| Index | index by Group | index by Distribution | index by Vendor | index by creation date | index by Name | Mirrors | Help | Search |
| Name: drbd-utils | Distribution: SUSE Linux Framework One |
| Version: 9.25.0 | Vendor: SUSE LLC <https://www.suse.com/> |
| Release: slfo.1.1.1 | Build date: Wed Aug 28 11:07:34 2024 |
| Group: Productivity/Clustering/HA | Build host: h01-ch5a |
| Size: 1799270 | Source RPM: drbd-utils-9.25.0-slfo.1.1.1.src.rpm |
| Packager: https://www.suse.com/ | |
| Url: https://linbit.com/linbit-software-download-page-for-linstor-and-drbd-linux-driver/ | |
| Summary: Distributed Replicated Block Device | |
Drbd is a distributed replicated block device. It mirrors a block device over the network to another machine. Think of it as networked raid 1. It is a building block for setting up clusters.
GPL-2.0-or-later
* Mon Mar 18 2024 glass.su@suse.com
- drbd failover timeout because of "fence-peer helper broken" (bsc#1219263)
* bsc-1219263_crm-fence-peer.9.sh-fix-parsing-in_ccm-crmd-fields-o.patch
* bsc-1219263_crm-fence-peer.9.sh-use-join-of-node_state-to-judge-.patch
* Mon Feb 26 2024 dimstar@opensuse.org
- Use %autosetup macro. Allows to eliminate the usage of deprecated
PatchN.
* Mon Aug 28 2023 heming.zhao@suse.com
- Update to 9.25.0 (jsc#PED-6362)
* drbdsetup,v9,show: fix meta disk format for json
* drbdmeta: {hex,}dump superblock
* drbdmon: major rewrite
* build: gcc v12 cleanups
* misc: put locks into separate dir
* selinux: add fowner fsetsid, they dropped a global noaudit rule
* v9: Support user-defined block-size
* doc,v9: improvements all over the place
* drbdadm,v9: implement drbdadm role <res:peer>
* drbdadm,v9: pass --verbose/--statistics to drbdsetup status
* drbd{adm,meta}: add repair-md subcommand
* drbdadm,v9,resync-after: fix too strict check
* drbdadm,v9,floating: fixup fake uname for 9.2.x strict_names=1
* drbdadm,v9,parser: fixup globs, also rm GNU libc specific extensions
* drbdadm,v9,parser: allow via outside-address for NATed peers
* parser,v9: deprecate named connections
* drbd-selinux: add sub package, minor packaging/spec changes
* drbdadm: allow files from expanded glob to vanish
* drbdadm,v9: fix potential segfault in postparse
* drbdadm,v9: fix sh-ip when set on connection/path
* drbdmeta: fix apply-al for bitmap sizes > 4GiB
* drbd-service-shim.sh: add secondary --force
* ocf: fix for dropped --peer option
* drbdsetup,v9: show susupend reason in json output
* drbdsetup,v9: add secondary --force
* drbdsetup,v9: fix *susp_str() for events2 diff mode
* drdbdadm,v9: fix sh-resource
* drdbdadm,v9: rm --peer=connect_to_host
* ocf: deal with situation where PM node name and actual node name do not
match
* notify.sh: deal with unset DRBD_PEER env variable
* crm-fence-peer: fix timeout with Pacemaker 2.0.5
* drbdmeta: don't wait for confirmation if not a TTY
* drbdadm,v9: Pass '--force' to certain drbdmeta commands
* drbdmeta: do init in chunks; allow different methods
* build: various minor fixes (udev detection, POSIX,
compiler flags, allow doc building with asciidoctor,...)
* drbd.ocf: fix type (relevant for certain pcs versions)
* crm-fence-peer: fix timeout with Pacemaker 2.1
* v9,proxy: allow multiple sharing a proxy node
* v9,drbdsetup: quote resource name in "show"
* build: allow building for RHEL9.0, minor cleanups
* reactor/systemd: allow proper actions (e.g., reboot) if
demotion fails.
- introduce new systemd service:
drbd-demote-or-escalate@.service
- remove v83 v84 binaries (incompatible with kmp)
- drop patches which are already included in latest code:
- 0001-crm-fence-peer-fix-timeout-with-Pacemaker-2.1-milli-.patch
- 0002-crm-fence-peer-fix-timeout-with-Pacemaker-2.0.5-mill.patch
- add upstream patch:
+ 0001-drbdadm-v9-do-not-segfault-when-re-configuring-proxy.patch
+ 0002-user-drbrdmon-add-missing-stdint.h-includes.patch
+ 0003-Introduce-default_types.h-header.patch
- change patch name:
- 0001-Disable-quorum-in-default-configuration-bsc-1032142.patch
+ bsc-1032142_Disable-quorum-in-default-configuration.patch
- rebase patch:
+ pie-fix.patch
+ rpmlint-build-error.patch
* Wed May 31 2023 fcrozat@suse.com
- Update url and remove download url for tarball, not valid anymore.
* Mon Mar 27 2023 nicholas.yang@suse.com
- crm-fence-peer incompatible with Pacemaker 2.1 and needs backports (bsc#1209783)
* 0001-crm-fence-peer-fix-timeout-with-Pacemaker-2.1-milli-.patch
* 0002-crm-fence-peer-fix-timeout-with-Pacemaker-2.0.5-mill.patch
* Thu Mar 23 2023 nicholas.yang@suse.com
- bsc#1208922: fails to replace directory /lib/drbd with symlink
* modify drbd-utils.spec to manipulate the symlink in %postun and %posttrans script
* Fri Mar 10 2023 nicholas.yang@suse.com
- bsc#1208922: fails to replace directory /lib/drbd with symlink
* modify drbd-utils.spec to rename it in pretrans script
* Tue Jan 03 2023 heming.zhao@suse.com
- drbd.service fails to load - incorrect path to executable (bsc#1206754)
* use %suse_version to replace %UsrMerge
* modify drbd-utils.spec for create symbolic folder "/lib/drbd"
* Fri Oct 14 2022 zzhou@suse.com
- bsc#1204276 remove crm-fence-peer.sh for drbd8 to avoid confusion with v9
* Wed Sep 21 2022 zzhou@suse.com
- drbd-utils.spec force _localstatedir to use /var/lib in runtime (bsc#1203220)
* Fri Sep 16 2022 zzhou@suse.com
- restore drbd scripts back to /usr/lib/drbd from /lib/drbd (bsc#1203220)
Update drbd-utils.spec
- fix drbd-bash-completion
Update rpmlint-build-error.patch
* Mon Oct 11 2021 nwang@suse.com
- Update to 9.19.0
* v9,events2: show changes of peer-client
* v9: rr-conflict strategy auto-discard for protocol A
* windrbd: various fixes including setting the systemd root
* containers: switch to UBI8
* v9,wait-*: fix segfault
- bsc#1191058, active UsrMerge to install in /usr
Add patch usrmerge_move_lib_to_prefix_lib.patch
- Remove patch fix-libdir-in-Makefile.patch
Remove patch systemd-drbd-service-needs-network-online.patch (included)
- Add drbd-utils.rpmlintrc for Error missing-call-to-setgroups-before-setuid
- Add rpmlint-build-error.patch to fix rpmbuild build errors
* Fri Sep 17 2021 nwang@suse.com
- bsc#1190591, fail to start due to lack of /usr/var/run/drbd
* Wed Jul 21 2021 nwang@suse.com
- Update to 9.18.0 (bsc#1189363)
* build: remove rpm related targets
* drbdsetup,v84: fix minor compile warnings
* systemd: resource specific activation
* systemd: drbd-reactor promoter templates
* doc: fix maximum ping timeout
* doc: add man pages for the systemd templates
* drbdadm,v9: fix dstate for diskless volumes
* build/release: use lbvers.py
* drbd-attr: don't leak fd to drbdsetup
* doc: various fixes and additions
* drbdsetup,events2,v9: add backing_device
* build,Debian: rm dh-systemd dependency
* drbdsetup,events2,v9: fix --poll regression
* drbdmeta: fix bug with ALs with small final extents
* build,Debian: rm mail recommends
* drbdsetup,events2,v9: allow --poll without --now
* drbdsetup,invalidate: allow bitmap based resync after verify
* drbdadm,sh-ll-dev: change output to "none" if diskless
* drbd-attr/may_promote: fixes from 9.15.1
* drbdadm,v9: allow set-gi in single node clusters
* drbsetup,events2,v9: diff(erential) output
* drbsetup,events2,v9: add --full output
* v9: allow resource rename, also in drbdmon
* drbdadm,v9: allow c-max-rate to be disabled
* New drbd-attr Pacemaker RA
* events2: handle mixed initial state and multicast events
* events2: fix regression to always print resync done
- Add patch systemd-drbd-service-needs-network-online.patch
* Wed Apr 21 2021 matthias.gerstner@suse.com
- add pie-fix.patch: explicitly pass -pie linker flag when building drbdmon.
The Makefile explicitly passes -fPIC, thereby breaking our gcc-PIE profile.
In addition the Makefile also ignores CXXFLAGS and LDFLAGS passed via the
environment. Therefore fix it with this patch. This makes drbdmon a PIE
binary (bsc#1184122, bsc#1185132).
* Tue Nov 17 2020 lnussel@suse.de
- prepare usrmerge (boo#1029961)
* Mon Oct 12 2020 ohering@suse.de
- Move block-drbd back to /etc/xen/scripts (bsc#1177531)
The change in xen.spec was reverted, but the revert was not applied
to this pkg
* Fri Sep 11 2020 nwang@suse.com
- bsc#1176436, update to 9.14.0
* pacemaker: various fixes/improvements for PM >=1.1.15
including the 2 series; crm-fence-peer.9.sh
* systemd dependency for drbd-proxy
* containers: multi-arch support, especially for s390x
* multipathd: blacklist drbd
* drbdsetup: code refactoring and improvements,
as well as tests for events2!
add "may_promote", "promotion_score". See man page.
* build: compile fixes for gcc-10; CI pipeline
* handlers: add "disconnected"
- Remove patch crm-fence-peer-pacemaker2-issue2.patch (included)
Remove patch link-error-setup_option.patch (included)
* Fri Sep 04 2020 nwang@suse.com
- bsc#1176065, fail to get master id from cib xml in fence handler
Add patch crm-fence-peer-pacemaker2-issue2.patch
* Mon Jun 08 2020 nwang@suse.com
- bsc#1172641, fix the link error of setup_option.
Add patch link-error-setup_option.patch
* Sat May 09 2020 nwang@suse.com
- bsc#1171419, Update to 9.13.0
* crm-fence-peer{,.9}.sh: detect Pacemaker 2 promotable clones
* submodules: switch to https, which makes it easier to clone
if you are behind some weird company firewalls.
* drbd.service: start pacemaker before drbd-proxy
* windrbd: various new commands including create-resource-from-url,
set-syslog-ip, scan-partitions-for-minor, install-bus-device,
remove-bus-device
- Remove patch crm-fence-peer-pacemaker2.patch
* Tue Mar 10 2020 nwang@suse.com
- bsc#1166200 ,fix crm-fence-peer regex issue with pacemaker 2.
- Add patch crm-fence-peer-pacemaker2.patch
* Tue Feb 25 2020 nwang@suse.com
- Update to 9.12.0
* drbd.ocf: new wrc_timeout param, fail on attach failure,
remove_master_score_if_peer_primary param,
fail_promote_early_if_peer_primary param, improved helper logging
no error if wait-connect fails
* drbdadm,v9: fix dumping meta-disk in corner case
* crm-fence-peer.9.sh: fix Pacemaker 2 compat
* drbdsetup,v9: fixes for various json output corner cases
* drbdsetup,all: prepare for netlink changes (linux v5.2+)
* drbdadm,v9: fix a check for setting up connections multiple times
* init: setup file backed loop devices (mapping from LINSTOR)
* rr-conflict: add retry-connect option (>=drbd 9.0.20)
* drbdmon: 256/16 colors; events2 handler improvements
* drbdsetup,v9: new flag: force-resync (>=drbd 9.0.21)
- Remove netlink-prepare-for-kernel-v5.2.patch
Remove netlink-Add-NLA_F_NESTED-flag-to-nested-attribute.patch
Remove cibadmin-return-code-convert.patch in 144c8cc1d
* Mon Feb 03 2020 dimstar@opensuse.org
- BuildRequire pkgconfig(udev) instead of udev: allow OBS to
shortcut through the -mini flavors.
* Thu Oct 17 2019 rbrown@suse.com
- Remove obsolete Groups tag (fate#326485)
* Fri Sep 20 2019 nwang@suse.com
- bsc#1145296, fix the wrong return code with cib_apply_diff
Add patch cibadmin-return-code-convert.patch
* Fri Sep 06 2019 nwang@suse.com
- Support Kernel 5.2, bsc#1149945 and bsc#1144702
- Add patch netlink-prepare-for-kernel-v5.2.patch
Add patch netlink-Add-NLA_F_NESTED-flag-to-nested-attribute.patch
* Fri Sep 06 2019 nwang@suse.com
- Update to 9.10.0
* drbdmon: limit desplay lenght, minor fixes
* drbdsetup,v9: avoid underflow when resync regresses
* drbdmeta,v9: allow huge (~1PB volumes)
* drbdsetup,v9: add allow-remote-read flag(9.0.19)
* docker: switch to UBI images
* doc: update JA doc
* Thu Sep 05 2019 ohering@suse.de
- In our effort to make /etc fully admin controlled, move /etc/xen/scripts
to libexec/xen/scripts
* Tue Jun 11 2019 dimstar@opensuse.org
- BuildRequire pkgconfig(systemd) instead of systemd: allow OBS to
shortcut the build queues by allowing usage of systemd-mini
* Tue May 28 2019 nwang@suse.com
- Update to 9.9.0
* drbdadm,v9: do not ignore stacked/upper implicit paths.
* docker: provide initial integration.
* doc,v9: document transport keyword
* drbdmeta,v9: support for PMEM activity log format
* drbdadm: allow faking of drbdsetup show output
* drbdmeta,v9: fix forget-peer
* Thu Jan 17 2019 nwang@suse.com
- Update to 9.8.0
* i18n: use propper po files
* v9,stacked: allow node-id in stacked section
but one should not use stacked with v9 anyways
* dry run: remove trailing white space
This eases test integration.
Mentioned here because strictly speaking output changed.
* regression tests: if at ./configure time "clitest" is detected,
one can run tests via "make test". Target is a noop otherwise.
* drbdsetup,v9: fix wait-for (same patch as in 9.7.1)
* doc,v9: require-drbd-module-version-*, events2 --now --poll
* drbdadm,v9: allow stacked-on-top-of sections without address
* drbdadm,v9: bring up only the correct paths in multi-site scenaios.
* drbdadm,v9: fix parser segfault if node-id is missing.
* tests: require that they pass on release.
* drbdsetup,v9: fix key collision in show --json.
- bsc#1121794, use drbd9 man pages.
* Wed Dec 05 2018 nwang@suse.com
- Update to 9.7.0
* drbdadm,v9,v84: fix resync-after
* drbd.ocf: connect_only_after_promote, require kernel version
* drbdmon: display resync progress
* parser,v9: require-drbd-module-version
* windrbd: add WinDRBD support
* Tue Oct 30 2018 nwang@suse.com
- bsc#1115606. Update to new upstream release 9.6.0
* usage-count: also count notty users if possible.
* drbd-overview: remove it, we have drbdtop/drbdmon. saves all the Perl deps.
* drbdmon: update frequency limiting, debug log for drbdevents, use
altbuffer,...
* drbdsetup show: on 9 allow json output.
mainly used in our CI, don't expect a stable field names yet.
* drbdsetup satus: on 9 fix json output to not include NaN/Infinity
* allow higher resync rates: first customers hit a limit. this requires an
updated kernel module as well (e.g., 9.0.16)
* init: fix some 8-only leftovers (sh-b-pri), sanitize the retry logic
* doc: document various 9 features that got forgotten (e.g., quorum-lost)
* build: various small fixes that popped up while playing with meson
- Remove patch: skip_sh-b-pri_in_v9.patch fix in ace704aac
* Mon Jul 23 2018 nwang@suse.com
- Update to 9.5.0
* drbdmon: allow to start in problems view (--problems)
* drbdadm,v9: fix always failing stacked handlers from kernel
* drbdadm,v9: adjust now hands over the information that a
diskfull->diskless change was intentional.
* drbdadm,v9: adjust verifies now IPs
- Remove patch: fix_call_khelper_with_stack.patch in 60ec9fa68
* Thu May 10 2018 nwang@suse.com
- Update to 9.4.0
* drbdmeta: don't exit with negative return codes
* usage counts: only register if we know driver version
* drbdsetup,v9: expose detailed verify/resync statistics
* drbdsetup,v9,json: saner types for client/peer-client/quorum
on --json
* drbdsetup,v9: expose client/peer-client in status if !isatty()
- Including fix for SLE12SP3:
bsc#1064402, remove hardcoded local5 of logfacility
bsc#1037109, drbdmeta does not propagate full bitmap
* Sun Apr 08 2018 nwang@suse.com
- bsc#1090167, Update to 9.3.1
* update to Japanese man pages
* fixes for stacking in drbd-9.0
* fixes for proxy support in drbd-9.0
* fix adjusting --bitmap=no peer to diskfull
* VCS: typos and fixes for stacked resources
- Remove upstream patch Fix-no-bitmap-allocate-for-stacked-res.patch
- Remove upstream patch Support-pass-force-to-dump-md.patch
- Remove patch fix-segfault-up-stacked-resource.patch with
upstream fix 74b1cbb274
- drbdadm v84: fixup for disable-write-same
- Fix IPv4 & IPv6 address comparisons for 'drbdadm adjust'
* Mon Feb 05 2018 nwang@suse.com
- bsc#1077176, pass the string to backend.
- bsc#1058770, fix kernel trace while starting
sync stacked drbd
- Add patch Fix-no-bitmap-allocate-for-stacked-res.patch
- Add patch Support-pass-force-to-dump-md.patch
* Mon Jan 22 2018 nwang@suse.com
- bsc#1076936, from bwiedemann@suse.com.
Reproducible builds support merged in upstream, but
the changes in spec is lost.
* Wed Dec 06 2017 nwang@suse.com
- bsc#1074169, Update to 9.2.0
* Japanese man pages
* initial vertias cluster agent support
* quorum integration (including agents)
* improve drbd9 (mesh)/drbd-proxy integration
* pull fixups from 9.1.1 branch
* switch to github
* drbdmon: page naviagation
* debian: add mount as dependency
* Mon Oct 16 2017 nwang@suse.com
- bsc#1061145, fencing is moved from disk secion to net
Add move_fencing_from_disk_to_net_in_example.patch
- bsc#1061147, skip running drbdadm sh-b-pri in drbd9
Add skip_sh-b-pri_in_v9.patch
* Fri Sep 01 2017 nwang@suse.com
- Update to 9.1.0
* allow events2 --now polling
* fix ambiguous inheritance for peer-device-options
* fixup fallback path for BLKZEROOUT for older kernels
* fix v9 proxy support
* modernized XEN scripts
* reproducible builds support
* create-md --force for v8.4 (for compat to v9)
* fix cstate output
* resize: give resize more time (same as attach)
* drbdmon: peer-device status, version info, node name
* "drbdadm status" for v8.4
* set peer-device-options only once
- Remove Update-block-drbd-script-to-support-xen.patch
* Fri Aug 25 2017 nwang@suse.com
- fate#323392, enable drbdmon which imported in 8.9.10
* Fri Aug 11 2017 nwang@suse.com
- bsc#1052352, support block drbd for legacy format.
- Add Update-block-drbd-script-to-support-xen.patch
* Tue Jul 25 2017 nwang@suse.com
- bsc#1048671, Fix handler called from kernel always invalid
for stacking resource
- Add fix_call_khelper_with_stack.patch
* Wed Jun 07 2017 nwang@suse.com
- Update to v9.0.0
* drbd udev: fix inconsistent inheritance of implicit volumes
* Fix regressions of the out-of-the-box DRBD 8.4 experience
* DrbdMon: can now focus on "problem" resources
* v9: support new option on_no_quorum
* drbdadm: fix segfaults, improve error reporting
* adjust: fix deleting unrelated peer(s) on "adjust resource:specific-peer"
* drbdmeta create-md/convert: fix check for existing external meta-data
- Merged into upstream, remove Pass-md_index-information-to-detect_md.patch
* Thu Apr 27 2017 nwang@suse.com
- bsc#1032074, fix Inconsistent metadata after upgrade
- Add Pass-md_index-information-to-detect_md.patch
* will be merged into upstream in v8.9.12
* Tue Apr 04 2017 kgronlund@suse.com
- Update to v8.9.11
* No source changes from v8.9.11rc1
* Tue Apr 04 2017 kgronlund@suse.com
- Disable quorum in default configuration (bsc#1032142)
- Add 0001-Disable-quorum-in-default-configuration-bsc-1032142.patch
* Fri Mar 24 2017 nwang@suse.com
- Update to v8.9.11rc1
- OCF resource agent and crm-fence-peer for drbd9
introduce quorum support
JSON output fixes
set bitmap to 0 on metadata creation
- Remove patch support-drbd9-ra.patch
Remove patch initialize-node-id-when-create-md.patch
- Corresponding user space change of bsc#1031299
* Wed Mar 22 2017 nwang@suse.com
- Update to v8.9.10 for drbd9.0.6 and drbdmanage
- new drbdmon tool
drbdadm parser got faster
send SIGKILL to childs if parent drbdadm dies
compat fixes for linux kernel
* Mon Feb 20 2017 kukuk@suse.de
- Remove obsolete Requires for pre/post install sections
* Tue Feb 14 2017 nwang@suse.com
- bsc#1025585, update to v8.9.8
- Remove patch zeroout-discard-devices.patch
Remove patch service-mod.patch
* Tue Dec 06 2016 nwang@suse.com
- bsc#1006105, initialize node id when creating md.
- Add patch initialize-node-id-when-create-md.patch
* Wed Aug 03 2016 nwang@suse.com
- bsc#990834, remove the warning with experimental.
- Add warning when using multiple nodes.
* Wed Jun 29 2016 nwang@suse.com
- bsc#986215, fix segfault of up a DRBD9 stacked resource.
- Add patch fix-segfault-up-stacked-resource.patch
* Wed Jun 29 2016 nwang@suse.com
- bsc#986784, fix DRBD9 stacked resource could not started by RA.
* Fri Apr 08 2016 lchiquitto@suse.de
- bsc#972886, add pkg-config as build requirement to ensure udev's
rules directory will be detected at build time
* Mon Mar 14 2016 nwang@suse.com
- fate#320495. Support ha resource agent of drbd9.
Add patch support-drbd9-ra.patch
* Mon Mar 07 2016 nwang@suse.com
- bsc#955177, fence when another node pacemaker shutdown.
add patch fence-after-pacemaker-down.patch
* Mon Mar 07 2016 nwang@suse.com
- Update to v8.9.6
* Call "drbdsetup resize" only as often as necessary on
"drbdadm resize"
* Disconnect connection first on single path deletion from connection
* Add unfence-peer handler
* Fix "drbdadm adjust" for proxy configurations
* Tue Feb 23 2016 nwang@suse.com
- bsc#967753. Fix different udev rules folder in Leap and openSUSE.
* Thu Dec 24 2015 nwang@suse.com
- Update to v8.9.5
* add support for new disk option
'rs-discard-granularity' (module v8.4.7)
* add support for new disk option
'discard-zeroes-if-aligned' (module v8.4.7)
* add support for v9 "path" commands
* doc improvements/corrections
* improvements to drbd ocf resource agent
and pacemaker "constraint based fencing"
(crm-fence-peer.sh)
* drbd-overview improvements
* Add an autoconf switch for building without man pages
* Fix compatibility with the musl C library
* Introduce the concept of paths within a connection to
the config file; add support for paths to drbdadm adjust
* Allow multiple connection-mesh statements within one resource
* Document peer-device-options on the drbd-9.0 man pages
* increase the lower boundary for al-extents from 7 to 67;
drbdadm clamps al-extents to 67 implicitly if you configures
something lower than 67
* Document the events2 command on the drbd-8.4 man page
* Fix environment variables for handlers
* Rewrite the parser for configure options; Reuse the data
structures describing drbdsetup options
* No longer try to set peer-device-options with the connect
or attach commands; Only do it with the up and attach commands
* Fixed issues with stderr messages might go into arbitrary FDs
* Allow recursive includes; drbdadm includes each config
file only once
* Fix parsing cut-off proxy sections
* When converting 8.4 to 9.0 meta-data produce meta-data the drbd9
kernel driver will accept
* Obey max-peers for all volumes when creating meta-data
* Do not re-register at usage.drbd.org when the module is not
loaded when drbdadm is invoked
* Tue Nov 03 2015 nwang@suse.com
- BSC#949045. Remove execute of drbd.service.
- Add patch service-mod.patch
* Wed Aug 19 2015 nwang@suse.com
- Fate#317940. Support zeroout/discard instead of zap-devices
- Add patch zeroout-discard-devices.patch
- Remove zap-devices-xml.patch and zap-devices.patch
* Thu Jul 23 2015 nwang@suse.com
- Add Patch zap-devices-xml.patch and zap-devices.patch
for user space entrance to zap-devices of new-current-uuid.
- Patch fix-libdir-in-Makefile.patch
* Fri Apr 17 2015 nwang@suse.com
- Upgrade to released v8.9.2 for Fate#317940
* change systemd unit file: basically just call the init script
* make some previously hardcoded timeouts configurable
* drbdadm: New command peer-device-options
* drbd 9: Move max_buffers to net_conf
* drbd 9: Log errors to syslog if stderr is not available
* init script: fixes for stacked resources
* fix regression corner cases in bitmap size calculation
* allow create-md to initialize peer-max-bio-size to 1M
* drbd 9: make transport selectable
* fix aggregating drbdsetup / drbdmeta exit statii
* some documentation fixes (content and build)
* added direct-connect command
* incompatible drbd-9 metadata format change. use: node_id as index for
peer_md instead of the bitmap_index
* drbdadm/meta/usage_cnt: ensure output is visible
* drbdsetup: fix arguments for all commands expecting a peer_device
* exit codes: redefine E_USAGE to 1 (not 3)
* some build changes
* init script: on start, first try to load the module
* drbdsetup events2: Improve how timestamps are assigned
* udev rules (symlinks in /dev/by-res and by-disk) got fixed
* Fixed upper limit for drbd-8.4 activity log entries
* many fixes to drbdadm adjust and proxy commands for drbd-9
* rhcs_fence: Do not invoke fence agents in parallel, rewrite in bash
* drbdsetup events2 is now also available in drbd-8.4 (backported from
drbd-9)
* reorganized the repository have common code for drbd-9, drbd-8.4
and drbd-8.3 only once
* Fix drbd.ocf for resources without volume 0
* Wed Feb 18 2015 rgoldwyn@suse.com
- Upgrade to v8.9.2rc2 with _service file for latest git
* Wed Dec 17 2014 lwang@suse.com
- modify spec to set %attr(700,root,root) to %{_sysconfdir}/xen explicitly
to avoid mismatch with xen-tools/xen-xend-tools.
* Fri Nov 21 2014 lwang@suse.com
- add to drbd-utils.spec
Obsoletes: drbd < 8.4.5
* Fri Nov 07 2014 lwang@suse.com
- Delete requires for drbd-kmp for drbd driver is built in kernel
since 8.4.5
* Sat Oct 11 2014 lwang@suse.com
- update to drbd-utils-8.9.1
- drbd-utils-8.9.1
* add DRBD systemd service
* new configuration options socket-check-timeout and csums-after-crash-only
* update xen block-drbd helper: allow for type "phy"
* update udev rules and move from /etc/ to /lib/
* fix various regressions/fallout from the kernel/userland package split,
re-add scripts drbddisk and drbdupper,
re-add "become-on-primary" feature to init script
* crm-fence-peer.sh: improve detection of "clean down"
* updated fencing scripts stonith_admin-fence-peer.sh and rhcs_fence
* improved "proxy" configuration section parsing
* added manpage for drbd-overview, minor review of man pages
* build: various changes in configure.ac, makefiles, debian/* and spec file
- Upstream version cs: 87039e4993dc682232ec6365900ace657e060c73
- Delete patch:
add_phy_to_block-drbd.diff: included in upstream latest version
* Fri Jul 11 2014 lwang@suse.com
- created drbd-utils-8.9.0 (drbd tools )
(since 8.4.5 drbd only includes kernel space source)
- drbd-utils-8.9.0
* Initial release of unified drbd-utils
* Supports drbd drivers 8.3, 8.4 and 9.0
* Ships with man page links defaulting to 8.4
* Fixed offline resizing in drbdmeta; A regression that causes
data loss, since meta-data was written with wrong offset.
The regression was introduced with 8.4.3
- Upstream version cs: 79677f478d5b0b9bf6ee23cd7f97bc7ca6b99929
- drbd-utils-8.9.0 not support congfigure device name any longer
del: fix-udev-for-drbd-start-timeout.patch
- modify drbd.rules by removing NAME and adding SYMLINK in case that
configuration has a device name diffrent from kernel node (bnc#878119)
add: fix-udev-for-drbd-start-timeout.patch
* Tue May 20 2014 lmb@suse.com
- Packages drbd-xen, drbd-utils, drbd-bash-completion, and
drbd-pacemaker were merged into drbd (bnc#878793)
* Mon Mar 31 2014 rgoldwyn@suse.com
- Add Module.supported and preamble (bnc#871132)
* Thu Mar 27 2014 xli@suse.com
- Update to 8.4.4.7
- fix potential BUG_ON in mempool_alloc for older kernels (<2.6.23)
- fix cornercase of resync finished detection
- fix drbd_ldev_destroy to run exactly once and in worker context
- fix spurious detach/disconnect: don't announce WRITE_SAME
- fix NULL pointer deref in blk_add_request_payload
(DISCARD/TRIM handling in sd)
- fix regression: potential NULL pointer dereference
- fix regression: potential list corruption
- fix regression: potential deadlock in adm functions (drbdsetup)
- fix regression: /sbin vs /usr/sbin in scripts
- fix race stopping the worker thread
- linux 3.13 compatibility
- improve adaptive resync controler
- reduce bitmap IO during resync
- allow write-ordering policy to be bumped up again
- trigger tcp_flush_pending_frames() for PING/PING_ACK
- new sysfs oldest_requests attribute (may be moved to debugfs)
- fix potential segfault in drbdadm adjust
- drbdsetup improvements: fix socket buffers; detect modprobe failure
- Upstream version cs: 3c1f46cb19993f98b22fdf7e18958c21ad75176d
* Tue Mar 04 2014 mlatimer@suse.com
- Handle drbd devices when presented as phy devices by xenstore with
libxl (bnc#865682)
* Mon Oct 14 2013 lmb@suse.com
- Update to official 8.4.4
- drbd: evaluate disk and network timeout on different requests
- drbd: Fix a hole in the challange-response connection authentication
- drbd: always implicitly close last epoch when idle
- drbd: add back some fairness to AL transactions
- drbd: keep max-bio size during detach/attach on disconnected primary
- drbd: fix a race between start_resync and send_and_submit
- drbd: fix deadlock in discard fallback code
- Build drbd KMPs.
* Thu Oct 10 2013 lmb@suse.com
- Update to 8.4.4rc2
- fix potential deadlock when concurrently fencing and establishing a
connection
- fix potential distributed deadlock during verify or resync
- fix decoding of bitmap vli rle for device sizes > 64 TB
- fix for deadlock when using automatic split-brain-recovery
- only fail empty flushes if no good data is reachable
- avoid to shrink max_bio_size due to peer re-configuration
- fix resume-io after reconnect with broken fence-peer handler
- crm-fence-peer: less cib polling, peer-alive detection using crmadmin,
and other improvements
- OCF RA: avoid too tight pacemaker driven recovery loop on failed
promote, implement adjust_master_score parameter
- fix too large bursts for very slow resync rates
- don't let application IO throttle resync to a stall
- Fixed attaching to disks with fixed size external meta-data (This
regressions was introduced with 8.4.3)
- Fixed a crash when the connection broke at a very exact point in time
while a graceful disconnect executes
- Support for REQ_DISCARD
- Allow parallel promote/demote
- Allow online changing of al-stripes and al-stripe-size with the resize
command
- drbdadm adjust now deals with IP-address changes correctly
- Align the internal object model with drbd-9.0 (away from drbd-8.3)
- New drbd-proxy option "bwlimit"; allow proxy options on host level
- Compiles on Linux v3.10
* Wed Sep 18 2013 lmb@suse.com
- Update drbd version string in specfile so that a future 8.4.4 check-in
will be considered newer than 8.4.4rc1.
- Clean-up specfile based on spec-cleaner
* Mon Sep 16 2013 lmb@suse.com
- Update to drbd 8.4.4rc1
- Disable heartbeat support (heartbeat no longer ships on openSUSE)
- fix decoding of bitmap vli rle for device sizes > 64 TB
- fix for deadlock when using automatic split-brain-recovery
- only fail empty flushes if no good data is reachable
- avoid to shrink max_bio_size due to peer re-configuration
- fix resume-io after reconnect with broken fence-peer handler
- fencing script improvements
- Fixed attaching to disks with fixed size external meta-data (This
regressions was introduced with 8.4.3)
- Allow online changing of al-stripes and al-stripe-size with the resize
command
- drbdadm adjust now deals with IP-address changes correctly
- Align the internal object model with drbd-9.0 (away from drbd-8.3)
- Do not end up in Unconnected state if the connection breaks at a
certain point during the handshake (was introduced with 8.3.12)
- Closed a race condition between promoting and connection handshake,
that could lead to an inconsistent view of the peer's UUIDS
- Fixed a race condition that could lead to a full sync, if connection
breaks at a certain point while starting a regular resync
- Fixed crm-fence-peer.sh for pacemaker 1.1.8
- Fixed a list corruption for read requests that complete with an error
after they were aborted
- Fixed a kernel panic if the device size was an exact multiple of
128MiB
- Fixed a potential memory allocation during deadlock online resize
- Improve the handling of read-errors: Make sure that sectors that had a
read error are overwritten with data from the peer on the next resync
- Expose the data-generation-uuids through /sys/block/drbdXX/drbd/
- The new flag --peer-max-bio-size for drbdmeta create-md is of use if
you plan to use the device for long time without peer
- Fixed a potential protocol error and resulting disconnect/reconnect,
when a disk fails on the secondary node. (Introduced with 8.4.2)
- Do not fail empty flushed on diskless, primary node
- Fixed calculation of master scores for single volume and unconfigured
resources in the drbd.ocf RA
- When the connection breaks during a grace full disconnect DRBD failed
to call the eventually configured fence-peer handler. Fixed.
- Obey md-barrier setting when changed via the disk-options command
- Non blocking queuing of AL-updates; This change significantly improves
the number of IOPs in case the workload does not fit into the
configured AL size. (Backport from drbd-9)
- New options for drbdmeta create-md --al-stripes and --al-stripe-size
to create a larger and striped AL
- Fixed drbdadm adjust of max-bio-bvecs
- Fixed a memory leak of 336 byte per attach/detach cycle
- Fix a potential null-pointer deference when configuring invalid resync
after dependencies
- Fixed IO resuming after connection was established before fence peer
handler returned
- Fixed an issue in the state engine that could cause state lockup with
multiple volumes
- Write all pages of the bitmap if it gets moved during an online resize
operation. (This issue was introduced with 8.3.10)
- Fixed a race condition could cause DRBD to go through a NetworkFailure
state during disconnect
- Fixed a race condition in the disconnect code path that could lead to
a BUG() (introduced with 8.4.0)
- Fixed a write ordering problem on SyncTarget nodes for a write to a
block that gets resynced at the same time. The bug can only be
triggered with a device that has a firmware that actually reorders
writes to the same block (merged from 8.3.13)
- Fixed a potential deadlock during restart of conflicting writes
- Disable the write ordering method "barrier" by default, since it is
not possible for a driver to find out if it works reliably since
2.6.36
- All fixes that went into 8.3.13
- Removed a null pointer access when using on-congestion policy on a
diskless device
- In case of a graceful detach under IO load, wait for the outstanding
IO. (As opposed to aborting IOs as a forcefully detach does)
- Reinstate disabling AL updates with invalidate-remote (8.4.0
regression)
- Reinstate the 'disk-barrier no', 'disk-flushes no', and 'disk-drain
no' switches (8.4.0 regression)
- Backported the request code from DRBD-9. Improves handling of many
corner cases.
- Support FLUSH/FUA bio flags
- Made the establishing of connections faster
- New option 'al-updates no' to disable writing transactions into the
- activity log. It is use full if you prefer a full sync after a primary
crash, for improved performance of a spread out random write work load
- Expose the data generation identifies via sysfs
- "--stop" option for online verify to specify a stop sector
- Fixed a bug that might cause in kernel list corruption triggered by
simultaneous IO on multiple volumes in a single resource
- Fixed a bug that might cause a kernel OOPS in the worker thread while
the receiver tied to establish a connection (drbd-8.4.0 regression)
- Fixed an issue in the receiver that could cause connection triggered
by simultaneous IO on multiple volumes in a single resource
- Consider the discard-my-data flag for all volumes
- Fixed attaching to backing devices that do not support
barriers/flushes, when barriers/flushes are not disabled by the
configuration. (drbd-8.4.0 regression)
- Fixed a rare compatibility issue with DRBD's older than 8.3.7 when
negotiating the bio_size
- Fixed a rare race condition where an empty resync could stall with if
pause/unpause events happen in parallel
- Made the re-establishing of connections quicker, if it got a broken
pipe once. Previously there was a bug in the code caused it to waste
the first successful established connection after a broken pipe event.
- crm-fence-peer.sh: Can now deal with multiple DRBD instances being in
a master/slave group
- Optional load balancing for read requests: new keyword "read-balance"
* Mon May 13 2013 ohering@suse.de
- Make /etc/xen mode 0700 to protect vnc passwords.
* Tue Jul 10 2012 tserong@suse.com
- Don't use /var/lock/subsys in init script (bnc#714643)
* Fri Dec 16 2011 tserong@suse.com
- update to 8.3.11
* Added missing spinlock in compressed bitmap receive (regression introduced
in 8.3.10, could lead to "negative" out-of-sync stats and non-terminating
resync when "use-rle" is enabled)
* Fixed handling of read errors during online verify runs
* Fixes for possible distributed deadlocks during online verify and
checksum based resync processes
* Fixed handling of IO errors with an on-io-error=pass-on policy; the
disk state goes to inconsistent
* Fixed the behavior in case ping-timeout and ping-int are set to the
same value
* Fix for connecting on high latency network links
* Fixed wrong connection drops ("PingAck did not arrive in time") with
asymmetrically congested networks
* Fixed state transitions if fence-peer handler returns after connection was
established again
* Fixes to drbdmeta and drbdsetup for the > 16TByte support
* Made negotiation of max_bio_size conservative instead of optimistic
* Network timeouts for mirrored write requests are now always enforced,
no longer only when the socket is congested
* Sun Sep 18 2011 jengelh@medozas.de
- Remove redundant tags/sections from specfile
(cf. packaging guidelines)
* Mon Feb 21 2011 ro@novell.com
- update to 8.3.10
* Fixed a subtle performance degradation that might affected synchronous
work loads (databases) (introduced in 8.3.9)
* Fixed a locking regression (introduced in 8.3.9)
* Fixed on-no-data-accessible for Primary, SyncTarget nodes (Bugz 332)
* Progress bar for online verify
* Optionally use the resync speed control loop code for the online verify
process as well
* Added code to detect false positives when using data-integrity-alg
* New config option on-congestion and new connection states ahead and behind
* Reduced IO latencies during resync, bitmap exchange and temporal states
* Only build a single kernel module package on distributions that provide
the infrastructure to have kernel version independent modules
* On 64bit architectures allow device sizes up to one petabyte
- update to 8.3.9
* Fix for possible deadlock on IO error during resync
* Fixed a race condition between adding and removing network configuration.
Lead to a BUG_ON() when triggered.
* Fixed spurious full syncs that could happen after an empty resync and
concurrent connection loss.
* Fixed spurious full syncs that happened when connection got lost while
one node was in WFSyncUUID state (Bugz 318)
* Fixed a race in the meta-data update code path, that could lead to forgotten
updates to the meta-data. That in fact could lead to unexpected behavior
at the next connect
* Fixed potential deadlock on detach
* Fixed potential data divergence after multiple failures
* Implicitly create unconfigured devices which are referenced in sync-after
dependencies.
* OCF RA now also works with pacemaker 1.1
* Allow BIO sizes of up to 128kByte. Note: In case drbd-proxy is used, at least
version 1.0.16 of drbd-proxy is required.
* New configuration keyword on-no-data-accessible. Possible values
io-error, and suspend-io. The default is "io-error", which matches the
previous behavior.
* If the fencing policy is set to resource-and-stonith, the primary node
will creates the new current UUID _after_ the fencing handler
returned. (Before it did immediately)
* Rewrote the resync speed control loop code. New configuration parameters
c-plan-ahead, c-fill-target, c-delay-target, c-max-rate, c-min-rate.
* Disable activity log updates when all blocks of an unconnected device is
are out of sync. That can be activated by using "invalidate-remote" on an
unconnected primary.
* Improved IPv6 support: link local addresses
* Improved resync speed display in /proc/drbd
* Thu Oct 21 2010 ro@suse.de
- update to 8.3.8.1
* Revert delay probes, they could potentially lead to stalled resync.
Feature is being re-implemented differently
* DRBD ocf resource agent now treats hostnames case insensitive
- update to 8.3.8
* Do not expose failed local READs to upper layers, regression introduced
in 8.3.3
* Fixed support for devices with 4k hard sector size (again)
* Fixed a potential Oops in the disconnect code
* Fixed a race condition that could cause DRBD to consider the peers disk
as Inconstent after resync instead of UpToDate (Bugz 271)
* Fixed a reace condition that could cause DRBD to consider the peers disk
as Outdated instead of Inconsistent during resync (Bugz 277)
* Disallow to start a resync with invalidate / invalidate-remote when the
source disk is not UpToDate
* Forcing primary works now also for Consistent, not only for Outdated and
Inconsistent (Bugz 266)
* Improved robustness against corrupt or malicous sector addresses when
receiving data
* Added the initial-split-brain, it gets called also if the split-brain gets
automatically resolved
* Added the --assume-clean option for the resize command, it causes drbd to
not resync the new storage after an online grow operation
* drbdadm: Do not segfault if stacked-on-top-of refers to an undefined res
* drbdadm: Do not consider configs with invalid after statements as invalid
* drbdadm: Do not segfault if the peer's proxy section is missing
* drbdadm: Allow nullglob in include statement
* drbdadm: Fixed the use of waitpid
* init script: fix insserv headers (Debian 576901)
* Gave the receiving code the ability to use multiple BIOs for writing a
single data packet; now DRBD works with BIOs up to 32kByte also on LVM
devices; from now on the use_bmbv config option does nothing
* New command check-resize, that allows DRBD to detect offline resizing
and to move internal meta-data accordingly
* Added a control loop, that allows DRBD to find auto tune the resync
speed, on connections with large queues (drbd-proxy)
* --dry-run option for connect; disconnects after sync handshake
* --overwrite-data-of-peer got an alias named --force
* Improvements to crm-fence-peer
* Fixed option parsing and stacking in snapshot-resync-target-lvm.sh
* Compiles on 2.6.33 and 2.6.34
- removed patches:
64bit-fixes.diff (upstream/obsolete)
* Fri Jun 25 2010 tserong@novell.com
- Include Linbit RA
* Sun Apr 11 2010 dmueller@suse.de
- remove KMP subpackage, the kernel modules are part of the kernel
and don't build out of tree anymore
- update to 8.3.7:
* Lots of fixes to the new RPM packaging
* Lots of fixes to the autoconfig stuff
* Following the rename of CONFIG_LBD to CONFIG_LBDAF
* Silenced an assert. Could trigger after changing write ordering (Bugz 261)
* Fixed a race condition between detach and ongoing IO. Very hard to
trigger, caused an OOPS in make_request/drbd_make_request. (Bugz 262)
* Fixed a regression in the resync handshake code introduced before 8.3.3.
That bug causes DRBD to block during the initial handshake when a partial
resync is not possible but a full resync is necessary. Happens very rarely.
(Bugz 260)
* Do not drop into StandAlone mode when connection is lost during authentication
* Corrected a null test in the authentication code, found by conccinelle,
thanks to upstream integration. The chance to trigger that was probably 10^-9.
* crm-fence-peer.sh is now also usable if DRBD is managed from the xen block
helper script
* Fixes to the init script's dependencies
* Backported cleanups that where contributed to the in kernel DRBD
* Allow online resizing of disconnected devices, new option to drbdsetup
drbdsetup /dev/drbdX resize --assume-peer-has-space
* Allow multiple after options in the syncer section for stacked setups
* Correctly process relative paths in include statements in drbd.conf
* New option (-t) for drbdadm to test syntax of config snippets
* Following Linux upstream changes 2.6.32 (SHASH and in_flight issues)
* New /etc/drbd.conf example that suggests the use of /etc/drbd.d/xxx.res
* Fixed a regression introduced shortly before 8.3.3, which might
case a deadlock in DRBD's disconnect code path. (Bugz 258)
* Fixed drbdsetup X resume-io which is needed for the recovery
from the effects of broken fence-peer scripts. (Bugz 256)
* Do not reduce master score of a current Primary on connection loss,
to avoid unnecessary migrations
* Do not display the usage count dialog for /etc/inti.d/drbd status
* Fri Jan 08 2010 vuntz@opensuse.org
- Remove unneeded glib-devel BuildRequires.
* Wed Oct 07 2009 aj@suse.de
- update to 8.3.4:
* Support kernel 2.6.31
* Numerous bug fixes
* Support for Infiniband via SDP (sockets direct protocol)
- Add build fix from upstream.
* Sun Jul 19 2009 coolo@novell.com
- trying to get installation right
* Tue Jul 14 2009 teelynn19@aim.com
- update to 8.3.2
* For kernel 2.6.30 support - see internal changelog of source
* Sun Apr 19 2009 ro@suse.de
- update to 8.3.1
* Fixed drbdadm invalidate on disconnected devices (reg in 8.2.7)
* Fixed a hard to trigger spinlock deadlock when using device stacking
with the upper device having a smaller minor number than the lower device.
(Bugz 210)
* Adding a missing range check in ensure_mdev()
* Implemented a congested_fn; the kernel can keep its pdflushes running now
* Improvements the connection code for high latency links
* Fix for several potential memory leaks when allocating a device
* Use an additional meta data bit to store the fact of an old crashed primary
* Udev rule that populates /dev/drbd/by-res/ and /dev/drbd/by-disk/
* New timeout option: outdated-wfc-timeout
* New drbdmeta option: --ignore-sanity-checks
* Include statement for drbd.conf
* Improvements to drbd-overview.pl
* Fixed snapshot-resync-target-lvm.sh to work with more than 10 devices
* Do not force a full resync after a detach on a primary node
* Compatibility with Linux 2.6.27, 2.6.28 and 2.6.29
- update to 8.3.0
* Fixed 'sleep with spinlock held' in case online verify found a difference
* Fixed error code pathes in request processing.
* Fix for stack smashing in drbdmeta
* Fixed a bug that could lead to a crash when detaching/attaching
on the primary under heavy IO (Bugz 171)
* Fixed a bug in the new epoch code (introduced with 8.2.7).
Might cause crash at reconnect after connection loss during heavy IO
(Bugz 160)
* Fixed a bug in drbdsetup that could cause drbdsetup wait-connect to
miss the connection event.
* Fixed a race condition in the new barrier code. (Reordered barrier ACKs)
* Do not rely on blkdev_issue_flush() returning ENOTSUPP
* bitmap in unmapped pages = support for devices > 4TByte (was DRBD+)
* checksum based resync (was DRBD+)
* support for stacked resource (was DRBD+)
* Added support for stacked resources to the bash completion stuff
* Added missing documentation (manpages)
* Fixed drbdadm handlers for stacked resources
* Support of drbd-proxy in stacked setups
* RedHat cluster suite (rgmanager) integration scripts
* Renamed 'state' to 'role'
* More build compatibility with older vendor kernels
* Added drbd-overview.pl to the packages
- update filelist
* Tue Jan 13 2009 dgollub@suse.de
- Add kernel-syms-rt to build requires to build SLERT KMPs
* Wed Dec 10 2008 lmb@suse.de
- Update with changes from 8a9ba53abe973301639beacc55eec569b43507e5:
- Fix buffer overflow and off-by-one errors in drbd user-space token
parser (bnc#450883).
- Fix resizing of devices.
- Fix a NULL pointer dereference in barrier handling.
- Handle failing request better.
- Race in UUID synchronization.
- Fix a call to a blocking function from within a spinlock.
- drbd-optflags.patch: removed, is now upstream.
* Fri Nov 21 2008 lmb@suse.de
- Update from 8.2.7-rc1 to 8.2.7 proper.
- Endianness fixes.
- Handle out-of-sequence barrier acks.
- Allow DRBD to user other cn_idx values in case our default value is
already taken.
- Although Primary/Diskless/StandAlone is invalid it is not unconfigured
- become UpToDate on both after detach-attach on a connected secondary
device pair
- 2.6.28 compatibility (needed for SLE11 kernel)
- Bugfixes to write barrier handling.
* Mon Oct 27 2008 lmb@suse.de
- Include fixes from upstream
(0e87a13b63e2ef87af6cfcc0d875721c53f37ed9).
- Fixed possible Oops on connection loss during sync handshake.
- Latency improvements.
- Improved barrier support.
* Thu Sep 04 2008 lmb@suse.de
- Imported some changes from upstream, including:
- Made it to compile on Linux-2.6.26
- Fixed online resizing if there is application IO on the fly when the
resize is triggered.
- Fixed online resizing if it is triggered from the secondary node.
- Fixed a possible deadlock in case "become-primary-on-both" is used, and
a resync starts
- Fixed the invocation of the pri-on-incon-degr handler
- Fixed the exit codes of drbdsetup
- sock_create_lite() to avoid a socket->sk leak
- Auto-tune socket buffers if sndbuf-size is set to zero
* Mon Aug 18 2008 mrueckert@suse.de
- remove outdated options in the fillup_and_insserv call
* Mon Aug 18 2008 schwab@suse.de
- Fix name of completions file.
* Tue Jul 15 2008 lmb@suse.de
- Update to 8.2.6 and include all bugfixes from upstream.
- Fix loading of module (bnc#403731).
- Include bash completion for drbdadm.
- Added the before-resync-target handler.
- Fixed the out-of-sync handler.
- Added the max-bio-bvecs option to workaround issues in a stack of
DRBD/LVM/Xen.
- Fix online resizing in case if triggered from secondary.
- Includes bugfixes from 8.0.11 -> 8.0.12 branch.
* Wed Jun 04 2008 ro@suse.de
- buildreq xen-tools only on x86,x86_64
* Tue Jun 03 2008 coolo@suse.de
- avoid packaging a directory of xen-tools with different permissions
* Tue Apr 15 2008 lmb@suse.de
- Update to 8.2.5 (FATE#302403)
- Include online-verify + various fixes to it.
- Fix races between online-verify and application writes.
- Fixed data-integrity-alg features.
- Improved latency.
- Full support for migration of meta-data from 0.7 -> 0.8.
- Fix some more races, bugs, and memory leaks.
* Wed Dec 05 2007 ro@suse.de
- hack to compile with 2.6.24
* Tue Sep 18 2007 ro@suse.de
- do really build a module
* Mon Sep 17 2007 lmb@suse.de
- Update to drbd 8.0.6 for kernel-compatibility (310187)
* Wed Apr 04 2007 lrupp@suse.de
- added module-init-tools to BuildRequires
* Fri Mar 30 2007 rguenther@suse.de
- add flex BuildRequires
- add /etc/modprobe.d directory
* Fri Mar 30 2007 ro@suse.de
- added bison to buildreq
* Mon Jan 15 2007 lmb@suse.de
- Update to 0.7.23 for Linux kernels >2.6.19.
* Mon Oct 30 2006 lmb@suse.de
- Update to the officially released 0.7.22 version.
- Implement "freeze_io" feature.
- convert-MODULE_PARM.diff: drop unneeded patch.
* Fri Oct 06 2006 lmb@suse.de
- Update to 0.7.22:
- In protocol A and B, on connection loss, drbd could "forget" to set
certain areas out of sync.
- fix races between failure in drbd_send_dblock and concurrently
running tl_clear.
- fix potential access-afer-free in drbd_dio_end.
- fix possible list corruption respective resulting deadlock in
receive_DataRequest.
- improved the drbd_thread_stop / start code.
* Mon Aug 14 2006 lmb@suse.de
- Update to 0.7.21.
* Fixed the "syncer stalled" after reconnect symptom.
* Fixed the "stalled in WFParams" after reconnect symptom. The cause
of this bug was actually a misuse of the data socket.
* Allow to set the uplug_watermark to 1, only usefull for very strange
cases.
* The GC comparison code failed to start a resync in case the two
cluster node failed simultaniously (common power failure).
* Fixed DRBD's code to start kernel threads to work on 2.6.17 also.
* IOCTL return codes fixed for 32bit userland - 64 bit kernel
setups.
* New config option "unplug-watermark".
* Released the drbd_alloc_ee() / drbd_free_ee() implementation from
the DRBD+ branch to the main branch.
* Fixed a bug where lc_del() left a list poison in an LRU chache's
hash table. The only way to trigger this bug was:
up (>>200M), primary, mkfs, resize to 200M, down, up
* DRBD now propagates the backing storage's read ahead properties
to upper layers. With devices that read very fast, this is
important.
* GFP_KERNEL was changed to GFP_NOIO in a few places, to make it
more save against deadlocks in the memory subsystem.
* Thu May 04 2006 lmb@suse.de
- Import fixes from 0.7.18:
- Under high memory pressure it was possible to hit a deadlock on a
kmalloc(). Changed the GFP mask, it is no longer possible to deadlock
it with memory pressure.
- With very unlucky network timing during connect DRBD falls into a
connect / drop-connection loop, that as soon as DRBD is in this loop
is very stable. This is fixed now, DRBD detects this situation an
breaks out of it.
- Fix to the init-script. Now it waits until udev has created the device
nodes of _all_ resources.
- A small fix for the 32bit userland 64bit kernel people, running older
kernels.
- Improved handling of IO errors during initial read in of the activity
log.
* Sun Apr 02 2006 agruen@suse.de
- convert-MODULE_PARM.diff: Convert from the obsolete MODULE_PARM
to the new module_param.
* Mon Mar 27 2006 lmb@suse.de
- Fix memory allocation flags for the activity log (GFP_KERNEL ->
GFP_NOIO) to avoid possible deadlock.
* Mon Mar 06 2006 lmb@suse.de
- Import upstream fixes from 0.7.17:
- There was a bug that could cause the activity log to be not applied
after a primary crash, when an other size than 127 elements was
configured.
- There was a bug in the activity log code, that could cause that the
latest update to the AL is omitted at recovery time.
- The "Marked additional XXKB as out-of-synced based on AL." message
showed one one eighth of the real amount.
* Thu Feb 16 2006 lmb@suse.de
- Update to 0.7.16, new fixes:
- DRBD no longer shrinks an consistent device if it gets connected to
an smaller peer or attached to a smaller disk.
- There was a bug related to the degr-wcf-timeout config option, it was
never used in recent DRBD releases. Fixed.
* Fri Feb 03 2006 agruen@suse.de
- drbd.spec: Replace %arch with %_target_cpu.
* Thu Feb 02 2006 ro@suse.de
- added KMP subpackage (required with suse_kernel_module_package)
* Tue Jan 31 2006 lmb@suse.de
- Change km_drbd to a KMP.
- Import fix to deal with serialized recursive calls to
generic_make_request() and avoid a deadlock (SVN r2056).
* Thu Jan 26 2006 lmb@suse.de
- Compile fix for 2.6.16-rc1.
* Wed Jan 25 2006 mls@suse.de
- converted neededforbuild to BuildRequires
* Mon Jan 23 2006 lmb@suse.de
- Import some updated documentation.
* Tue Dec 20 2005 lmb@suse.de
- Update to 0.7.15.
* Thu Dec 01 2005 lmb@suse.de
- Update to 0.7.14/SVN.
* Thu Sep 01 2005 lmb@suse.de
- Switch to stable version 0.7.13.
* Thu Jun 30 2005 meissner@suse.de
- use RPM_OPT_FLAGS correctly.
* Mon Feb 21 2005 lmb@suse.de
- Update to upstream 0.8_pre1 (SVN 1763).
* Wed Feb 02 2005 lmb@suse.de
- Update to upstream 0.7.10 (1754).
* Fri Jan 14 2005 ro@suse.de
- fix typo in specfile
* Wed Dec 01 2004 lmb@suse.de
- Update to upstream version 0.7.6.
* Mon Sep 20 2004 lmb@suse.de
- Merge fixes from SLES9 SP1 with STABLE.
* Fri Sep 03 2004 lmb@suse.de
- Realign with upstream.
* Fri Aug 27 2004 lmb@suse.de
- Allow invalidate if cstate<Connected and Secondary
- Data integrity protection: Disallow the user to make a primary node
SyncTarget via IOCTLs
- Fix modprobe.d documentation (for users who do want to use the new
block major explicitly).
- Cosmetic: Disable XFS statistics by default.
* Wed Aug 25 2004 lmb@suse.de
- Fix human-count handling to avoid more data inconsistency.
- SLES9/SL9.1: Do NOT use new major number by default.
- Pre-generate documentation. Shorten dependencies even more!
* Mon Aug 16 2004 lmb@suse.de
- Shrink dependency list even further.
* Mon Aug 16 2004 lmb@suse.de
- Remove subversion requirement for building with perl hack.
* Tue Aug 10 2004 lmb@suse.de
- Add modprobe.d file so that upgrading from previous versions is
smooth.
* Fri Aug 06 2004 lmb@suse.de
- Update to 0.7.2-final (still from SVN).
- Proper handling of backing storage devices that occasionally fail
READA (=read ahead) requests. (E.g. LVM and MD) DRBD now fails READA
requests itself, if a resynchronisation is running and it would need
to fetch the block from its peer.
- "drbdadm adjust" had a race, which caused random errors. ( Missing
waitpid() ). Fixed now.
- Properly substract SyncPause times from the syncer performance
numbers.
- Fix to the syncer progress bar in /proc/drbd.
* Fri Aug 06 2004 lmb@suse.de
- Fix minor module build issue.
* Wed Aug 04 2004 lmb@suse.de
- Upgrade to 0.7.2-pre from SVN
- Changes block major from 43 to officially reserved 147 and from
/dev/nbXX to /dev/drbdXX.
- Work-around for XFS bug.
- Handle human and timeout counters correctly.
- Some bugfixes and speedups in particular for protocol A and B.
* Wed Jul 07 2004 lmb@suse.de
- Fix various 64bit issues. (Final part of #41538)
* Thu Jul 01 2004 lmb@suse.de
- Reenable fixed zero-copy again. (#42222)
- Fix drbd to work with hard sector sizes != 512bytes (dasd)
(#41538)
- Fix 64bit problem when calling wait_event_interruptible_timeout()
- Merge upstream code cleanups.
* Fri Jun 18 2004 lmb@suse.de
- Update to drbd-0.7-pre8 from upstream:
- Disabling zero-copy IO for now (#41852).
- Bitmap code restructured and lots of bugs fixed.
- Safe default: Always force a full-resync on initial setup.
- Ensuring that we never sync/read from an inconsistent peer.
- Various other fixes.
* Tue Jun 08 2004 lmb@suse.de
- fix ioctls on s390x
- Fix failure in local disk handling.
* Wed Jun 02 2004 lmb@suse.de
- Do not go into in an infinite loop on recursive symlinks under /dev.
- More consistent error handling in the kernel module.
* Tue Jun 01 2004 lmb@suse.de
- Import test harness.
- More fixes from upstream:
+ Rate-limit printks to prevent DoS
+ Test for whether the lower level device is detached in all cases
+ Do not send several Write Hints in a row
* Thu May 27 2004 lmb@suse.de
- Import bugfixes from upstream (equivalent to drbd-0.7-rc1).
(Replaces some previously separate patches.)
- Fix drbddisk to reply to heartbeat status inquiries correctly.
- Clean up build.
- Enable more verbose logging.
* Tue May 18 2004 lmb@suse.de
- Fix recalc_sigpending useage.
- Activate additional debugging useful for test harness runs.
* Wed May 12 2004 lmb@suse.de
- Update to drbd 0.7-pre7, bugfix release
* Thu Apr 29 2004 kraxel@suse.de
- one more kernel build fix, previous was incomplete :-/
* Wed Apr 28 2004 kraxel@suse.de
- fix kernel build failure.
* Sat Apr 24 2004 lmb@suse.de
- Fix random memory corruption bug.
* Fri Apr 23 2004 lmb@suse.de
- Update to latest CVS to fix SMP issues.
* Tue Apr 06 2004 agruen@suse.de
- Add missing include path (testing with Makefile.suse currently
does not catch this case).
* Tue Mar 30 2004 lmb@suse.de
- Update to CVS-2004-03-30
- Should fix #37446
- Add new magic for km test builds if kernel-source is present.
* Fri Mar 19 2004 lmb@suse.de
- Update to latest CVS once more.
- Kill any files laying around from patches or CVS artifacts.
* Mon Mar 15 2004 lmb@suse.de
- Update to latest CVS.
* Thu Mar 04 2004 kraxel@suse.de
- add olh's regparm fix.
* Thu Feb 19 2004 lmb@suse.de
- Upgrade to 0.7_pre5 from upstream.
- Include some hacks to test build of the km_ modules.
* Tue Feb 17 2004 lmb@suse.de
- Stale patch included last time.
* Tue Feb 17 2004 lmb@suse.de
- Fix at least the build on ppc64, x86_64 and ia64.
* Mon Feb 16 2004 lmb@suse.de
- Upgrade to drbd 0.7
- Reenable new & wonderful km_drbd package
* Mon Jan 26 2004 ro@suse.de
- comment out km_drbd package
* Sat Jan 10 2004 adrian@suse.de
- build as user
* Wed Sep 10 2003 lmb@suse.de
- Fix some build failures on ppc64.
- Honor CONFIG_DEBUGSYM for UML build.
* Tue Aug 26 2003 lmb@suse.de
- No longer build the ja & pt docs.
* Tue Aug 19 2003 lmb@suse.de
- Do apply the patch.
* Mon Aug 18 2003 lmb@suse.de
- Fix distribution detection.
* Mon Aug 18 2003 lmb@suse.de
- Added build fixes for building under UML.
- Fix for unacked count << 0.
* Thu Jul 31 2003 lmb@suse.de
- Upgrade to 0.6.6.
* Fri Jul 25 2003 schwab@suse.de
- Respect INSTALL_MOD_PATH.
* Wed Jun 11 2003 kukuk@suse.de
- Add all directories to filelist
* Tue Jun 03 2003 jg@suse.de
- Update to 0.6.4, changes:
- Reworked build system (i.e. better Makefiles)
- SyncAll works forward insead of backwards. Improves performance on some
storage controlers.
- Reworked /etc/init.d/drbd script (i.e. better support of different bash
releases)
* Wed Mar 26 2003 jg@suse.de
- Update to 0.6.3, changes:
- Lockup of primary if secondary fails during resync. Fixed. (Stupid!)
- Probabely SMP only deadlock in the drop-conection code path.
- Improved connect code. (The old code could trap into a distributed
deadlock, resulting in an endless connect/disconnect loop.)
- The 'BitMap too small bug' was actually caused by a patch in
SuSE's distribution kernel. This patch makes DRBD 'more' compatible
with SuSE's kernel.
- Improved code to allocate buffers for the rsynchronisation process.
The old code allocated physical adjacent pages although the syncer
does not need them! The old code could fail under high memory pressure.
- Removed BitMap too small patch (is part of 0.6.3)
- added /etc/ha.d/resource.d/datadisk to filelist so it is possible
to install heartbeat after drbd
- removed unneeded /etc/ha.d/resource.d/drbd-control
* Mon Mar 17 2003 jg@suse.de
- Added "BitMap too small" fix (Bug #25384)
* Wed Feb 12 2003 jg@suse.de
- Updated to 0.6.2
- SMP fix in drbd_dio_end_sec()
- /etc/init.d/drbd knows about returncodes of fsck
* Tue Dec 17 2002 jg@suse.de
- Moved drbdsetup from /usr/sbin to /sbin to support /usr on nfs
- Removed accidentialy included CVS directories from tar-file
* Wed Dec 11 2002 jg@suse.de
- Updated to 0.6.1 final
* Mon Nov 11 2002 ro@suse.de
- changed neededforbuild <jade_dsl> to <openjade>
- changed neededforbuild <sp> to <opensp>
* Wed Oct 02 2002 jg@suse.de
- Updated to 0.6.1-pre17, changes:
- Merged syncer speedup code by Lars G. Ellenberg
- Merged most of Lars' modifications to the ioctl interface
- Marged the bug-fixes from the lge-branch
- Implemented the TimoutCounter in the meta-data code.
- Fixed a bug that could cause lockup of the primary node on
SMP systems using a SCSI device for DRBD, it always happened
during resynchronisation. (!)
- Checking /.buildenv now in buildsystem instead of /etc/*-release
* Tue Sep 03 2002 jg@suse.de
- Init script fixes:
- Removed abortion on non existing block devices (may
break LVM setups)
- Sourcing . /etc/rc.status earlier now
- Allowing execution via rcdrbd link
* Mon Sep 02 2002 jg@suse.de
- Incorporated latest changes from CVS
- Using lge branch now (syncer much faster)
* Wed Aug 21 2002 jg@suse.de
- Fixed manpage generation (should now even build on ppc64)
* Tue Aug 20 2002 jg@suse.de
- Added PreReq tag
* Mon Aug 19 2002 kukuk@suse.de
- fix compilation on UL
* Tue Aug 13 2002 jg@suse.de
- Added documentation stuff again
- Modified init script to comply with LSB
* Mon Aug 12 2002 jg@suse.de
- Updated to latest version from CVS repository
- Removed temporary documentation path from Makefile (does
not build)
* Tue Mar 05 2002 jg@suse.de
- Fixed broken specfile
* Mon Mar 04 2002 jg@suse.de
- updated to bugfix release 0.6.1pre10
- Data-corruption bug in SyncAll fixed (was introduced in pre9)
- Fixed an OOPS in tl_check_sector() (was introduced in pre9)
- Fixed Linux-2.2.x compability (was broken in pre9)
- removed documentation patch (not needed anymore)
* Wed Feb 20 2002 jg@suse.de
- modified init script to honor inittimeout settings
* Wed Feb 20 2002 jg@suse.de
- added -include /usr/src/linux/include/linux/modversions.h
to km_drbd Makefile in case CONFIG_MODVERSIONS is set
- modified the init script to comply to LSB and to skip
the "interactive" part on boot
* Tue Feb 12 2002 jg@suse.de
- added -DMODVERSION and -D__SMP__ to km_drbd Makefile (according
to kernel configuration)
* Thu Jan 31 2002 ro@suse.de
- changed neededforbuild <libpng> to <libpng-devel-packages>
* Tue Jan 29 2002 jg@suse.de
- updated to 0.6.1-pre9
* Thu Dec 20 2001 jg@suse.de
- replaced insserv call in specfile with respective macro
* Wed Dec 19 2001 jg@suse.de
- updated to 0.6.1-pre7 (supports now kernel 2.4)
- removed insserv call after installing
- removed fillup template
- removed some outdated documentation files
* Fri Jul 27 2001 mt@suse.de
- fixed init script to be LSB compliant
* Fri Jul 20 2001 kukuk@suse.de
- changed neededforbuild <gs_fonts> to <ghostscript-fonts-std>
- changed neededforbuild <gs_lib> to <ghostscript-library>
- changed neededforbuild <gs_serv> to <ghostscript-serv>
* Sun Jan 14 2001 mt@suse.de
- added km_drbd subpackage with drbd kernel module source
* Fri Dec 01 2000 mt@suse.de
- added mkdir $RPM_BUILD_ROOT/sbin in spec
* Fri Dec 01 2000 kukuk@suse.de
- move sbin/init.d -> etc/init.d
* Mon Nov 27 2000 mt@suse.de
- fixed link src for rcdrbd in spec file
- changed group to Applications/Clustering
* Thu Nov 23 2000 mt@suse.de
- removed heartbeat from neededforbuild
* Wed Nov 22 2000 mt@suse.de
- changed to LSB installation of run level links
* Fri Nov 10 2000 mt@suse.de
- no module build in spec - drbd module is patched into the kernel
* Wed Nov 08 2000 mt@suse.de
- new package
/etc/drbd.conf /etc/drbd.d /etc/drbd.d/global_common.conf /etc/multipath /etc/multipath/conf.d /etc/multipath/conf.d/drbd.conf /etc/xen /etc/xen/scripts /etc/xen/scripts/block-drbd /usr/lib/drbd /usr/lib/drbd/crm-fence-peer.9.sh /usr/lib/drbd/crm-unfence-peer.9.sh /usr/lib/drbd/notify-emergency-reboot.sh /usr/lib/drbd/notify-emergency-shutdown.sh /usr/lib/drbd/notify-io-error.sh /usr/lib/drbd/notify-out-of-sync.sh /usr/lib/drbd/notify-pri-lost-after-sb.sh /usr/lib/drbd/notify-pri-lost.sh /usr/lib/drbd/notify-pri-on-incon-degr.sh /usr/lib/drbd/notify-split-brain.sh /usr/lib/drbd/notify.sh /usr/lib/drbd/outdate-peer.sh /usr/lib/drbd/scripts /usr/lib/drbd/scripts/drbd /usr/lib/drbd/scripts/drbd-service-shim.sh /usr/lib/drbd/scripts/drbd-wait-promotable.sh /usr/lib/drbd/scripts/ocf.ra.wrapper.sh /usr/lib/drbd/snapshot-resync-target-lvm.sh /usr/lib/drbd/stonith_admin-fence-peer.sh /usr/lib/drbd/unsnapshot-resync-target-lvm.sh /usr/lib/ocf /usr/lib/ocf/resource.d /usr/lib/ocf/resource.d/linbit /usr/lib/ocf/resource.d/linbit/drbd /usr/lib/ocf/resource.d/linbit/drbd-attr /usr/lib/ocf/resource.d/linbit/drbd.shellfuncs.sh /usr/lib/systemd/system/drbd-demote-or-escalate@.service /usr/lib/systemd/system/drbd-lvchange@.service /usr/lib/systemd/system/drbd-promote@.service /usr/lib/systemd/system/drbd-reconfigure-suspend-or-error@.service /usr/lib/systemd/system/drbd-services@.target /usr/lib/systemd/system/drbd-wait-promotable@.service /usr/lib/systemd/system/drbd.service /usr/lib/systemd/system/drbd@.service /usr/lib/systemd/system/drbd@.target /usr/lib/systemd/system/ocf.ra@.service /usr/lib/tmpfiles.d/drbd.conf /usr/lib/udev/rules.d/65-drbd.rules /usr/sbin/drbdadm /usr/sbin/drbdmeta /usr/sbin/drbdmon /usr/sbin/drbdsetup /usr/share/bash-completion/completions/drbdadm /usr/share/doc/packages/drbd-utils /usr/share/doc/packages/drbd-utils/ChangeLog /usr/share/doc/packages/drbd-utils/README.md /usr/share/doc/packages/drbd-utils/drbd.conf.example /usr/share/licenses/drbd-utils /usr/share/licenses/drbd-utils/COPYING /usr/share/man/ja/man5/drbd.conf-9.0.5.gz /usr/share/man/ja/man5/drbd.conf.5.gz /usr/share/man/ja/man8/drbd-9.0.8.gz /usr/share/man/ja/man8/drbd.8.gz /usr/share/man/ja/man8/drbdadm-9.0.8.gz /usr/share/man/ja/man8/drbdadm.8.gz /usr/share/man/ja/man8/drbdmeta-9.0.8.gz /usr/share/man/ja/man8/drbdmeta.8.gz /usr/share/man/ja/man8/drbdmon-9.0.8.gz /usr/share/man/ja/man8/drbdmon.8.gz /usr/share/man/ja/man8/drbdsetup-9.0.8.gz /usr/share/man/ja/man8/drbdsetup.8.gz /usr/share/man/man5/drbd.conf-9.0.5.gz /usr/share/man/man5/drbd.conf.5.gz /usr/share/man/man7/drbd-lvchange@.service.7.gz /usr/share/man/man7/drbd-promote@.service.7.gz /usr/share/man/man7/drbd-reconfigure-suspend-or-error@.service.7.gz /usr/share/man/man7/drbd-services@.target.7.gz /usr/share/man/man7/drbd-wait-promotable@.service.7.gz /usr/share/man/man7/drbd.service.7.gz /usr/share/man/man7/drbd@.service.7.gz /usr/share/man/man7/drbd@.target.7.gz /usr/share/man/man7/ocf.ra@.service.7.gz /usr/share/man/man7/ocf_linbit_drbd-attr.7.gz /usr/share/man/man7/ocf_linbit_drbd.7.gz /usr/share/man/man8/drbd-9.0.8.gz /usr/share/man/man8/drbd.8.gz /usr/share/man/man8/drbdadm-9.0.8.gz /usr/share/man/man8/drbdadm.8.gz /usr/share/man/man8/drbdmeta-9.0.8.gz /usr/share/man/man8/drbdmeta.8.gz /usr/share/man/man8/drbdmon-9.0.8.gz /usr/share/man/man8/drbdmon.8.gz /usr/share/man/man8/drbdsetup-9.0.8.gz /usr/share/man/man8/drbdsetup.8.gz /var/lib/drbd
Generated by rpm2html 1.8.1
Fabrice Bellet, Tue Oct 22 23:58:28 2024