| Index | index by Group | index by Distribution | index by Vendor | index by creation date | index by Name | Mirrors | Help | Search |
| Name: cross-i386-binutils | Distribution: openSUSE Step 15 |
| Version: 2.39 | Vendor: openSUSE |
| Release: 7.41.1 | Build date: Tue Nov 22 01:55:32 2022 |
| Group: Development/Tools/Building | Build host: obs-arm-6 |
| Size: 18140454 | Source RPM: cross-i386-binutils-2.39-7.41.1.src.rpm |
| Packager: https://bugs.opensuse.org | |
| Url: https://www.gnu.org/software/binutils/ | |
| Summary: GNU Binutils | |
C compiler utilities: ar, as, gprof, ld, nm, objcopy, objdump, ranlib, size, strings, and strip. These utilities are needed whenever you want to compile a program or kernel.
GFDL-1.3-only AND GPL-3.0-or-later
* Tue Oct 25 2022 matz@suse.com
- Add binutils-maxpagesize.diff for a problem on old code
streams, where we would generate too large binaries.
* Tue Oct 25 2022 schwab@suse.de
- s390-pic-dso.diff: use %pB instead of %B
* Mon Oct 17 2022 matz@suse.com
- SLE toolchain update of binutils. Update to 2.39 from 2.37,
which means obsoleting and hence removing these patches:
binutils-add-efi-aarch64-1.diff, binutils-add-efi-aarch64-2.diff,
binutils-add-efi-aarch64-3.diff, binutils-fix-keepdebug.diff,
binutils-add-z16-name.diff.
Implements [jsc#SLE-25046, jsc#PED-2029, jsc#PED-2035, jsc#PED-2033,
jsc#PED-2030, jsc#PED-2038, jsc#PED-2032, jsc#PED-2034, jsc#PED-2031,
jsc#SLE-25047]
- This fixes these CVEs relative to 2.37:
[bsc#1188374, bsc#1185597] aka (GCC) PR99935 aka CVE-2021-3648
[bsc#1193929] aka PR28694 aka CVE-2021-45078
[bsc#1194783] aka (GCC) PR98886 aka CVE-2021-46195
[bsc#1197592] aka (GCC) PR105039 aka CVE-2022-27943
[bsc#1202966] aka PR29289 aka CVE-2022-38126
[bsc#1202967] aka PR29290 aka CVE-2022-38127
[bsc#1202969] aka CVE-2021-3826
* Fri Aug 26 2022 matz@suse.com
- Add binutils-pr29482.diff for PR29482, aka CVE-2022-38533
[bsc#1202816]
* Wed Aug 10 2022 mliska@suse.cz
- Rebase binutils-2.39-branch.diff.gz that contains fix for PR29451.
* Mon Aug 08 2022 mliska@suse.cz
- Add binutils-2.39-branch.diff.gz.
- Explicitly enable --enable-warn-execstack=yes and --enable-warn-rwx-segments=yes.
- Add gprofng subpackage.
* Sat Aug 06 2022 mliska@suse.cz
- Update to binutils 2.39:
* The ELF linker will now generate a warning message if the stack is made
executable. Similarly it will warn if the output binary contains a
segment with all three of the read, write and execute permission
bits set. These warnings are intended to help developers identify
programs which might be vulnerable to attack via these executable
memory regions.
The warnings are enabled by default but can be disabled via a command
line option. It is also possible to build a linker with the warnings
disabled, should that be necessary.
* The ELF linker now supports a --package-metadata option that allows
embedding a JSON payload in accordance to the Package Metadata
specification.
* In linker scripts it is now possible to use TYPE=<type> in an output
section description to set the section type value.
* The objdump program now supports coloured/colored syntax
highlighting of its disassembler output for some architectures.
(Currently: AVR, RiscV, s390, x86, x86_64).
* The nm program now supports a --no-weak/-W option to make it ignore
weak symbols.
* The readelf and objdump programs now support a -wE option to prevent
them from attempting to access debuginfod servers when following
links.
* The objcopy program's --weaken, --weaken-symbol, and
- -weaken-symbols options now works with unique symbols as well.
- Rebase binutils-compat-old-behaviour.diff, binutils-revert-hlasm-insns.diff,
binutils-revert-plt32-in-branches.diff and remove binutils-2.38-branch.diff.gz.
- For now use --disable-gprofng.
- Includes fixes for these CVEs:
bnc#1142579 aka CVE-2019-1010204 aka PR23765
* Mon Jun 13 2022 matz@suse.com
(Fake entry from SLE for tracking purposes:)
- For building shim 15.6~rc1 (and later versions) aarch64 image, objcopy
needs to support efi-app-aarch64 target. (bsc#1198458)
Adds binutils-add-efi-aarch64-1.diff,
binutils-add-efi-aarch64-2.diff, binutils-add-efi-aarch64-3.diff .
* Wed May 25 2022 mliska@suse.cz
- Use https for variosu links.
* Wed May 25 2022 mliska@suse.cz
- Update binutils-2.38-branch.diff.gz (to 93054037f1e304e)
in order to include PR29087.
* Mon May 09 2022 schwab@suse.de
- Enable multitarget build on riscv64
- On SLE15 and later, use make -Oline to synchronize configure output by
lines
* Fri May 06 2022 matz@suse.com
(Fake entry from SLE for tracking purposes:)
- Add binutils-fix-keepdebug.diff for fix bsc#1191908, a problem
in crash not accepting some of our .ko.debug files.
* Wed May 04 2022 mliska@suse.cz
- Renumber Sources.
* Wed May 04 2022 mliska@suse.cz
- Fix ExcludeArch for ppc.
* Wed May 04 2022 mliska@suse.cz
- Make multibuild utilize only the main binutils.spec file.
- Remove not needed README.First-for.SUSE.packagers, pre_checkin.sh.
* Mon May 02 2022 mliska@suse.cz
- Start using _multibuild for cross binutils.
* Mon Apr 25 2022 matz@suse.com
- Add binutils-revert-rela.diff to revert back to old behaviour
of not ignoring the in-section content of to be relocated
fields on x86-64, even though that's a RELA architecture.
Compatibility with buggy object files generated by old tools.
[bsc#1198422]
(forward port from SLE)
* Mon Apr 11 2022 matz@suse.com
- Update binutils-2.38-branch.diff.gz (to c210342d7f5) to include
recognition of 'z16' name for 'arch14' on s390. [bsc#1198237]
* Mon Apr 11 2022 matz@suse.com
(Fake entry from SLE for tracking purposes:)
- Add binutils-add-z16-name.diff so that the now official name
z16 for arch14 is recognized. [bsc#1198237]
* Mon Mar 21 2022 meissner@suse.com
- Add usage of a SUSE_ZNOW environment variable which allows switching
on "-z now" by default using "export SUSE_ZNOW=1", similar to
the SUSE_ASNEEDED variable. Adds binutils-znow.patch.
* Thu Mar 10 2022 wbauer@tmo.at
- Update binutils-skip-rpaths.patch: add back fix for boo#1191473,
which got lost in the update to 2.38.
* Fri Mar 04 2022 mliska@suse.cz
- Update binutils-2.38-branch.diff.gz in order to include PR28879.
* Tue Mar 01 2022 matz@suse.com
- From Stefan Brüns <stefan.bruens@rwth-aachen.de>:
* Install symlinks for all target specific tools on
arm-eabi-none [bsc#1185712]
* Thu Feb 24 2022 mliska@suse.cz
- Do not re-generate ld/ldlex.c, ld/ldgram.c, ld/ldgram.h and verify
that corresponding flex/bison files are not modified by a patch.
* Thu Feb 24 2022 mliska@suse.cz
- Use verbose mode for make for cross compilers.
* Wed Feb 23 2022 matz@suse.com
- Make it build on SLE-11 again.
* Tue Feb 22 2022 mliska@suse.cz
- Use verbose mode for make.
* Sat Feb 12 2022 mliska@suse.cz
- Update to binutils 2.38:
* elfedit: Add --output-abiversion option to update ABIVERSION.
* Add support for the LoongArch instruction set.
* Tools which display symbols or strings (readelf, strings, nm, objdump)
have a new command line option which controls how unicode characters are
handled. By default they are treated as normal for the tool. Using
- -unicode=locale will display them according to the current locale.
Using --unicode=hex will display them as hex byte values, whilst
- -unicode=escape will display them as escape sequences. In addition
using --unicode=highlight will display them as unicode escape sequences
highlighted in red (if supported by the output device).
* readelf -r dumps RELR relative relocations now.
* Support for efi-app-aarch64, efi-rtdrv-aarch64 and efi-bsdrv-aarch64 has been
added to objcopy in order to enable UEFI development using binutils.
* ar: Add --thin for creating thin archives. -T is a deprecated alias without
diagnostics. In many ar implementations -T has a different meaning, as
specified by X/Open System Interface.
* Add support for AArch64 system registers that were missing in previous
releases.
* Add support for the LoongArch instruction set.
* Add a command-line option, -muse-unaligned-vector-move, for x86 target
to encode aligned vector move as unaligned vector move.
* Add support for Cortex-R52+ for Arm.
* Add support for Cortex-A510, Cortex-A710, Cortex-X2 for AArch64.
* Add support for Cortex-A710 for Arm.
* Add support for Scalable Matrix Extension (SME) for AArch64.
* The --multibyte-handling=[allow|warn|warn-sym-only] option tells the
assembler what to when it encoutners multibyte characters in the input. The
default is to allow them. Setting the option to "warn" will generate a
warning message whenever any multibyte character is encountered. Using the
option to "warn-sym-only" will make the assembler generate a warning whenever a
symbol is defined containing multibyte characters. (References to undefined
symbols will not generate warnings).
* Outputs of .ds.x directive and .tfloat directive with hex input from
x86 assembler have been reduced from 12 bytes to 10 bytes to match the
output of .tfloat directive.
* Add support for 'armv8.8-a', 'armv9-a', 'armv9.1-a', 'armv9.2-a' and
'armv9.3-a' for -march in AArch64 GAS.
* Add support for 'armv8.7-a', 'armv8.8-a', 'armv9-a', 'armv9.1-a',
'armv9.2-a' and 'armv9.3-a' for -march in Arm GAS.
* Add support for Intel AVX512_FP16 instructions.
* Add -z pack-relative-relocs/-z no pack-relative-relocs to x86 ELF
linker to pack relative relocations in the DT_RELR section.
* Add support for the LoongArch architecture.
* Add -z indirect-extern-access/-z noindirect-extern-access to x86 ELF
linker to control canonical function pointers and copy relocation.
* Add --max-cache-size=SIZE to set the the maximum cache size to SIZE
bytes.
- Add binutils-2.38-branch.diff.gz.
- Removed deletion of man pages as they should be properly packages
in tarball.
- Rebased patches: aarch64-common-pagesize.patch, add-ulp-section.diff,
binutils-bfd_h.patch, binutils-revert-nm-symversion.diff,
binutils-revert-plt32-in-branches.diff, binutils-skip-rpaths.patch
and binutils-compat-old-behaviour.diff.
* Fri Feb 04 2022 matwey.kornilov@gmail.com
- Enable PRU architecture for AM335x CPU (Beagle Bone Black board)
* Thu Jan 27 2022 dmueller@suse.com
- use fdupes on datadir
- remove RPM_BUILD_ROOT usage and other cleanups
* Fri Nov 12 2021 mliska@suse.cz
- Rebase binutils-2.37-branch.diff: fixes PR28494.
* Fri Nov 05 2021 matz@suse.com
- Add binutils-revert-hlasm-insns.diff for compatibility on old
code stream that expect 'brcl 0,label' to not be disassembled
as 'jgnop label' on s390x. [bsc#1192267]
* Wed Nov 03 2021 mliska@suse.cz
- Rebase binutils-2.37-branch.diff: fixes PR28523 aka boo#1188941.
* Tue Nov 02 2021 matz@suse.com
- Fix empty man-pages from broken release tarball [PR28144].
* Mon Nov 01 2021 mliska@suse.cz
- Update binutils-skip-rpaths.patch with contained a memory corruption
(boo#1191473).
* Fri Oct 08 2021 matz@suse.com
- Configure with --disable-x86-used-note on old code streams.
- Disable libalternatives temporarily for build cycle reasons.
- make TARGET-bfd=headers again, we patch bfd-in.h
- This state submitted to SLE12 and SLE15 code streams for annual
toolchain update. [jsc#PM-2767, jsc#SLE-21561, jsc#SLE-19618]
- Bump binutils-2.37-branch.diff to 66d5c7003, to include fixes for
PR28422, PR28192, PR28391. Also adds some s390x arch14
instructions [jsc#SLE-18637].
* Fri Sep 10 2021 Stefan Schubert schubi@suse.de
- Using libalternatives instead of update-alternatives.
* Wed Sep 08 2021 matz@suse.com
- Adjust for testsuite fails on older products that configure
binutils in different ways, adds binutils-compat-old-behaviour.diff
and adjusts binutils-revert-nm-symversion.diff and
binutils-revert-plt32-in-branches.diff.
* Tue Aug 03 2021 mliska@suse.cz
- Bump binutils-2.37-branch.diff: fixes PR28138.
* Thu Jul 22 2021 mliska@suse.cz
- Use LTO & PGO build.
* Thu Jul 22 2021 mliska@suse.cz
- Update to binutils 2.37:
* The GNU Binutils sources now requires a C99 compiler and library to
build.
* Support for the arm-symbianelf format has been removed.
* Support for Realm Management Extension (RME) for AArch64 has been
added.
* A new linker option '-z report-relative-reloc' for x86 ELF targets
has been added to report dynamic relative relocations.
* A new linker option '-z start-stop-gc' has been added to disable
special treatment of __start_*/__stop_* references when
- -gc-sections.
* A new linker options '-Bno-symbolic' has been added which will
cancel the '-Bsymbolic' and '-Bsymbolic-functions' options.
* The readelf tool has a new command line option which can be used to
specify how the numeric values of symbols are reported.
- -sym-base=0|8|10|16 tells readelf to display the values in base 8,
base 10 or base 16. A sym base of 0 represents the default action
of displaying values under 10000 in base 10 and values above that in
base 16.
* A new format has been added to the nm program. Specifying
'--format=just-symbols' (or just using -j) will tell the program to
only display symbol names and nothing else.
* A new command line option '--keep-section-symbols' has been added to
objcopy and strip. This stops the removal of unused section symbols
when the file is copied. Removing these symbols saves space, but
sometimes they are needed by other tools.
* The '--weaken', '--weaken-symbol' and '--weaken-symbols' options
supported by objcopy now make undefined symbols weak on targets that
support weak symbols.
* Readelf and objdump can now display and use the contents of .debug_sup
sections.
* Readelf and objdump will now follow links to separate debug info
files by default. This behaviour can be stopped via the use of the
new '-wN' or '--debug-dump=no-follow-links' options for readelf and
the '-WN' or '--dwarf=no-follow-links' options for objdump. Also
the old behaviour can be restored by the use of the
'--enable-follow-debug-links=no' configure time option.
The semantics of the =follow-links option have also been slightly
changed. When enabled, the option allows for the loading of symbol
tables and string tables from the separate files which can be used
to enhance the information displayed when dumping other sections,
but it does not automatically imply that information from the
separate files should be displayed.
If other debug section display options are also enabled (eg
'--debug-dump=info') then the contents of matching sections in both
the main file and the separate debuginfo file *will* be displayed.
This is because in most cases the debug section will only be present
in one of the files.
If however non-debug section display options are enabled (eg
'--sections') then the contents of matching parts of the separate
debuginfo file will *not* be displayed. This is because in most
cases the user probably only wanted to load the symbol information
from the separate debuginfo file. In order to change this behaviour
a new command line option --process-links can be used. This will
allow di0pslay options to applied to both the main file and any
separate debuginfo files.
* Nm has a new command line option: '--quiet'. This suppresses "no
symbols" diagnostic.
- Includes fixes for these CVEs:
bnc#1181452 aka CVE-2021-20197 aka PR26945
bnc#1183511 aka CVE-2021-20284 aka PR26931
bnc#1184519 aka CVE-2021-20294 aka PR26929
bnc#1184620 aka CVE-2021-3487 aka PR26946
bnc#1184794 aka CVE-2020-35448 aka PR26574
- Also fixes:
bsc#1183909 - slow performance of stripping some binaries
- Rebased patches: binutils-build-as-needed.diff, binutils-fix-abierrormsg.diff,
binutils-fix-invalid-op-errata.diff, binutils-fix-relax.diff,
binutils-revert-nm-symversion.diff, binutils-revert-plt32-in-branches.diff
- Removed patches (are in upstream): ppc-ensure-undef-dynamic-weak-undefined.patch and
ppc-use-local-plt.patch.
- Add binutils-2.37-branch.diff.gz.
* Fri May 07 2021 schwab@suse.de
- ppc-ensure-undef-dynamic-weak-undefined.patch: PPC: ensure_undef_dynamic
on weak undef only in plt
- ppc-use-local-plt.patch: PowerPC use_local_plt (prerequisite for above
patch)
* Fri Mar 26 2021 mliska@suse.cz
- Update 2.36 branch diff which fixes PR27587.
* Wed Mar 03 2021 mliska@suse.cz
- Do not run make TARGET-bfd=headers separately.
* Mon Mar 01 2021 mliska@suse.cz
- Bump 2.36 branch diff (includes fix for PR27441 aka bsc#1182252).
* Thu Feb 04 2021 mliska@suse.cz
- Bump 2.36 branch diff.
* Wed Feb 03 2021 mliska@suse.cz
- Update 2.36 branch diff which should fix PR27311 completely.
It fixes also PR27284.
- Remove temporary fix 0001-PR27311-ld.bfd-symbol-from-plugin-undefined-referenc.patch.
* Tue Feb 02 2021 mliska@suse.cz
- Add temporary upstream fix for PR27311
0001-PR27311-ld.bfd-symbol-from-plugin-undefined-referenc.patch.
* Sun Jan 24 2021 mliska@suse.cz
- Update to binutils 2.36:
New features in the Assembler:
General:
* When setting the link order attribute of ELF sections, it is now
possible to use a numeric section index instead of symbol name.
* Added a .nop directive to generate a single no-op instruction in
a target neutral manner. This instruction does have an effect on
DWARF line number generation, if that is active.
* Removed --reduce-memory-overheads and --hash-size as gas now
uses hash tables that can be expand and shrink automatically.
X86/x86_64:
* Add support for AVX VNNI, HRESET, UINTR, TDX, AMX and Key
Locker instructions.
* Support non-absolute segment values for lcall and ljmp.
* Add {disp16} pseudo prefix to x86 assembler.
* Configure with --enable-x86-used-note by default for Linux/x86.
ARM/AArch64:
* Add support for Cortex-A78, Cortex-A78AE and Cortex-X1,
Cortex-R82, Neoverse V1, and Neoverse N2 cores.
* Add support for ETMv4 (Embedded Trace Macrocell), ETE (Embedded
Trace Extension), TRBE (Trace Buffer Extension), CSRE (Call
Stack Recorder Extension) and BRBE (Branch Record Buffer
Extension) system registers.
* Add support for Armv8-R and Armv8.7-A ISA extensions.
* Add support for DSB memory nXS barrier, WFET and WFIT
instruction for Armv8.7.
* Add support for +csre feature for -march. Add CSR PDEC
instruction for CSRE feature in AArch64.
* Add support for +flagm feature for -march in Armv8.4 AArch64.
* Add support for +ls64 feature for -march in Armv8.7
AArch64. Add atomic 64-byte load/store instructions for this
feature.
* Add support for +pauth (Pointer Authentication) feature for
- march in AArch64.
New features in the Linker:
* Add --error-handling-script=<NAME> command line option to allow
a helper script to be invoked when an undefined symbol or a
missing library is encountered. This option can be suppressed
via the configure time switch: --enable-error-handling-script=no.
* Add -z x86-64-{baseline|v[234]} to the x86 ELF linker to mark
x86-64-{baseline|v[234]} ISA level as needed.
* Add -z unique-symbol to avoid duplicated local symbol names.
* The creation of PE format DLLs now defaults to using a more
secure set of DLL characteristics.
* The linker now deduplicates the types in .ctf sections. The new
command-line option --ctf-share-types describes how to do this:
its default value, share-unconflicted, produces the most compact
output.
* The linker now omits the "variable section" from .ctf sections
by default, saving space. This is almost certainly what you
want unless you are working on a project that has its own
analogue of symbol tables that are not reflected in the ELF
symtabs.
New features in other binary tools:
* The ar tool's previously unused l modifier is now used for
specifying dependencies of a static library. The arguments of
this option (or --record-libdeps long form option) will be
stored verbatim in the __.LIBDEP member of the archive, which
the linker may read at link time.
* Readelf can now display the contents of LTO symbol table
sections when asked to do so via the --lto-syms command line
option.
* Readelf now accepts the -C command line option to enable the
demangling of symbol names. In addition the --demangle=<style>,
- -no-demangle, --recurse-limit and --no-recurse-limit options
are also now availale.
- Includes fixes for these CVEs:
bnc#1179898 aka CVE-2020-16590 aka PR25821
bnc#1179899 aka CVE-2020-16591 aka PR25822
bnc#1179900 aka CVE-2020-16592 aka PR25823
bnc#1179901 aka CVE-2020-16593 aka PR25827
bnc#1179902 aka CVE-2020-16598 aka PR25840
bnc#1179903 aka CVE-2020-16599 aka PR25842
bnc#1180451 aka CVE-2020-35493 aka PR25307
bnc#1180454 aka CVE-2020-35496 aka PR25308
bnc#1180461 aka CVE-2020-35507 aka PR25308
- Rebase the following patches:
* binutils-fix-relax.diff
* binutils-revert-nm-symversion.diff
* binutils-revert-plt32-in-branches.diff
- Add missing dependency on bc (ld.gold testsuite uses it).
- Use --enable-obsolete for cross builds as ia64 is deprecated now.
- Add binutils-2.36-branch.diff.gz.
* Fri Dec 04 2020 matz@suse.com
- Add binutils-fix-relax.diff to fix linking relaxation problems
with old object files hitting some enterprise software. [bsc#1179341]
* Mon Nov 23 2020 matz@suse.com
- Update binutils-2.35-branch.diff.gz to commit 1c5243df:
* Fixes PR26520, aka [bsc#1179036], a problem in addr2line with
certain DWARF variable descriptions.
* Also fixes PR26711, PR26656, PR26655, PR26929, PR26808, PR25878,
PR26740, PR26778, PR26763, PR26685, PR26699, PR26902, PR26869,
PR26711
* The above includes fixes for dwo files produced by modern dwp,
fixing several problems in the DWARF reader.
* Mon Oct 12 2020 stefan.bruens@rwth-aachen.de
- Reapply spec file cleanup from format_spec_file
- Remove a SLE10 version check
* Mon Sep 21 2020 mliska@suse.cz
- Update to 2.35.1 and rebased branch diff:
* This is a point release over the previous 2.35 version, containing bug
fixes, and as an exception to the usual rule, one new feature. The
new feature is the support for a new directive in the assembler:
".nop". This directive creates a single no-op instruction in whatever
encoding is correct for the target architecture. Unlike the .space or
.fill this is a real instruction, and it does affect the generation of
DWARF line number tables, should they be enabled.
* Tue Sep 15 2020 matz@suse.com
- Update binutils-2.35-branch.diff.gz to commit 23f268a0:
* Add xBPF target
* Fix various problems with DWARF 5 support in gas
- Toolchain module update for SLE15 [jsc#ECO-2373]
- Includes changes that were SLE-only in binutils-add-z15-name.diff
for [bsc#1160590, jsc#SLE-7903 aka jsc#SLE-7464]
- Amend binutils-revert-plt32-in-branches.diff to adjust also new
testcases.
* Sat Aug 15 2020 mliska@suse.cz
- Add binutils-2.35-branch.diff.gz: it includes fix for
nm -B for objects compiled with -flto and -fcommon.
* Fri Aug 07 2020 matz@suse.com
- Add binutils-revert-nm-symversion.diff to be compatible with old
output of nm relied on in scripts.
- Add binutils-fix-abierrormsg.diff to work around an eager (new)
error message occuring without inputs and as-needed (affects
nvme-cli build).
* Fri Jul 24 2020 mliska@suse.cz
- Update to binutils 2.35:
* The asseembler can now produce DWARF-5 format line number tables.
* Readelf now has a "lint" mode to enable extra checks of the files it is processing.
* Readelf will now display "[...]" when it has to truncate a symbol name.
The old behaviour - of displaying as many characters as possible, up to
the 80 column limit - can be restored by the use of the --silent-truncation
option.
* The linker can now produce a dependency file listing the inputs that it
has processed, much like the -M -MP option supported by the compiler.
- Regenerate add-ulp-section.diff with -p1 due to a fuzzing issue.
- Remove binutils-2.34-branch.diff.gz.
- Regenerate binutils-build-as-needed.diff due to a fuzzing issue.
- Regenerate binutils-fix-invalid-op-errata.diff as one hunk was upstreamed.
- Remove upstreamed patch binutils-pr25593.diff.
- Regenerate unit-at-a-time.patch due to a fuzzing issue.
- Regenerate binutils-revert-plt32-in-branches.diff.
* Wed Mar 25 2020 mliska@suse.cz
- Update binutils-2.34-branch.diff.gz.
* Fri Feb 28 2020 mliska@suse.cz
- Remove fix-try_load_plugin.patch as it is part
of the updated binutils-2.34-branch.diff.gz patch.
* Wed Feb 26 2020 rguenther@suse.com
- Add binutils-pr25593.diff to fix DT_NEEDED order with -flto
[bsc#1163744]
* Tue Feb 18 2020 mliska@suse.cz
- Update fix-try_load_plugin.patch to latest version.
* Tue Feb 18 2020 mliska@suse.cz
- Add fix-try_load_plugin.patch in order to fix fallback caused
by backport for PR25355.
* Sat Feb 01 2020 mliska@suse.cz
- Update to binutils 2.34:
* The disassembler (objdump --disassemble) now has an option to
generate ascii art thats show the arcs between that start and end
points of control flow instructions.
* The binutils tools now have support for debuginfod. Debuginfod is a
HTTP service for distributing ELF/DWARF debugging information as
well as source code. The tools can now connect to debuginfod
servers in order to download debug information about the files that
they are processing.
* The assembler and linker now support the generation of ELF format
files for the Z80 architecture.
- Rename and get binutils-2.34-branch.diff.gz (boo#1160254).
- Rebase add-ulp-section.diff, binutils-revert-plt32-in-branches.diff,
cross-avr-size.patch and binutils-skip-rpaths.patch.
- Add new subpackages for libctf and libctf-nobfd.
- Disable LTO due to boo#1163333.
- Includes fixes for these CVEs:
bnc#1153768 aka CVE-2019-17451 aka PR25070
bnc#1153770 aka CVE-2019-17450 aka PR25078
* Tue Jan 07 2020 schwab@suse.de
- Disable LTO during testsuite run
* Wed Nov 20 2019 matz@suse.com
- Add binutils-fix-invalid-op-errata.diff to fix various
build fails on aarch64 (PR25210, bsc#1157755).
* Mon Nov 18 2019 matz@suse.com
- Add add-ulp-section.diff for user space live patching.
* Tue Oct 22 2019 mliska@suse.cz
- Update to binutils 2.33.1:
* Adds support for the Arm Scalable Vector Extension version 2
(SVE2) instructions, the Arm Transactional Memory Extension (TME)
instructions and the Armv8.1-M Mainline and M-profile Vector
Extension (MVE) instructions.
* Adds support for the Arm Cortex-A76AE, Cortex-A77 and Cortex-M35P
processors and the AArch64 Cortex-A34, Cortex-A65, Cortex-A65AE,
Cortex-A76AE, and Cortex-A77 processors.
* Adds a .float16 directive for both Arm and AArch64 to allow
encoding of 16-bit floating point literals.
* For MIPS, Add -m[no-]fix-loongson3-llsc option to fix (or not)
Loongson3 LLSC Errata. Add a --enable-mips-fix-loongson3-llsc=[yes|no]
configure time option to set the default behavior. Set the default
if the configure option is not used to "no".
* The Cortex-A53 Erratum 843419 workaround now supports a choice of
which workaround to use. The option --fix-cortex-a53-843419 now
takes an optional argument --fix-cortex-a53-843419[=full|adr|adrp]
which can be used to force a particular workaround to be used.
See --help for AArch64 for more details.
* Add support for GNU_PROPERTY_AARCH64_FEATURE_1_BTI and
GNU_PROPERTY_AARCH64_FEATURE_1_PAC in ELF GNU program properties
in the AArch64 ELF linker.
* Add -z force-bti for AArch64 to enable GNU_PROPERTY_AARCH64_FEATURE_1_BTI
on output while warning about missing GNU_PROPERTY_AARCH64_FEATURE_1_BTI
on inputs and use PLTs protected with BTI.
* Add -z pac-plt for AArch64 to pick PAC enabled PLTs.
* Add --source-comment[=<txt>] option to objdump which if present,
provides a prefix to source code lines displayed in a disassembly.
* Add --set-section-alignment <section-name>=<power-of-2-align>
option to objcopy to allow the changing of section alignments.
* Add --verilog-data-width option to objcopy for verilog targets to
control width of data elements in verilog hex format.
* The separate debug info file options of readelf (--debug-dump=links
and --debug-dump=follow) and objdump (--dwarf=links and
- -dwarf=follow-links) will now display and/or follow multiple
links if more than one are present in a file. (This usually
happens when gcc's -gsplit-dwarf option is used).
In addition objdump's --dwarf=follow-links now also affects its
other display options, so that for example, when combined with
- -syms it will cause the symbol tables in any linked debug info
files to also be displayed. In addition when combined with
- -disassemble the --dwarf= follow-links option will ensure that
any symbol tables in the linked files are read and used when
disassembling code in the main file.
* Add support for dumping types encoded in the Compact Type Format
to objdump and readelf.
- Includes fixes for these CVEs:
bnc#1126826 aka CVE-2019-9077 aka PR1126826
bnc#1126829 aka CVE-2019-9075 aka PR1126829
bnc#1126831 aka CVE-2019-9074 aka PR24235
bnc#1140126 aka CVE-2019-12972 aka PR23405
bnc#1143609 aka CVE-2019-14444 aka PR24829
bnc#1142649 aka CVE-2019-14250 aka PR90924
- Remove patches that are now included in the release:
binutils-2.32-branch.diff.gz, binutils-fix-ld-segv.diff,
binutils-pr24486.patch, riscv-abi-check.patch,
rx-gas-padding-pr24464.patch.
- Add binutils-2.33-branch.diff.gz patch.
- Rebase binutils-revert-plt32-in-branches.diff and
cross-avr-size.patch patch.
* Tue Oct 15 2019 matz@suse.com
- Add binutils-fix-ld-segv.diff to fix a segfault in ld
when building some versions of pacemaker. [bsc#1154025,
bsc#1154016]
* Wed Oct 02 2019 matz@suse.com
- Add avr, epiphany and rx to target_list so that the common
binutils can handle all objects we can create with crosses.
[bsc#1152590]
* Mon Sep 09 2019 matz@suse.com
- Update to current 2.32 branch @7b468db3 adding
binutils-2.32-branch.diff.gz [jsc#ECO-368].
- Includes fixes for these CVEs:
bsc#1109412 aka CVE-2018-17358 aka PR23686
bsc#1109413 aka CVE-2018-17359 aka PR23686
bsc#1109414 aka CVE-2018-17360 aka PR23685
bsc#1111996 aka CVE-2018-18309 aka PR23770
bsc#1112534 aka CVE-2018-18484 aka GCC PR87636
bsc#1112535 aka CVE-2018-18483 aka PR23767
bsc#1113247 aka CVE-2018-18607 aka PR23805
bsc#1113252 aka CVE-2018-18606 aka PR23806
bsc#1113255 aka CVE-2018-18605 aka PR23804
bsc#1116827 aka CVE-2018-17985 aka GCC PR87335
bsc#1118830 aka CVE-2018-19932 aka PR23932
bsc#1118831 aka CVE-2018-19931 aka PR23942
bsc#1120640 aka CVE-2018-1000876 aka PR23994
bsc#1121034 aka CVE-2018-20651 aka PR24041
bsc#1121035 aka CVE-2018-20623 aka PR24049
bsc#1121056 aka CVE-2018-20671 aka PR24005
bsc#1142772 aka CVE-2019-1010180 aka PR23657
- Refresh s390-biarch.diff and
binutils-revert-plt32-in-branches.diff .
- For the SLE12 package this also removes patches
binutils-z13-1.diff, binutils-z13-2.diff,
binutils-z13-3.diff, binutils-z13-4.diff and binutils-z13-5.diff .
* Sat Aug 31 2019 dmueller@suse.com
- enable xtensa architecture (Tensilica lc6 and related)
- Fix SUSE typo in README package name
* Mon Jul 22 2019 mliska@suse.cz
- Use -ffat-lto-objects in order to provide assembly for static libs
(boo#1141913).
* Mon Jun 03 2019 matz@suse.com
Fake entry for SLE12 package variant only:
- Add support for new z13 instructions. [fate#327074, jsc#SLE-6206,
bsc#1137271]
Adds patches binutils-z13-1.diff, binutils-z13-2.diff,
binutils-z13-3.diff, binutils-z13-4.diff and binutils-z13-5.diff .
* Mon Apr 29 2019 mliska@suse.cz
- Add binutils-pr24486.patch: fix for PR24486 (boo#1133131 boo#1133232).
* Tue Apr 23 2019 mliska@suse.cz
- Add rx-gas-padding-pr24464.patch: fix for PR24464.
* Wed Apr 03 2019 schwab@suse.de
- riscv-abi-check.patch: Don't check ABI flags if no code section
* Tue Feb 19 2019 mliska@suse.cz
- Add binutils.keyring and verify signature.
* Tue Feb 05 2019 mliska@suse.cz
- Add disk and RAM (for ppc, ppc64 and ppc64le) constraint with _constraints.
* Mon Feb 04 2019 mliska@suse.cz
- Update to binutils 2.32:
* The binutils now support for the C-SKY processor series.
* The x86 assembler now supports a -mvexwig=[0|1] option to control
encoding of VEX.W-ignored (WIG) VEX instructions.
It also has a new -mx86-used-note=[yes|no] option to generate (or
not) x86 GNU property notes.
* The MIPS assembler now supports the Loongson EXTensions R2 (EXT2),
the Loongson EXTensions (EXT) instructions, the Loongson Content
Address Memory (CAM) ASE and the Loongson MultiMedia extensions
Instructions (MMI) ASE.
* The addr2line, c++filt, nm and objdump tools now have a default
limit on the maximum amount of recursion that is allowed whilst
demangling strings. This limit can be disabled if necessary.
* Objdump's --disassemble option can now take a parameter,
specifying the starting symbol for disassembly. Disassembly will
continue from this symbol up to the next symbol or the end of the
function.
* The BFD linker will now report property change in linker map file
when merging GNU properties.
* The BFD linker's -t option now doesn't report members within
archives, unless -t is given twice. This makes it more useful
when generating a list of files that should be packaged for a
linker bug report.
* The GOLD linker has improved warning messages for relocations that
refer to discarded sections.
- Remove binutils-2.31-branch.diff.gz, fix-pr23919-1.diff,
fix-pr23919-2.diff, fix-pr23919-3.diff,
gold-depend-on-opcodes.diff and s390-relro.diff.
- Refresh binutils-skip-rpaths.patch, s390-biarch.diff, cross-avr-size.patch
and binutils-revert-plt32-in-branches.diff.
* Thu Jan 24 2019 matz@suse.com
- Add s390-relro.diff to improve relro support on s390
[fate#326356]
* Thu Dec 06 2018 matz@suse.com
- Fix the fix for PR23919 [bsc#1118644]:
rename handle-ELF-compressed-header-alignment-correctly-by-.patch
to fix-pr23919-1.diff and add fix-pr23919-2.diff
and fix-pr23919-3.diff .
* Tue Nov 27 2018 mliska@suse.cz
- Add handle-ELF-compressed-header-alignment-correctly-by-.patch:
PR23919.
* Tue Aug 28 2018 matz@suse.com
- Update to binutils-2_31-branch @e51abf7e3, minor bugfixes in
the support for the X86_ISA_1_* notes. Adds
patch binutils-2.31-branch.diff.gz .
- Add binutils-revert-plt32-in-branches.diff on anything older
than Tumbleweed to not break old tools not expecting
PLT32 instead of PC32 relocs on x86_64.
- Includes fixes for these CVEs:
* from 2.30:
bnc#1065643 aka CVE-2017-15996 aka PR22361
bnc#1065689 aka CVE-2017-15939 aka PR22205
bnc#1065693 aka CVE-2017-15938 aka PR22209
bnc#1068640 aka CVE-2017-16826 aka PR22376
bnc#1068643 aka CVE-2017-16832 aka PR22373
bnc#1068887 aka CVE-2017-16831 aka PR22385
bnc#1068888 aka CVE-2017-16830 aka PR22384
bnc#1068950 aka CVE-2017-16829 aka PR22307
bnc#1069176 aka CVE-2017-16828 aka PR22386
bnc#1069202 aka CVE-2017-16827 aka PR22306
* from 2.31:
bnc#1077745 aka CVE-2018-6323 aka PR22746
bnc#1079103 aka CVE-2018-6543 aka PR22769
bnc#1079741 aka CVE-2018-6759 aka PR22794
bnc#1080556 aka CVE-2018-6872 aka PR22788
bnc#1081527 aka CVE-2018-7208 aka PR22741
bnc#1083528 aka CVE-2018-7570 aka PR22881
bnc#1083532 aka CVE-2018-7569 aka PR22895
bnc#1086608 aka CVE-2018-8945 aka PR22809
bnc#1086784 aka CVE-2018-7643 aka PR22905
bnc#1086786 aka CVE-2018-7642 aka PR22887
bnc#1086788 aka CVE-2018-7568 aka PR22894
bnc#1090997 aka CVE-2018-10373 aka PR23065
bnc#1091015 aka CVE-2018-10372 aka PR23064
bnc#1091365 aka CVE-2018-10535 aka PR23113
bnc#1091368 aka CVE-2018-10534 aka PR23110
- Removes binutils-fix-pr21964.diff as it's included in 2.31.
Rebase testsuite.diff and aarch64-common-pagesize.patch .
* Tue Jul 31 2018 rguenther@suse.com
- Disable -z separate-code everywhere but in Tumbleweed.
* Mon Jul 16 2018 rguenther@suse.com
- Update to binutils 2.31
* The AArch64 port now supports showing disassembly notes which are emitted
when inconsistencies are found with the instruction that may result in the
instruction being invalid. These can be turned on with the option -M notes
to objdump.
* The AArch64 port now emits warnings when a combination of an instruction and
a named register could be invalid.
* Added O modifier to ar to display member offsets inside an archive
* The ADR and ADRL pseudo-instructions supported by the ARM assembler
now only set the bottom bit of the address of thumb function symbols
if the -mthumb-interwork command line option is active.
* Add --generate-missing-build-notes=[yes|no] option to create (or not) GNU
Build Attribute notes if none are present in the input sources. Add a
- -enable-generate-build-notes=[yes|no] configure time option to set the
default behaviour. Set the default if the configure option is not used
to "no".
* Remove -mold-gcc command-line option for x86 targets.
* Add -O[2|s] command-line options to x86 assembler to enable alternate
shorter instruction encoding.
* Add support for .nops directive. It is currently supported only for
x86 targets.
* Speed up direct linking with DLLs for Cygwin and Mingw targets.
* Add a configure option --enable-separate-code to decide whether
- z separate-code should be enabled in ELF linker by default. Default
to yes for Linux/x86 targets. Note that -z separate-code can increase
disk and memory size.
* Includes riscv-relax-size.patch, riscv-relax-relocatable.patch,
riscv-relax-versioned-hidden.patch and riscv-wrap-relax.patch
- Refresh enable-targets-gold.diff.
- Adjust cross-avr-omit_section_dynsym.patch.
- Remove binutils-2.30-branch.diff.
* Mon Jun 04 2018 schwab@suse.de
- riscv-relax-versioned-hidden.patch: RISC-V: Fix symbol address problem
with versioned symbols (PR ld/22756)
* Sat May 12 2018 afaerber@suse.de
- Restore riscv64-elf cross prefix via symlinks
* Tue Apr 03 2018 matz@suse.com
- Fix pacemaker libqb problem with section start/stop
symbols, aka PR21964. [bnc#1075418]
Adds binutils-fix-pr21964.diff .
(this is a change from SLE12, that was already included in 2.31
binutils tree, mentioned for completeness to not loose tracking)
* Thu Mar 22 2018 schwab@suse.de
- riscv-relax-relocatable.patch: RISC-V: Don't enable relaxation in
relocatable link
* Tue Mar 20 2018 rguenther@suse.com
- Update binutils-2.30-branch.diff: 2.30 branch @7c78c26eefbb8
* Includes more complete fix for PR20882.
* Includes fix for PR22836. [boo#1085784]
* Includes fix for PR22983.
* Thu Mar 08 2018 schwab@suse.de
- riscv-relax-size.patch: Fix symbol size bug when relaxation deletes bytes
* Tue Mar 06 2018 matz@suse.com
- Add binutils-pr22868.diff to fix testsuite fails in LLVM.
* Mon Feb 26 2018 schwab@suse.de
- Update to binutils 2.30
* Add --debug-dump=links option to readelf and --dwarf=links option to objdump
which displays the contents of any .gnu_debuglink or .gnu_debugaltlink
sections.
Add a --debug-dump=follow-links option to readelf and a --dwarf=follow-links
option to objdump which causes indirect links into separate debug info files
to be followed when dumping other DWARF sections.
* Add support for loaction views in DWARF debug line information.
* Add -z separate-code to generate separate code PT_LOAD segment.
* Add "-z undefs" command line option as the inverse of the "-z defs" option.
* Add -z globalaudit command line option to force audit libraries to be run
for every dynamic object loaded by an executable - provided that the loader
supports this functionality.
* Tighten linker script grammar around file name specifiers to prevent the use
of SORT_BY_ALIGNMENT and SORT_BY_INIT_PRIORITY on filenames. These would
previously be accepted but had no effect.
* The EXCLUDE_FILE directive can now be placed within any SORT_* directive
within input section lists.
- binutils-2.30-branch.diff: 2.30 branch @4cd0043413
- riscv-wrap-relax.patch: Fix linker relaxation with --wrap
- Remove use-hashtype-both-by-default.diff, use
- -enable-default-hash-style=both instead
- Remove binutils-2.29-branch.diff, s390x-8fe09d7.diff
- Use riscv64-suse-linux as target for cross-riscv64-binutils
* Fri Jan 26 2018 dimstar@opensuse.org
- Drop bc BuildRequires: no longer needed.
* Mon Jan 22 2018 schwab@suse.de
- Add riscv64 to %target_list
* Wed Jan 17 2018 afaerber@suse.de
- Add arm-none-eabi symlinks (bsc#1074741)
* Mon Oct 02 2017 matz@suse.com
- Add s390x-8fe09d7.diff to fix typo in ELF notes.
* Fri Sep 29 2017 mliska@suse.cz
- Update binutils-2.29-branch.diff to @a45d8fd5ffbf888 fixing PR 22220.
* Thu Sep 28 2017 rguenther@suse.com
- Update to 2.29.1 release, accumulating bugfixes.
- Update binutils-2.29-branch.diff to @a38a1d80 and to be
relative to the 2.29.1 release fixing following PRs/bnc/CVE:
22058 [bnc#1057149, CVE-2017-14130]
21813 [bnc#1052503, CVE-2017-12456, bnc#1052507, CVE-2017-12454,
bnc#1052509, CVE-2017-12453, bnc#1052511, CVE-2017-12452,
bnc#1052514, CVE-2017-12450, bnc#1052503, CVE-2017-12456,
bnc#1052507, CVE-2017-12454, bnc#1052509, CVE-2017-12453,
bnc#1052511, CVE-2017-12452, bnc#1052514, CVE-2017-12450]
22148 [bnc#1060599, CVE-2017-14745]
22163 [bnc#1061241, CVE-2017-14974]
21933 [bnc#1053347, CVE-2017-12799]
21787 [bnc#1052518, CVE-2017-12448]
22018 [bnc#1056312, CVE-2017-13757]
22170 [bnc#1060621, CVE-2017-14729]
22047 [bnc#1057144, CVE-2017-14129]
22059 [bnc#1057139, CVE-2017-14128]
21990 [bnc#1058480, CVE-2017-14333]
22113 [bnc#1059050, CVE-2017-14529]
as well as these PRs:
22061, 21786, 21916, 21994, 22064, 21995, 21909, 21441, 22060,
22067, 22032, 21820, 22048, 22199, 21781, 21824, 21861, 22150.
* Wed Aug 30 2017 matz@suse.com
- Update to 2.29 (@5d25156), upstream fix for PR21884, as
well as PRs 18808 18841 21840 21988 21910 21962 21964.
* Fri Aug 11 2017 matz@suse.com
- Last fixes for PR21884 weren't complete, adjust
binutils-2.29-branch.diff some more for this.
* Thu Aug 10 2017 matz@suse.com
- Update to 2.29 branch (@de44148c), fixing PR21884, a segfault
in ld while building memtest86+ .
Changes binutils-2.29-branch.diff.
* Mon Jul 31 2017 matz@suse.com
- Update to 2.29 branch, fixing PR21847, affecting the ppc64le
ABI in corner cases since 2.29 release.
Adds binutils-2.29-branch.diff.
- Remove binutils-2.29-gold-mips.patch, obsolete by the update.
* Wed Jul 26 2017 rguenther@suse.com
- Add binutils-2.29-gold-mips.patch to fix build on SLE-11.
* Wed Jul 26 2017 rguenther@suse.com
- Update to binutils 2.29. [fate#321454, fate#321494, fate#323293]
- Fixes these security-related PRs/bnc/CVEs:
18750 [bsc#1030296, CVE-2014-9939]
20891 [bsc#1030585, CVE-2017-7225]
20892 [bsc#1030588, CVE-2017-7224]
20898 [bsc#1030589, CVE-2017-7223]
20905 [bsc#1030584, CVE-2017-7226]
20908 [bsc#1031644, CVE-2017-7299]
20909 [bsc#1031656, CVE-2017-7300]
20921 [bsc#1031595, CVE-2017-7302]
20922 [bsc#1031593, CVE-2017-7303]
20924 [bsc#1031638, CVE-2017-7301]
20931 [bsc#1031590, CVE-2017-7304]
21409 [bsc#1037052, CVE-2017-8392]
21412 [bsc#1037057, CVE-2017-8393]
21414 [bsc#1037061, CVE-2017-8394]
21432 [bsc#1037066, CVE-2017-8396]
21440 [bsc#1037273, CVE-2017-8421]
21580 [bsc#1044891, CVE-2017-9746]
21581 [bsc#1044897, CVE-2017-9747]
21582 [bsc#1044901, CVE-2017-9748]
21587 [bsc#1044909, CVE-2017-9750]
21594 [bsc#1044925, CVE-2017-9755]
21595 [bsc#1044927, CVE-2017-9756]
- Feature changes:
* The MIPS port now supports microMIPS eXtended Physical Addressing (XPA)
instructions for assembly and disassembly.
* The MIPS port now supports the microMIPS Release 5 ISA for assembly and
disassembly.
* The MIPS port now supports the Imagination interAptiv MR2 processor,
which implements the MIPS32r3 ISA, the MIPS16e2 ASE as well as a couple
of implementation-specific regular MIPS and MIPS16e2 ASE instructions.
* The SPARC port now supports the SPARC M8 processor, which implements the
Oracle SPARC Architecture 2017.
* The MIPS port now supports the MIPS16e2 ASE for assembly and disassembly.
* Add support for ELF SHF_GNU_MBIND and PT_GNU_MBIND_XXX.
* Add support for the wasm32 ELF conversion of the WebAssembly file format.
* Add --inlines option to objdump, which extends the --line-numbers option
so that inlined functions will display their nesting information.
* Add --merge-notes options to objcopy to reduce the size of notes in
a binary file by merging and deleting redundant notes.
* Add support for locating separate debug info files using the build-id
method, where the separate file has a name based upon the build-id of
the original file.
GAS
* Add support for ELF SHF_GNU_MBIND.
* Add support for the WebAssembly file format and wasm32 ELF conversion.
* PowerPC gas now checks that the correct register class is used in
instructions. For instance, "addi %f4,%cr3,%r31" warns three times
that the registers are invalid.
* Add support for the Texas Instruments PRU processor.
* Support for the ARMv8-R architecture and Cortex-R52 processor has been
added to the ARM port.
GNU ld
* Support for -z shstk in the x86 ELF linker to generate
GNU_PROPERTY_X86_FEATURE_1_SHSTK in ELF GNU program properties.
* Add support for GNU_PROPERTY_X86_FEATURE_1_SHSTK in ELF GNU program
properties in the x86 ELF linker.
* Add support for GNU_PROPERTY_X86_FEATURE_1_IBT in ELF GNU program
properties in the x86 ELF linker.
* Support for -z ibtplt in the x86 ELF linker to generate IBT-enabled
PLT.
* Support for -z ibt in the x86 ELF linker to generate IBT-enabled
PLT as well as GNU_PROPERTY_X86_FEATURE_1_IBT in ELF GNU program
properties.
* Add support for ELF SHF_GNU_MBIND and PT_GNU_MBIND_XXX.
* Add support for ELF GNU program properties.
* Add support for the Texas Instruments PRU processor.
* When configuring for arc*-*-linux* targets the default linker emulation will
change if --with-cpu=nps400 is used at configure time.
* Improve assignment of LMAs to orphan sections in some edge cases where a
mixture of both AT>LMA_REGION and AT(LMA) are used.
* Orphan sections placed after an empty section that has an AT(LMA) will now
take an load memory address starting from LMA.
* Section groups can now be resolved (the group deleted and the group members
placed like normal sections) at partial link time either using the new
linker option --force-group-allocation or by placing FORCE_GROUP_ALLOCATION
into the linker script.
- Includes binutils-bso21193.diff, binutils-bso21333.diff and
fix-security-bugs.diff.
- Remove ld-dtags.diff, instead configure with --enable-new-dtags.
- Refresh binutils-build-as-needed.diff.
- Remove binutils-2.28-branch.diff.
* Wed Apr 05 2017 afaerber@suse.de
- Add riscv64 target, tested with gcc7 and downstream newlib 2.4.0
* Prepare riscv32 target (gh#riscv/riscv-newlib#8)
* Fri Mar 31 2017 rguenther@suse.com
- Update binutils-2.28-branch.diff.
- Make compressed debug section handling explicit, disable for
old products and enable for gas on all architectures otherwise.
- Add binutils-bso21333.diff. [boo#1029995]
* Thu Mar 30 2017 rguenther@suse.com
- Remove empty rpath component removal optimization from
binutils-skip-rpaths.patch to workaround CMake rpath handling.
[boo#1025282]
* Fri Mar 17 2017 matz@suse.com
- Add fix-security-bugs.diff to fix bnc#1029907, bnc#1029908,
bnc#1029909 and more. Upstream bugs fixed:
PR 21135 [bsc#1030298, CVE-2017-7209],
PR 21137 [bsc#1029909, CVE-2017-6965],
PR 21139 [bsc#1029908, CVE-2017-6966],
PR 21156 [bsc#1029907, CVE-2017-6969],
PR 21157 [bsc#1030297, CVE-2017-7210],
PR 21147, PR 21148, PR 21149, PR 21150, PR 21151, PR 21155,
PR 21158, PR 21159
* Wed Mar 08 2017 rguenther@suse.com
- Update to binutils 2.28.
* Add support for locating separate debug info files using the build-id
method, where the separate file has a name based upon the build-id of
the original file.
* This version of binutils fixes a problem with PowerPC VLE 16A and 16D
relocations which were functionally swapped, for example,
R_PPC_VLE_HA16A performed like R_PPC_VLE_HA16D while R_PPC_VLE_HA16D
performed like R_PPC_VLE_HA16A. This could have been fixed by
renumbering relocations, which would keep object files created by an
older version of gas compatible with a newer ld. However, that would
require an ABI update, affecting other assemblers and linkers that
create and process the relocations correctly. It is recommended that
all VLE object files be recompiled, but ld can modify the relocations
if --vle-reloc-fixup is passed to ld. If the new ld command line
option is not used, ld will ld warn on finding relocations inconsistent
with the instructions being relocated.
* The nm program has a new command line option (--with-version-strings)
which will display a symbol's version information, if any, after the
symbol's name.
* The ARC port of objdump now accepts a -M option to specify the extra
instruction class(es) that should be disassembled.
* The --remove-section option for objcopy and strip now accepts section
patterns starting with an exclamation point to indicate a non-matching
section. A non-matching section is removed from the set of sections
matched by an earlier --remove-section pattern.
* The --only-section option for objcopy now accepts section patterns
starting with an exclamation point to indicate a non-matching section.
A non-matching section is removed from the set of sections matched by
an earlier --only-section pattern.
* New --remove-relocations=SECTIONPATTERN option for objcopy and strip.
This option can be used to remove sections containing relocations.
The SECTIONPATTERN is the section to which the relocations apply, not
the relocation section itself.
GAS
* Add support for the RISC-V architecture.
* Add support for the ARM Cortex-M23 and Cortex-M33 processors.
GNU ld
* The EXCLUDE_FILE linker script construct can now be applied outside of the
section list in order for the exclusions to apply over all input sections
in the list.
* Add support for the RISC-V architecture.
* The command line option --no-eh-frame-hdr can now be used in ELF based
linkers to disable the automatic generation of .eh_frame_hdr sections.
* Add --in-implib=<infile> to the ARM linker to enable specifying a set of
Secure Gateway veneers that must exist in the output import library
specified by --out-implib=<outfile> and the address they must have.
As such, --in-implib is only supported in combination with --cmse-implib.
* Extended the --out-implib=<file> option, previously restricted to x86 PE
targets, to any ELF based target. This allows the generation of an import
library for an ELF executable, which can then be used by another application
to link against the executable.
GOLD
* Add -z bndplt option (x86-64 only) to support Intel MPX.
* Add --orphan-handling option.
* Add --stub-group-multi option (PowerPC only).
* Add --target1-rel, --target1-abs, --target2 options (Arm only).
* Add -z stack-size option.
* Add --be8 option (Arm only).
* Add HIDDEN support in linker scripts.
* Add SORT_BY_INIT_PRIORITY support in linker scripts.
- Add binutils-2.28-branch.diff.
- Remove binutils-2.27-branch.diff
- Remove binutils-2.27-fix-section-order.diff,
refine_.cfi_sections_check_to_only_consider_compact_eh_frame.patch
and aarch64-alignment-frags.patch now upstream.
* Mon Mar 06 2017 schwab@linux-m68k.org
- Configure with --with-system-zlib
* Fri Feb 24 2017 rguenther@suse.com
- Add binutils-bso21193.diff to fix section alignment on
.gnu_debuglink. [bso#21193]
* Tue Feb 07 2017 rguenther@suse.com
- Add s390x to gold_archs.
* Mon Feb 06 2017 afaerber@suse.de
- Fix alignment frags for aarch64 (boo#1003846)
aarch64-alignment-frags.patch
* Sun Dec 18 2016 jengelh@inai.de
- Call ldconfig for libbfd
* Wed Nov 30 2016 idonmez@suse.com
- Add refine_.cfi_sections_check_to_only_consider_compact_eh_frame.patch
from upstream to fix an assembler problem with clang on ARM.
Fixes https://sourceware.org/bugzilla/show_bug.cgi?id=20648
* Mon Nov 28 2016 rguenther@suse.com
- Update binutils-2.27-branch.diff to include recent fixes from the branch.
- Add binutils-2.27-fix-section-order.diff to restore monotonically
increasing section offsets.
* Tue Oct 04 2016 stefan.bruens@rwth-aachen.de
- Remove qemu workaround from spec file, since qemu 2.5.0rc0 the
length of the argument list is no longer limited to 128 kByte.
* Wed Aug 24 2016 rguenther@suse.com
- Update to binutils 2.27.
* Add a configure option, --enable-64-bit-archive, to force use of a
64-bit format when creating an archive symbol index.
* Add --elf-stt-common= option to objcopy for ELF targets to control
whether to convert common symbols to the STT_COMMON type.
GAS:
* Default to --enable-compressed-debug-sections=gas for Linux/x86 targets.
* Add --no-pad-sections to stop the assembler from padding the end of output
sections up to their alignment boundary.
* Support for the ARMv8-M architecture has been added to the ARM port.
Support for the ARMv8-M Security and DSP Extensions has also been added
to the ARM port.
* ARC backend accepts .extInstruction, .extCondCode, .extAuxRegister, and
.extCoreRegister pseudo-ops that allow an user to define custom
instructions, conditional codes, auxiliary and core registers.
* Add a configure option --enable-elf-stt-common to decide whether ELF
assembler should generate common symbols with the STT_COMMON type by
default. Default to no.
* New command line option --elf-stt-common= for ELF targets to control
whether to generate common symbols with the STT_COMMON type.
* Add ability to set section flags and types via numeric values for ELF
based targets.
* Add a configure option --enable-x86-relax-relocations to decide whether
x86 assembler should generate relax relocations by default. Default to
yes, except for x86 Solaris targets older than Solaris 12.
* New command line option -mrelax-relocations= for x86 target to control
whether to generate relax relocations.
* New command line option -mfence-as-lock-add=yes for x86 target to encode
lfence, mfence and sfence as "lock addl $0x0, (%[re]sp)".
* Add assembly-time relaxation option for ARC cpus.
* Add --with-cpu=TYPE configure option for ARC gas. This allows the default
cpu type to be adjusted at configure time.
GOLD:
* Add a configure option --enable-relro to decide whether -z relro should
be enabled by default. Default to yes.
* Add support for s390, MIPS, AArch64, and TILE-Gx architectures.
* Add support for STT_GNU_IFUNC symbols.
* Add support for incremental linking (--incremental).
GNU ld:
* Add a configure option --enable-relro to decide whether -z relro should
be enabled in ELF linker by default. Default to yes for all Linux
targets except FRV, HPPA, IA64 and MIPS.
* Support for -z noreloc-overflow in the x86-64 ELF linker to disable
relocation overflow check.
* Add -z common/-z nocommon options for ELF targets to control whether to
convert common symbols to the STT_COMMON type during a relocatable link.
* Support for -z nodynamic-undefined-weak in the x86 ELF linker, which
avoids dynamic relocations against undefined weak symbols in executable.
* The NOCROSSREFSTO command was added to the linker script language.
* Add --no-apply-dynamic-relocs to the AArch64 linker to do not apply
link-time values for dynamic relocations.
- Add binutils-2.27-branch.diff with fixes on the branch sofar.
- Remove gold-relocate-tls.patch, included in binutils 2.27.
* Wed Jul 06 2016 rguenther@suse.com
- Update to binutils 2.26.1.
- Remove binutils-2.26-branch.diff.
* Fri Mar 18 2016 rguenther@suse.com
- Update binutils-2.26-branch.diff, updates to branch head.
(swo#19807) (bnc#970239)
- Disable -mrelax-relocations by default on old products.
* Wed Mar 09 2016 rguenther@suse.com
- Update binutils-2.26-branch.diff, updates to branch head.
(swo#19739) (swo#19775)
* Mon Feb 29 2016 rguenther@suse.com
- Add binutils-2.26-branch.diff, updates to branch head.
* Adds -mrelax-relocations on x86
* Fixes bso#19698
* Mon Feb 01 2016 rguenther@suse.com
- Refresh cross-avr-nesc-as.patch
* Wed Jan 27 2016 rguenther@suse.com
- Update to binutils 2.26
* Add --fix-stm32l4xx-629360 to the ARM linker to enable a link-time
workaround for a bug in the bus matrix / memory controller for some of
the STM32 Cortex-M4 based products (STM32L4xx)
* Add a configure option --enable-compressed-debug-sections={all,ld} to
decide whether DWARF debug sections should be compressed by default.
* Add support for the ARC EM/HS, and ARC600/700 architectures.
* Experimental support for linker garbage collection (--gc-sections)
has been enabled for COFF and PE based targets.
* New command line option for ELF targets to compress DWARF debug
sections, --compress-debug-sections=[none|zlib|zlib-gnu|zlib-gabi].
* New command line option, --orphan-handling=[place|warn|error|discard], to
adjust how orphan sections are handled. The default is 'place' which gives
the current behaviour, 'warn' and 'error' issue a warning or error
respectively when orphan sections are found, and 'discard' will discard all
orphan sections.
* Add support for LLVM plugin.
* Add --print-memory-usage option to report memory blocks usage.
* Add --require-defined option, it's like --undefined except the new symbol
must be defined by the end of the link.
* Add a configure option --enable-compressed-debug-sections={all,gas} to
decide whether DWARF debug sections should be compressed by default.
* Add support for the ARC EM/HS, and ARC600/700 architectures. Remove
assembler support for Argonaut RISC architectures.
* Add option to objcopy to insert new symbols into a file:
- -add-symbol <name>=[<section>:]<value>[,<flags>]
* Add support for the ARC EM/HS, and ARC600/700 architectures.
* Extend objcopy --compress-debug-sections option to support
- -compress-debug-sections=[none|zlib|zlib-gnu|zlib-gabi] for ELF
targets.
* Add --update-section option to objcopy.
* Add --output-separator option to strings.
- Includes z13 support, remove 0001-S-390-Add-support-for-IBM-z13.patch,
0002-S-390-Add-check-for-length-field-operand.patch,
0003-S-390-Add-more-IBM-z13-instructions.patch,
0004-S-390-Fixes-for-z13-instructions.patch and
0005-S-390-z13-use-GNU-attribute-to-indicate-vector-ABI.patch
- Includes fixes in binutils-fix--dynamic-list.patch,
binutils-fix-gold-aarch64.diff, gold-arm64-abi-pagesize.patch
and s390-troo-insn-type.patch
- Refresh s390-pic-dso.diff and binutils-build-as-needed.diff
* Wed Jan 13 2016 schwab@suse.de
- gold-relocate-tls.patch: Fix internal error when applying TLSDESC
relocations with no TLS segment
* Wed Oct 14 2015 schwab@suse.de
- s390-troo-insn-type.patch: fix wrong insn type for troo insn
- aarch64-common-pagesize.patch: change default common-page-size to 64K on
aarch64
* Thu Oct 01 2015 schwab@suse.de
- gold-arm64-abi-pagesize.patch: fix ABI pagesize for aarch64 in gold
* Tue Jul 21 2015 matz@suse.de
- Disable use-hashtype-both-by-default.diff for
the mips target, it's incompatible with it. [bnc #938658]
* Mon Jul 13 2015 afaerber@suse.de
- Add cross-rx-binutils package for Renesas RX
* Fri Jul 10 2015 schwab@linux-m68k.org
- Work around qemu bug
* Thu Jul 09 2015 matz@suse.de
- Update to 2.25 branch at 2f5b97b4f (changes
binutils-2.25-branch.diff.gz) fixes PR 18481, gas/18541.
- Add patches for s390 z13 support (backports from
to-be 2.26):
0001-S-390-Add-support-for-IBM-z13.patch
0002-S-390-Add-check-for-length-field-operand.patch
0003-S-390-Add-more-IBM-z13-instructions.patch
0004-S-390-Fixes-for-z13-instructions.patch
0005-S-390-z13-use-GNU-attribute-to-indicate-vector-ABI.patch .
* Tue Jul 07 2015 afaerber@suse.de
- Fix %TARGET vs. $TARGET_OS inconsistencies by turning $TARGET_OS
into %TARGET_OS for reuse in install and file sections.
This fixes the assumption that $TARGET_OS will match %{TARGET}*.
* Wed Jun 10 2015 dmueller@suse.com
- enable gold for aarch64
* Mon May 18 2015 matz@suse.de
- Move sed call from %prep to %build to not disturb quilt.
- Add binutils-2.25-branch.diff.gz:
Update to 2.25 branch at 8fe8994c, fixing many bugs:
PR ld/15228, binutils/17512, 17165, binutils/17531, ld/17615, 17666,
ld/17709, gas/17753, 17755, 17817, ld/17827, 17842, binutils/17926,
17954, 18010, ld/18167, ld/18222, ld/18270.
- Remove eh-frame-hdr-on-shared-lib-bfd.patch: Included already.
- Remove gold-opd-visibility.patch: Included already.
* Mon May 18 2015 meissner@suse.com
- move info deinstall to preun section
* Sat May 16 2015 hrvoje.senjan@gmail.com
- Added binutils-fix--dynamic-list.patch:
Fixes https://sourceware.org/bugzilla/show_bug.cgi?id=13577 and
https://sourceware.org/bugzilla/show_bug.cgi?id=16992
* Thu Feb 19 2015 schwab@suse.de
- gold-opd-visibility.patch: Set default visibility on discarded .opd
symbols
* Wed Jan 21 2015 schwab@suse.de
- eh-frame-hdr-on-shared-lib-bfd.patch: Don't create .eh_frame_hdr on
shared lib bfd, fixes building libgcj on ppc64
* Thu Jan 15 2015 rguenther@suse.com
- Update to binutils 2.25 release.
* Add --data option to strings to only print strings in loadable, initialized
data sections. Change the default behaviour to be --all, but add a new
configure time option of --disable-default-strings-all to restore the old
default behaviour.
* Add --include-all-whitespace to strings.
* Add --dump-section option to objcopy.
* Add support for the Andes NDS32.
* PE binaries now once again contain real timestamps by default. To disable
the inclusion of a timestamp in a PE binary, use the --no-insert-timestamp
command line option.
* Replace support for openrisc and or32 with support for or1k.
* Add support for the --build-id command line option to COFF based targets.
* x86/x86_64 pe-coff now supports the --build-id option.
* Add support for the AVR Tiny microcontrollers.
* Enhanced the ARM port to accept the assembler output from the CodeComposer
Studio tool. Support is enabled via the new command line option -mccs.
- Update to 2.25 branch head.
* Pulls PIE fixes.
* Mon Jan 12 2015 dimstar@opensuse.org
- Minor fix on the usage of update-alternatives
https://en.opensuse.org/openSUSE:Packaging_Multiple_Version_guidelines
* Mon Dec 01 2014 matz@suse.de
- Update to current 2.25 pre-release branch, at 127a4644.
- binutils-fix-gold-aarch64.diff: fixing build temporarily broken
on brach.
- Remove obsolete patches: binutils-2.24-branch.diff.gz,
pie-m68k.patch, binutils-2.24-auto-plugin.diff, ld-testsuite.patch,
binutils-2.24-bso16746.diff .
* Fri Oct 31 2014 afaerber@suse.de
- Enable Adapteva Epiphany target
/usr/bin/i586-suse-linux-addr2line /usr/bin/i586-suse-linux-ar /usr/bin/i586-suse-linux-as /usr/bin/i586-suse-linux-elfedit /usr/bin/i586-suse-linux-gprof /usr/bin/i586-suse-linux-ld /usr/bin/i586-suse-linux-ld.bfd /usr/bin/i586-suse-linux-nm /usr/bin/i586-suse-linux-objcopy /usr/bin/i586-suse-linux-objdump /usr/bin/i586-suse-linux-ranlib /usr/bin/i586-suse-linux-readelf /usr/bin/i586-suse-linux-size /usr/bin/i586-suse-linux-strings /usr/bin/i586-suse-linux-strip /usr/i586-suse-linux /usr/i586-suse-linux/bin /usr/i586-suse-linux/bin/ar /usr/i586-suse-linux/bin/as /usr/i586-suse-linux/bin/ld /usr/i586-suse-linux/bin/ld.bfd /usr/i586-suse-linux/bin/nm /usr/i586-suse-linux/bin/objcopy /usr/i586-suse-linux/bin/objdump /usr/i586-suse-linux/bin/ranlib /usr/i586-suse-linux/bin/readelf /usr/i586-suse-linux/bin/strip /usr/i586-suse-linux/lib /usr/i586-suse-linux/lib/ldscripts /usr/i586-suse-linux/lib/ldscripts/elf32_x86_64.x /usr/i586-suse-linux/lib/ldscripts/elf32_x86_64.xbn /usr/i586-suse-linux/lib/ldscripts/elf32_x86_64.xc /usr/i586-suse-linux/lib/ldscripts/elf32_x86_64.xce /usr/i586-suse-linux/lib/ldscripts/elf32_x86_64.xd /usr/i586-suse-linux/lib/ldscripts/elf32_x86_64.xdc /usr/i586-suse-linux/lib/ldscripts/elf32_x86_64.xdce /usr/i586-suse-linux/lib/ldscripts/elf32_x86_64.xde /usr/i586-suse-linux/lib/ldscripts/elf32_x86_64.xdw /usr/i586-suse-linux/lib/ldscripts/elf32_x86_64.xdwe /usr/i586-suse-linux/lib/ldscripts/elf32_x86_64.xe /usr/i586-suse-linux/lib/ldscripts/elf32_x86_64.xn /usr/i586-suse-linux/lib/ldscripts/elf32_x86_64.xr /usr/i586-suse-linux/lib/ldscripts/elf32_x86_64.xs /usr/i586-suse-linux/lib/ldscripts/elf32_x86_64.xsc /usr/i586-suse-linux/lib/ldscripts/elf32_x86_64.xsce /usr/i586-suse-linux/lib/ldscripts/elf32_x86_64.xse /usr/i586-suse-linux/lib/ldscripts/elf32_x86_64.xsw /usr/i586-suse-linux/lib/ldscripts/elf32_x86_64.xswe /usr/i586-suse-linux/lib/ldscripts/elf32_x86_64.xu /usr/i586-suse-linux/lib/ldscripts/elf32_x86_64.xw /usr/i586-suse-linux/lib/ldscripts/elf32_x86_64.xwe /usr/i586-suse-linux/lib/ldscripts/elf_i386.x /usr/i586-suse-linux/lib/ldscripts/elf_i386.xbn /usr/i586-suse-linux/lib/ldscripts/elf_i386.xc /usr/i586-suse-linux/lib/ldscripts/elf_i386.xce /usr/i586-suse-linux/lib/ldscripts/elf_i386.xd /usr/i586-suse-linux/lib/ldscripts/elf_i386.xdc /usr/i586-suse-linux/lib/ldscripts/elf_i386.xdce /usr/i586-suse-linux/lib/ldscripts/elf_i386.xde /usr/i586-suse-linux/lib/ldscripts/elf_i386.xdw /usr/i586-suse-linux/lib/ldscripts/elf_i386.xdwe /usr/i586-suse-linux/lib/ldscripts/elf_i386.xe /usr/i586-suse-linux/lib/ldscripts/elf_i386.xn /usr/i586-suse-linux/lib/ldscripts/elf_i386.xr /usr/i586-suse-linux/lib/ldscripts/elf_i386.xs /usr/i586-suse-linux/lib/ldscripts/elf_i386.xsc /usr/i586-suse-linux/lib/ldscripts/elf_i386.xsce /usr/i586-suse-linux/lib/ldscripts/elf_i386.xse /usr/i586-suse-linux/lib/ldscripts/elf_i386.xsw /usr/i586-suse-linux/lib/ldscripts/elf_i386.xswe /usr/i586-suse-linux/lib/ldscripts/elf_i386.xu /usr/i586-suse-linux/lib/ldscripts/elf_i386.xw /usr/i586-suse-linux/lib/ldscripts/elf_i386.xwe /usr/i586-suse-linux/lib/ldscripts/elf_iamcu.x /usr/i586-suse-linux/lib/ldscripts/elf_iamcu.xbn /usr/i586-suse-linux/lib/ldscripts/elf_iamcu.xc /usr/i586-suse-linux/lib/ldscripts/elf_iamcu.xce /usr/i586-suse-linux/lib/ldscripts/elf_iamcu.xd /usr/i586-suse-linux/lib/ldscripts/elf_iamcu.xdc /usr/i586-suse-linux/lib/ldscripts/elf_iamcu.xdce /usr/i586-suse-linux/lib/ldscripts/elf_iamcu.xde /usr/i586-suse-linux/lib/ldscripts/elf_iamcu.xdw /usr/i586-suse-linux/lib/ldscripts/elf_iamcu.xdwe /usr/i586-suse-linux/lib/ldscripts/elf_iamcu.xe /usr/i586-suse-linux/lib/ldscripts/elf_iamcu.xn /usr/i586-suse-linux/lib/ldscripts/elf_iamcu.xr /usr/i586-suse-linux/lib/ldscripts/elf_iamcu.xs /usr/i586-suse-linux/lib/ldscripts/elf_iamcu.xsc /usr/i586-suse-linux/lib/ldscripts/elf_iamcu.xsce /usr/i586-suse-linux/lib/ldscripts/elf_iamcu.xse /usr/i586-suse-linux/lib/ldscripts/elf_iamcu.xsw /usr/i586-suse-linux/lib/ldscripts/elf_iamcu.xswe /usr/i586-suse-linux/lib/ldscripts/elf_iamcu.xu /usr/i586-suse-linux/lib/ldscripts/elf_iamcu.xw /usr/i586-suse-linux/lib/ldscripts/elf_iamcu.xwe /usr/i586-suse-linux/lib/ldscripts/elf_x86_64.x /usr/i586-suse-linux/lib/ldscripts/elf_x86_64.xbn /usr/i586-suse-linux/lib/ldscripts/elf_x86_64.xc /usr/i586-suse-linux/lib/ldscripts/elf_x86_64.xce /usr/i586-suse-linux/lib/ldscripts/elf_x86_64.xd /usr/i586-suse-linux/lib/ldscripts/elf_x86_64.xdc /usr/i586-suse-linux/lib/ldscripts/elf_x86_64.xdce /usr/i586-suse-linux/lib/ldscripts/elf_x86_64.xde /usr/i586-suse-linux/lib/ldscripts/elf_x86_64.xdw /usr/i586-suse-linux/lib/ldscripts/elf_x86_64.xdwe /usr/i586-suse-linux/lib/ldscripts/elf_x86_64.xe /usr/i586-suse-linux/lib/ldscripts/elf_x86_64.xn /usr/i586-suse-linux/lib/ldscripts/elf_x86_64.xr /usr/i586-suse-linux/lib/ldscripts/elf_x86_64.xs /usr/i586-suse-linux/lib/ldscripts/elf_x86_64.xsc /usr/i586-suse-linux/lib/ldscripts/elf_x86_64.xsce /usr/i586-suse-linux/lib/ldscripts/elf_x86_64.xse /usr/i586-suse-linux/lib/ldscripts/elf_x86_64.xsw /usr/i586-suse-linux/lib/ldscripts/elf_x86_64.xswe /usr/i586-suse-linux/lib/ldscripts/elf_x86_64.xu /usr/i586-suse-linux/lib/ldscripts/elf_x86_64.xw /usr/i586-suse-linux/lib/ldscripts/elf_x86_64.xwe
Generated by rpm2html 1.8.1
Fabrice Bellet, Tue Jul 9 18:42:22 2024