+
    Use SPDX format (http://www.spdx.org/licenses)
* Sun Mar 18 2012 pascal.bleser@opensuse.org
  - update to 1.13:
    * lziprecover has been moved to its own package
    * inability to change output file attributes has been downgraded from error
      to warning
    * compression time of option "-0" has been reduced by 2%
    * a reorganization of the compression code has been made
    * a small change has been made in the "--help" output and man page
    * quote characters in messages have been changed as advised by GNU Coding
      Standards
* Fri May 13 2011 pascal.bleser@opensuse.org
  - update to 1.12:
    * the option "-F, --recompress", which forces recompression of files whose
      name already has the ".lz" or ".tlz" suffix, has been added
    * for large values of "--match-length", the compression ratio has been
      slightly increased, and compression time has been reduced by up to 6%
    * the compression time of the option "-0" has been reduced by 2%
    * this release will print only one status line for each multi-member file
      when only one "-v" is specified
    * it will print up to 6 bytes of trailing garbage when "-vvvv" is specified
    * it does not show the message "and `--stdout' was not specified" for file
      types that can't be read (directories, etc)
* Mon Sep 27 2010 pascal.bleser@opensuse.org
  - update to 1.11:
    * match length limit set by options -1 to -8 has been reduced to extend the
      range of use towards gzip; lower numbers now compress less but faster
    * also, a "-0" option as fast as "gzip -9" has been added
    * the compression of option -9 has been slightly increased
    * the "--merge" option, which tries to produce a correct file by merging the
      good parts of two or more damaged copies, has been added to lziprecover:
      for large files with small errors, the probability of producing a correct
      file approaches 100 percent
    * lziprecover is now able to repair any 1-byte error in the lzma stream of
      damaged lzip files
* Sat Apr 10 2010 pascal.bleser@opensuse.org
  - update to 1.10:
    * a file specified with the "-o" option is now created with write permission
      for all if umask allows it, and it is deleted if lzip is interrupted by the
      user
    * the dictionary size for the options -2, -3, -4, and -8 has been changed to
      improve linearity of compressed sizes
* Tue Jan 19 2010 pascal.bleser@opensuse.org
  - update to 1.9:
    * Lzip now returns at least 1 if closing stdout fails
    * lintian warnings in Debian about man pages have been fixed
    * the "COPYING" file is no longer used as data for testing
* Fri Sep 04 2009 pascal.bleser@opensuse.org
  - update to 1.8:
    * compression time has been reduced by 4%
  - changes from 1.7:
    * lzdiff and lzgrep have been renamed to zdiff and zgrep and moved to the new
      package zutils (http://freshmeat.net/projects/zutils)
    * compilation warnings on systems where uint32_t... != unsigned int have been
      fixed.
* Tue Jun 23 2009 pascal.bleser@opensuse.org
  - update to 1.6:
    * decompression time has been reduced by 17%
    * decompression support for the "Sync Flush marker" from lzlib has been added
    * man pages for lzdiff, lzgrep, and lziprecover have been added to the
      distribution
    * memory use has been reduced to 9x if the input file is smaller than
      dictionary size limit
    * flush calls have been added to decompressor to allow partial recovery of
      the uncompressed data when decompressing a corrupt file
    * the dependence of "--test" on the existence of "/dev/null" has been removed
    * some "bashisms" have been removed from lzdiff and lzgrep
* Wed Apr 15 2009 pascal.bleser@opensuse.org
  - update to 1.5
* Mon Dec 22 2008 guru@unixtech.be
  - update to 1.3
* Tue Nov 18 2008 guru@unixtech.be
  - update to 1.1:
    * the short name of the option "--dictionary-size" has been changed to "-s"
    * the short name of the option "--match-length" has been changed to "-m"
    * some user messages have been improved
* Tue Oct 14 2008 guru@unixtech.be
  - update to 1.0:
    * small changes have been made to the documentation and user messages
* Wed Oct 01 2008 guru@unixtech.be
  - update to 0.5:
    * decompression speed has been improved by 1%
* Wed Sep 24 2008 guru@unixtech.be
  - update to 0.4:
    * this release regains the compression ratio of version 0.2 with a speed
      that is a 5% faster
    * a compilation problem on systems where "size_t" is different from
      "unsigned int" has been fixed
* Mon Sep 15 2008 guru@unixtech.be
  - new package

Files

/usr/src/debug/lzip-1.23
/usr/src/debug/lzip-1.23/arg_parser.cc
/usr/src/debug/lzip-1.23/arg_parser.h
/usr/src/debug/lzip-1.23/build
/usr/src/debug/lzip-1.23/decoder.cc
/usr/src/debug/lzip-1.23/decoder.h
/usr/src/debug/lzip-1.23/encoder.cc
/usr/src/debug/lzip-1.23/encoder.h
/usr/src/debug/lzip-1.23/encoder_base.cc
/usr/src/debug/lzip-1.23/encoder_base.h
/usr/src/debug/lzip-1.23/fast_encoder.cc
/usr/src/debug/lzip-1.23/fast_encoder.h
/usr/src/debug/lzip-1.23/list.cc
/usr/src/debug/lzip-1.23/lzip.h
/usr/src/debug/lzip-1.23/lzip_index.cc
/usr/src/debug/lzip-1.23/lzip_index.h
/usr/src/debug/lzip-1.23/main.cc

Generated by rpm2html 1.8.1

Fabrice Bellet, Thu Jul 18 00:41:20 2024