| Index | index by Group | index by Distribution | index by Vendor | index by creation date | index by Name | Mirrors | Help | Search |
| Name: mkvtoolnix-tools | Distribution: openSUSE Tumbleweed |
| Version: 88.0 | Vendor: openSUSE |
| Release: 1.1 | Build date: Thu Nov 14 10:07:53 2024 |
| Group: Unspecified | Build host: reproducible |
| Size: 20702136 | Source RPM: mkvtoolnix-88.0-1.1.src.rpm |
| Packager: http://bugs.opensuse.org | |
| Url: http://bunkus.org/videotools/mkvtoolnix/ | |
| Summary: Additional command line tools for mkv files | |
This package contains extra command line tools for mkv diagnostic.
GPL-2.0-or-later
* Thu Nov 14 2024 Luigi Baldoni <aloisio@gmx.com>
- Update to version 88.0
New features and enhancements
* mkvmerge, MKVToolNix GUI's chapter editor: added support for
reading chapters from PotPlayer bookmark files.
Bug fixes:
* configure: fixed setting `HAVE_QTDBUS` properly if the
QtDbus module is found. Fixes #3744.
* mkvmerge: MP4 reader: mkvmerge will no longer warn when
multiple identical FourCCs are present within the same track
headers.
* mkvmerge man page: removed the wrong statement that an
attachment's MIME type must be set before use of the
`--attach-file` & `--attach-file-once` options. If not given,
mkvmerge auto-detects the MIME type.
* Sat Sep 07 2024 Luigi Baldoni <aloisio@gmx.com>
- Update to version 87.0
New features and enhancements:
* mkvmerge: chapters: added support for specifying MPLS files
with `--chapters`, too, not just as regular source files.
The documentation stated this was possible already, but that
wasn't actually the case.
* MKVToolNix GUI: multiplexer: added a progress dialog that is
shown during file identification.
* MKVToolNix GUI: jobs: the status bar now differentiates
between numbers of warnings/errors that occurred in the
current session and those that occurred before the current
session.
Bug fixes:
* mkvmerge: AAC parser: LOAS/LATM streams: if the first
`AudioSpecificConfig`
element is not found within the first LOAS/LATM frame,
`mkvmerge` will no longer discard the frames before it but
defer parsing them until after it has found the
`AudioSpecificConfig` element.
* MKVToolNix GUI: job queue: fixed the GUI crashing when
re-ordering the jobs in the job queue.
Build system changes:
* The bundled `fmt` library was updated to v10.2.1.
* Sat Jul 13 2024 Luigi Baldoni <aloisio@gmx.com>
- Update to version 86.0
New features and enhancements:
* mkvmerge: Matroska reader: track statistics tags are
included in the JSON identification output just like other
tags had already been included: as part of the track
properties, prefixed with `tag_`.
* mkvmerge: MPEG TS reader: mkvmerge will now detect teletext
subtitle tracks even if they're not listed in the PMT as
long as it can find teletext pages flagged as subtitles in
the header within the probed ranged of the file.
* MKVToolNix GUI: multiplexer: the default mode for escaping
the arguments in the "Show command line" dialog can now be
set in the preferences.
* MKVToolNix GUI: multiplexer: the "Show command line" dialog
now includes the command lines for all currently open
multiplex settings, switchable with a combo box.
* MKVToolNix GUI: multiplexer: some users add the option
`--regenerate-track-uids` to the "additional options", even
though `--regenerate-track-uids` is a file-specific option,
and you can only use global options in the "additional
options". However, the GUI currently doesn't have an option
for specifying additional file-specific options. The GUI now
detects the use of this option in the "additional options" &
adds it for each of the source files instead.
* MKVToolNix GUI: multiplexer: the option
`--regenerate-track-uids` has been added to the "additional
command line options" dialog.
* translations: added a Norwegian Bokmål translation of the
man pages.
Bug fixes:
* mkvmerge: when using timestamp files for subtitle tracks,
mkvmerge will no longer set a default duration for the track.
* mkvmerge: when using timestamp files for subtitle tracks,
mkvmerge will no longer queue frames longer than necessary,
which resulted in the frames sometimes being written much
later than they should have been according to their
timestamps.
* mkvmerge: when using timestamp files for subtitle tracks,
mkvmerge will now write the packets' duration properly.
* MKVToolNix GUI: job queue: the shortcut from the "Job queue"
menu are now enabled correctly whenever the number of jobs in
the queue changes (e.g. by adding new jobs).
* Sun Jun 02 2024 Luigi Baldoni <aloisio@gmx.com>
- Update to version 85.0
Bug fixes:
* fixed compilation of `src/common/sorting.h` with certain
compilers due to the deprecation & removal of
`std::result_of<>` in C++20.
* fixed compilation with the `gtest` library when `gtest`
requires additional libraries by querying `pkg-config`
for the correct flags & libraries to build with.
* MKVToolNix GUI: multiplexer: restored the keyboard shortcut
for switching to the "Attachments" tab (Alt+C for the
English interface).
* MKVToolNix GUI: multiplexer: fixed several cases when the
keyboard shortcuts for copying the first source file's
name/the destination file's name to the title (Ctrl+F &
Ctrl+D) and the one for copying the title to the destination
file name (Ctrl+T) were not enabled.
* Sun Apr 28 2024 Luigi Baldoni <aloisio@gmx.com>
- Update to version 84.0
New features and enhancements:
* mkvmerge: added a new file-specific option
`--regenerate-track-uids`. When used for Matroska files,
`mkvmerge` will generate new random track UIDs instead of
keeping existing track UIDs. This is done automatically when
a Matroska file was created by MakeMKV.
* mkvmerge: MP4 reader: added support for FLAC in MP4.
* MKVToolNix GUI: multiplexer: the "Attachments" tab's title
will now include the total number of attachments (both from
source files & to newly attach).
* translations: added a Norwegian Bokmål translation of the
programs by Roger Knutsen (see `AUTHORS`).
Bug fixes:
* configure: when called with `--disable-gui` the build system
still ran the check for the GUI libraries & failed if they
weren't found. This check is now skipped when the option is
given.
* mkvmerge: several color-related track header properties were
parsed into & stored as a wrong integer type internally. This
could result in wrong values being copied when very large
values were present in source files, or in error messages
when very large values were used as command-line parameters.
* MKVToolNix GUI: multiplexer: the keyboard shortcuts from the
"modify selected tracks" sub-menu didn't work right after
opening a file. They only started working after opening the
"multiplexer" menu.
Build system changes:
* Release v8.0.0 of the `fmt` library is now required. If not
found, the bundled copy will be used.
* A C++20 compatible compiler is now required for several but
certainly not all C++20 features. g++ v10 & clang++ v10
should suffice.
* Sun Mar 10 2024 Luigi Baldoni <aloisio@gmx.com>
- Update to version 83.0
New features and enhancements:
* translations: added a Belarusian translation of the programs
& the man pages by prydespar (see `AUTHORS`).
* mkvmerge, MKVToolNix GUI's chapter editor: added support for
reading chapters from ffmpeg metadata files.
* MKVToolNix GUI: added a new action type for execution after
jobs or the queue finishes: quitting MKVToolNix.
Build system changes:
* The bundled `fmt` library was updated to v10.2.1.
Other changes:
* Tons of changes were made to support the latest development
versions of libEBML & libMatroska.
* Wed Jan 03 2024 Luigi Baldoni <aloisio@gmx.com>
- Update to version 82.0
New features and enhancements:
* mkvmerge: Matroska reader: the "video alpha mode" track
header property will be copied to the output file if present.
* mkvmerge: Matroska reader: the "video alpha mode" track
header property will be reported in JSON identification mode
as the track property `alpha_mode`.
* mkvmerge: Matroska reader: the file's timestamp scaling
factor will be reported in JSON identification mode as the
container property `timestamp_scale`.
* mkvmerge: MPEG transport stream reader: teletext subtitles
intended for hearing impaired people (type 0x05) are now
marked as such via the appropriate flag in the track headers.
* mkvmerge: file identification: the JSON identification
output schema version has been bumped to 19.
* mkvmerge: added a new hack `always_write_block_add_ids` that
can be used as a workaround for players that don't support
the handling of missing "Block Addition ID" sub-elements of
"Block More" elements in block additions properly. These are
used for e.g. alpha channel data in VP9 with a "Block
Addition ID" value of 1, which is also its default value.
* mkvinfo: added support for the "video alpha mode" track
header element.
* mkvpropedit, MKVToolNix GUI's header editor: added support
for the "video alpha mode" track header property. In
`mkvpropedit` it's called `alpha-mode`.
* MKVToolNix GUI: multiplexer: when adding files the GUI can
automatically enable the "hearing impaired" flag for audio
and subtitle tracks if the file name contains the word "cc"
or "sdh" delimited by certain characters (configurable).
This feature is turned on by default.
* MKVToolNix GUI: multiplexer: when scanning for Blu-ray
playlists the GUI will now ignore playlists that are likely
meant for menus. Currently the GUI considers this to be the
case when a playlist contains the same item at least five
times. This behavior can be turned off in the preferences.
Bug fixes:
* mkvmerge: MPEG transport stream reader: fixed a crash
introduced in v81 that occurred when there was at least one
PCM track that wasn't copied from the transport stream file.
* mkvmerge: when reading data from Matroska files damaged in a
specific way, mkvmerge ended up trying to write various types
of elements that aren't allowed to be written (so-called
`EbmlDummy` elements as well as elements that don't have a
value set) to the output file, which caused the underlying
`libebml` library to abort. These types of broken elements
are now filtered out.
Build system changes:
* Qt 5 is no longer supported. Qt 6 is now required for
building MKVToolNix. This implies that the options to
`configure` revolving around configuring Qt 5 or choosing
between the two have been removed (e.g. `--disable-qt6`).
* Qt 6 detection: if detection fails, error messages from
`qmake` can now be found in `config.log`.
* Qt 6 detection: `configure` will only consider Qt 6.2.0 or
newer, not 6.0.x or 6.1.y anymore, due to the lack of
support for the multimedia module.
* Qt 6 detection: `configure` will now fail to detect Qt 6 if
the 'multimedia' module is not found by `qmake` (e.g. due to
development packages not being installed).
* The bundled `fmt` library was updated to v10.1.1.
* Sat Dec 02 2023 Luigi Baldoni <aloisio@gmx.com>
- Update to version 81.0
New features and enhancements:
* mkvmerge: MPEG transport stream reader: HEVC/H.265: added
support for reading single-layer Dolby Vision from Annex B
type bitstream read from MPEG transport streams.
* mkvmerge: MPEG transport stream reader, HEVC/H.265
elementary stream reader: added support for reading
dual-layer Dolby Vision with both the base & enhancement
layers in the same track from Annex B type bitstreams in MPEG
transport files & elementary stream files.
* mkvmerge: MPEG transport stream reader: HEVC/H.265:
implemented combining dual-layer Dolby Vision with base &
enhancement layers in different tracks.
* MKVToolNix GUI: multiplexer: added a new option in the
preferences for always enabling 'forced' subtitle tracks.
A subtitle track is considered to be 'forced' if: the
corresponding property is set in the source file; the
track's name contains the word 'forced' (in English);
deriving the 'forced display' flag from file names is active
& the file name matches the corresponding pattern. The option
is disabled by default.
* MKVToolNix GUI: multiplexer: the functionality for detecting
file name sequences when adding files can now recognize the
patterns used by GoPro's cameras for chaptered video files.
* xyzvc_dump: the end position of the current NALU will be
output in non-portable format as well.
* xyzvc_dump: HEVC: the tool will now also output the inner
NALU type of Dolby Vision NALUs (`unspec62` and `unspec63`).
Bug fixes:
* mkvmerge: when the user requests processing be stopped after
the video ends `mkvmerge` will now take appending files into
account properly. It won't stop processing unconditionally
after the first file ends anymore.
* mkvmerge: AV1 handling in readers: the readers will now
provide the pixel dimensions to the AV1 packetizer as early
as possible, just like for other video packetizers. That way
the pixel dimensions are available for calculating the
display dimensions when command-line options such as
`--aspect-ratio` & `--aspect-ratio-factor` are used. Before
the change the calculation was done based on initial pixel
dimension values of 0x0, resulting in display dimensions of
0x0, too.
* mkvmerge: HEVC/H.265 packetizer: when reading & appending
HEVC/H.265 from Matroska, MP4/MOV or FLV files the first
frame of all the appended files was sometimes dropped,
resulting in broken video at the point where video is
appended.
* mkvmerge: MPEG transport stream reader: when reading MPEG
transport streams from Blu-rays the four-byte long
`TP_extra_header` structure in front of the transport
packets are now skipped properly. Before the fix a stray
byte with value of `0x47` inside that `TP_extra_header`
structure could have thrown off the detection of where the
transport packets start, leading to mkvmerge dropping a few
audio and/or video frames at the start of the file.
* mkvextract: AAC extractor: when an invalid program config
element in the GA-specific config element is encountered,
the program config element will be disregarded, which avoids
mkvextract aborting with an exception.
* xyzvc_dump: fixed the tool aborting with an exception when
the last NALU in an Annex B type file was shorter than four
bytes.
Other changes:
* AVC & HEVC dumper development tool: the tool has been
renamed from `xvc_dump` to `xyzvc_dump` as `xvc` is an
abbreviation for an existing video codec (Extreme Video
Coding), and the tool has nothing to do with that codec.
* Mon Oct 30 2023 Luigi Baldoni <aloisio@gmx.com>
- Update to version 80.0
New features and enhancements:
* MKVToolNix GUI: if the system's locale uses one of the Han
scripts, the GUI will force Arabic numerals to be used in
spin boxes. This prevents Suzhou numerals from being used.
Bug fixes:
* build system: fixed detection of Qt6 if `clang` is used for
compilation on Linux. In that case Qt's `qmake` added a
`gcc`-specific option that `clang` doesn't understand,
`-mno-direct-extern-access`. `configure` will now pass the
parameter `-spec linux-clang` to `qmake` so that it uses the
correct compiler flags.
* build system: fixed the use of `mktemp` to be more portable.
* mkvmerge: if a video aspect ratio was given with
`--aspect-ratio-factor`, the code would apply a second
factor based on the pixel resolution, resulting in much too
large values for the `DisplayWidth` element. For example,
with a pixel resolution of 720x520 & an aspect ratio factor
of 1/1 the result should be 720x520, but instead it was
900x520. Up until release 76.0 this has only happened when a
track order was given (which unfortunately includes all
invocations with MKVToolNix GUI as it always includes the
track order). Starting with release 77.0 this has always
happened due to the automatic sorting of tracks implicitly
creating a track order, even if none was given.
* Tue Aug 22 2023 Luigi Baldoni <aloisio@gmx.com>
- Update to version 79.0
New features and enhancements:
* mkvmerge: AV1: added support for reading Dolby Vision from
AV1 IVF & OBU streams. Patches by Quietvoid.
* mkvmerge: MPEG TS reader: added support for colors in
teletext subtitles.
* MKVToolNix GUI: multiplexer: when adding files the GUI can
automatically enable the "forced display" flag for subtitle
tracks if the file name contains the word "forced" delimited
by certain characters (configurable). This feature is turned
on by default.
* MKVToolNix GUI: multiplexer: added the option
`--stop-after-video-ends` to the dialog for additional
command line options.
* MKVToolNix GUI: multiplexer: when adding Blu-ray playlists
the dialog allowing the user to select the playlist to add
will now show audio & video track properties as well (pixel
dimensions for video; sampling frequency, channels for audio).
* MKVToolNix GUI: header editor: in order to reduce confusion
with users non that versed in Matroska elements, the naming
of the two "language" track properties has been changed:
the old element is now titled "Language (obsolete)" & the
current, IETF BCP 47 based one is simply called "Language".
* MKVToolNix GUI: preferences: you can now use the "delete"
key to remove entries from simple list widgets for strings
(e.g. the list of recently used destination directories).
Bug fixes:
* mkvmerge: DTS reader: if a DTS stream doesn't start with a
DTS core but a sub-stream element (EXSS), the reader will
now look for a core. If found, it'll start processing from
there instead of from the start. This fixes the timestamp
calculation if the sampling frequency in the core & in the
extensions are different.
* MKVToolNix GUI: multiplexer: the "emphasis" and
"stereoscopy" combo-boxes now have a much smaller minimum
width, allowing to make the whole "properties" pane much
smaller again.
* Mon Jul 03 2023 Luigi Baldoni <aloisio@gmx.com>
- Update to version 78.0
New features and enhancements:
* MKVToolNix GUI: header editor: for files that only contain
legacy track language elements but no IETF language elements
the header editor will now derive the IETF language elements
from the legacy elements.
Bug fixes:
* all: Linux: if initializing the locale system based on the
system's settings fails, e.g. if environment variables such
as `LC_ALL` have been set to `fr_FR.UTF-8` but the locale
for `fr_FR.UTF-8` hasn't been built, MKVToolNix
will try to fall back to `en_US.UTF-8` first & `C.UTF-8`
second. If neither of the three succeeds, an error message
will be shown, and the program will abort. This fixes the
programs not catching an exception from the
`boost::filesystem` library which doesn't cope with
mis-configured locale systems well.
* mkvmerge: sorting tracks by type did not work properly when
some tracks weren't copied.
* mkvmerge: track numbers in the destination file were
assigned out-of-order when the track order in the source
files differs from the one in the destination file. Now
they're assigned sequentially in the order the tracks
appear in the destination file again.
* MKVToolNix GUI: under certain circumstances the GUI would
try to display error messages from a secondary thread, which
isn't allowed in Qt, causing to program to either hang or
outright crash.
* MKVToolNix GUI: the GUI will check for several potential
installation issues wrt. to having write access to certain
directories (system's temporary directory, MKVToolNix's file
identification cache directory and others) & display proper
error messages if not.
* MKVToolNix GUI: header editor: fixed the application
crashing whenever you change a property below the "segment
information" node. This bug was introduced in v77.
* MKVToolNix GUI: header editor: when reading files that only
contain legacy track language elements but no IETF track
language elements, the header editor was showing all tracks
as having "English" as the language. This bug was introduced
in v77.
* MKVToolNix GUI: header editor: when a legacy track language
element contains a country code (e.g. `fr-CA`), the header
editor was wrongfully using `und` = "undetermined" as the
language for that element. Now it'll use the language from
the language/country pair, which would be `fr` in the earlier
example.
* MKVToolNix GUI: header editor: the keyboard shortcuts from
the "modify selected track" sub-menu didn't work right after
opening a file. They only started working after opening the
"header editor" menu.
Build system changes:
* The compilation database (`compile_commands.json`) is now
always built. The variable `BUILD_COMPILATION_DATABASE` is
not evaluated anymore.
* Sun Jun 04 2023 Luigi Baldoni <aloisio@gmx.com>
- Update to version 77.0
New features and enhancements:
* mkvmerge: tracks in the destination file will now be sorted
by their type automatically unless the track order is
specified with the `--track-order` option. The order is as
follows: video tracks first followed by audio & subtitle
tracks with other rarely used types of tracks last. Tracks
of the same type will be sorted in the same order as their
source files occur in the command-line arguments. Note that
this doesn't affect file identification.
* MKVToolNix GUI: multiplexer: the default list colors used
for distinguishing source files does not include the darkest
tier anymore (the ones where one or two components are set
to the value 0x3f) as they're hard to distinguish from each
other. Only affects new installations, or when the user
presses the "reset to default colors" button.
* MKVToolNix GUI: multiplexer: the GUI will now check the
state of the 'track enabled' flag of all video, audio &
subtitle tracks when starting to multiplex or adding a job to
the job queue. If there's no track with its flag turned on
for a type, the GUI will turn on the flag for the first track
of the type. This behavior can be turned off in the
preferences.
* MKVToolNix GUI: header editor: the columns in the
tracks/attachments view and the values on the "track type"
page will now be updated each time a corresponding property
is changed (e.g. when a track's name is changed) instead of
showing what's in the file on disk.
* MKVToolNix GUI: Windows: a new settings in the preferences
lets the user chose whether to use the light or the dark
color palette, or to follow the system settings.
Bug fixes:
* Fixed compilation with fmt v10.0.0.
* mkvmerge: fixed several instances of wrong format strings
for `fmt::format` used in debug messages.
* mkvmerge: AV1 packetizer: the packetizer did not honor the
aspect ratio (factor) given on the command-line via the
`--aspect-ratio` or `--aspect-ratio-factor` options.
* mkvmerge: JSON identification: cropping parameters are
reported again even if some of the four values are not
present in the file or set to 0.
* MKVToolNix GUI: the defunct "disable the dark mode" checkbox
was removed from the preferences.
* MKVToolNix GUI: language dialog: under certain conditions
the controls for the individual components remained disabled
when the dialog is opened even though editing of individual
components is selected.
* MKVToolNix GUI: language dialog: the controls for the
individual components weren't re-initialized properly after
opening the dialog for the second & all following times,
potentially leaving previously selected/entered entries
intact, primarily when editing multiple tracks at once.
* MKVToolNix GUI: header editor: using the actions from the
"modify selected track" context menu only worked if the user
right-clicked on the first column in the view. They now work
for clicks on any of the columns.
* MKVToolNix GUI: header editor: some of the actions toggling
specific flags from the "modify selected track" did not work
correctly if the flag wasn't currently present in the file,
especially if the underlying value has a default value in the
Matroska specs.
Build system changes:
* The bundled `fmt` library was updated to v10.0.0.
* MKVToolNix GUI now uses an external Qt resource file instead
of compiling it into the executable. The resource file has
reached a size at which the C++ compiler exhausts available
virtual memory on some 32-bit architectures.
The GUI will look for the file in the directory set with
`configure`'s `--datadir` parameter on other systems
(which usually means `/usr/share/mkvtoolnix`). The `install`
build system commands installs it into that folder.
* Sun Apr 30 2023 Luigi Baldoni <aloisio@gmx.com>
- Update to version 76.0
Important notes:
* mkvmerge: removed the option `--blockadd`. Removing block
additional data is not possible anymore, as it is often
required for proper decoding.
New features and enhancements:
* mkvmerge: JSON file identification: added a child element
called `num_index_entries` to the `properties` track element
containing the number of index entries found for a track.
Currently only implemented for Matroska files where it
contains the number of cue points.
* mkvmerge: the maximum block addition ID track header value
is now calculated automatically from both the existing
mappings & the actually used block additions in the block
groups.
* mkvmerge: Matroska reader: when reading WebM files that use
block additions with ID 4 (HDR for VP9) an appropriate block
addition mapping will be created automatically.
* mkvmerge: MP4 reader: the title/movie name meta data
(content of the `udta.meta.ilst.©nam` atom) will now be
copied over as the segment title track header attribute.
* mkvmerge: MP4 reader: the comment & encoder meta data
(content of the `udta.meta.ilst.©cmt` & `….©too` atoms) will
now be copied over as global tags `COMMENT` & `ENCODER`
respectively.
* mkvmerge, MKVToolNix GUI's multiplexer: added an option to
stop processing after the primary video track ends called
`--stop-after-video-ends`. This discards any remaining
packets of other tracks.
* MKVToolNix GUI: multiplexer: automatically setting the
destination file name: added an option in the preferences
for using the first source file's directory name instead of
its file name as the basis for the destination
file name.
* MKVToolNix GUI: multiplexer: double-clicking on certain
columns in the "tracks" view will now toggle them directly
(columns "Default track" & "Forced track") or activate the
corresponding control (columns "Language", "Name" &
"Delay"). Double-clicks on other columns will do what
they've done before, too: toggling the "Copy item" state.
* MKVToolNix GUI: the dialog for editing language tags is now
created only the first time the user wants to edit a
language tag & cached afterwards instead of creating a new
instance each time. This makes subsequent uses instant.
Bug fixes:
* mkvmerge: mkvmerge will now only try to probe for VobSubs if
the name of the file to identify ends in either `.idx` or
`.sub`, preventing mis-identification of other file types if
VobSubs with the same base name exist in the same directory.
* mkvmerge: AC-3: mkvmerge will now skip certain types of
garbage data (16 bytes starting with 0x01 0x10) that can
occur before each sync frame, fixing the file not being
identified as AC-3.
* mkvmerge: Matroska reader: when reading files that use block
additions with IDs other than 1 (e.g. 4 for HDR for VP9) the
IDs will now be kept & written to the output file. Before no
ID would be written, effectively using 1 as that's the
default value for the corresponding element.
* mkvmerge: mkvmerge will no longer write block addition
mappings or the max block addition ID track header elements
when creating a WebM file as those elements aren't supported
there.
* mkvpropedit: fixed replacing chapters & tags in files that
don't contain tracks.
* Sun Mar 26 2023 Luigi Baldoni <aloisio@gmx.com>:
- Update to version 75.0.0
New features and enhancements:
* mkvmerge: MP4 reader: mkvmerge will now read Timed Text
(FourCC `tx3g`) subtitle tracks & convert them on the fly to
Matroska's simple text subtitle format (`S_TEXT/UTF8`; text
only, no styles).
Bug fixes:
* all: switched back to using `boost::filesystem` functions
for creating directories instead of the ones introduced to
work around bugs in `std::filesystem`. The latter didn't
work correctly with UNC paths after the switch to
`boost::filesystem::path` in v74.
* mkvmerge: VobSub reader: mkvmerge will now probe the `.idx`
file during VobSub identification even if the `.sub` file is
passed as the source. Avoids mis-detection of the `.sub` as
MPEG program streams.
* MKVToolNix GUI: the GUI could abort with an exception on
startup while looking for the `mkvmerge` or `mediainfo`
executables due to inaccessible folders.
* MKVToolNix GUI: preferences: when opening the preferences
the first time the UI might pre-select the first entry in
the list of interface languages if the operating system's
language is not available for MKVToolNix. This might also
happen on Linux if e.g. `en_GB` is set, even though `en_US`
is available. Now English (`en_US`) will be selected instead.
* MKVToolNix GUI: multiplexer: when adding files the GUI has
special handling for chapter/tags/segment info files. This is
done by comparing their content to certain patterns. This
recognition could wrongfully be triggered if any such file
was embedded in another file verbatim, e.g. with a chapter
XML file attachment in a Matroska file. When trying to add
that Matroska file, the GUI would treat it as a chapter file
instead of a regular one. This content-based detection was
fixed.
Other changes:
* mkvpropedit, GUI's header editor: removed support for the
deprecated "minimum cache" & "maximum cache" track header
elements.
* Thu Mar 16 2023 Max Lin <mlin@suse.com>
- Requires qt6-multimedia in Leap 15.5
* Sun Feb 12 2023 Luigi Baldoni <aloisio@gmx.com>
- Update to version 74.0.0
New features and enhancements:
* mkvmerge: SRT handling: added a hack called `--engage
keep_whitespaces_in_text_subtitles` which disables stripping
whitespaces from the start & end of each line of SRT entries
during muxing.
Bug fixes:
* all: Windows: UNC paths of type `\\?\C:\…` are supported
again by switching back to Boost's file system library
instead of using C++17's file system library.
* mkvmerge: AVC/H.264 & HEVC/H.265 packetizers: when appending
tracks the pixel dimensions will be checked & muxing will be
aborted if they don't match.
* mkvmerge: file type detection: file types that can be
detected unambiguously by their content (e.g. Matroska, MP4,
WAV…) will now preferred in the detection order over file
types based on their extension. Prevents certain cases of
mis-detection, e.g. DTS in WAV but with a file name
extension of `.dts` being detected as the wrong type of DTS.
* mkvmerge: SRT handling: whitespaces will now be stripped
from the start & the end of each line of each entry, not
just from the end of the last line.
* mkvextract: SRT extraction: whitespaces will not be stripped
from the start & end of the whole entry anymore.
* MKVToolNix GUI: multiplexer: when adding multiple files that
include certain file types (chapters, segment info and tag
files) and when the choice where to add them is "all files
to a single new tab", these certain file types will now be
added in the newly added tab as well instead of the current
tab that had already been open.
* build system: fixed compatibility with Ruby 3.2.0 by using
`FileTest.exist?` instead of `File.exists?`, `Dir.exists?` &
`FileTest.exists?` which were removed in that release.
Build system changes:
* MKVToolNix is now using & requiring Boost's "file system"
and "system" libraries again instead of C++17's file system
library. This is due to gcc's library not supporting UNC
paths of types `\\?\C:\dir\file.ext`.
* Tue Jan 03 2023 Luigi Baldoni <aloisio@gmx.com>
- Update to version 73.0.0
New features and enhancements:
* mkvmerge: greatly enhanced the speed of Base64 decoding
which is used used e.g. when reading pictures embedded in
Ogg or FLAC files or for binary data inside XML chapter &
tag files. Even small blocks of data could take unreasonably
long.
* mkvmerge: added support for reading HEVC/H.265 video from FLV
containers.
Bug fixes:
* mkvmerge: splitting: fixed a typo in the string output in
GUI mode regarding the timestamps before which splitting was
done.
* MKVToolNix GUI: job output: after having run multiple jobs
the "Clear output" functionality only reset the visible
parts. However, using the "save output" function would also
save the output generated before the user used "clear
output". Now only the output after the last use of "clear
output" is saved.
* build system: when probing for the FLAC library the Ogg
libraries will be linked with the compiled test program as
well. This fixes detection if the `pkg-config` settings for
FLAC don't list Ogg & the linker doesn't find the library
automatically.
* Sun Nov 13 2022 Luigi Baldoni <aloisio@gmx.com>
- Update to version 72.0.0
New features and enhancements:
* mkvmerge: AV1 parser: the variable-width OBU size field will
be re-written with minimal length if it's encoded longer
than necessary.
* mkvmerge: when splitting is active the program will output
the timestamps actually used for making the decision when to
split. If GUI mode is active, a specially formatted line
`#GUI#splitting_before_timestamp <timestamp>` is output as
well. Lines prefixed with`#GUI#` are suitable for machine
parsing, won't be translated and are guaranteed not to change
in format.
* MKVToolNix GUI: multiplexer: when dragging & dropping
directories to the "attachments" tab, the files contained in
those directories will be attached.
* MKVToolNix GUI: info tool: added information about the file
(directory, size, modification timestamp) at the top of each
tab.
Bug fixes:
* mkvmerge: AV1 parser: fixed the parser completely aborting
when parsing the OBU size field fails due to there not being
enough data to parse. Instead the parser will remember the
last known-good position & restart from there after more
data is available.
* mkvmerge: HDMV PGS subtitles: reverted the change that
implemented a heuristic for detecting bogus timestamps &
attempting to fix them. This was done to fix #3268.
Unfortunately this affected valid subtitle files with
intentional huge gaps in timestamps, e.g. forced subtitle
tracks. The heuristic has simply been removed.
* mkvmerge: Matroska reader: fixed reading files with EBML
Void elements before the Matroska Segment element.
* mkvmerge: fixed reversed attachment selection:
`--attachments !4` would not copy any attachment instead of
all attachments but the one with ID 4.
* mkvextract: IETF BCP 47/RFC 5646 language tags: mkvextract
will now use & prefer IETF BCP 47 track language elements if
they're present. Only affects the VobSub & USF subtitle
extraction.
* mkvpropedit, MKVToolNix GUI's chapter & header editors:
updated the list of deprecated Matroska elements. The
applications will no longer try to write those elements,
even if they're found in the file to be modified. The
programs will no longer abort with error messages such as
`assertion "false" failed`.
* mkvpropedit, MKVToolNix GUI's chapter & header editors: when
the Matroska version numbers stored in the EBML Head element
are updated, the updated EBML Head element might be smaller
than the existing one. In that case the programs used to
shrink the EBML Head & write a small EBML Void element
between the updated EBML Head & the following element,
usually a Matroska Segment element. This isn't widely
supported by programs including MKVToolNix itself, causing
them to declare such files as invalid. The programs will
now create the EBML Void element inside the EBML Head element,
making them a level 1 element instead of a level 0 element.
* mkvpropedit, MKVToolNix GUI's chapter & header editors:
often the programs have to relocate the Master elements in
which the modifications were done. In that case the Seek Head
elements must also be updated to reflect to the Master
elements' new positions. If a file contained a Seek Head
element at the start already and if that Seek Head was too
small to contain the updated positions, the programs would
end up in an endless loop trying to write data to the end,
creating ever-growing files. This is now handled properly by
voiding this too-small Seek Head & finding a proper space
for a new one instead.
* MKVToolNix GUI: header editor: fixed pixelated icons on
higher display scaling values.
Build system changes:
* bug fix: libFLAC detection is now done via `pkg-config`, and
the corresponding compiler flags are honored. Fixes static
compilation with newer versions of libFLAC with MXE where a
compiler definition is required to signal that it libFLAC
wasn't built as a DLL.
* Sun Oct 09 2022 C J <c.j@tuta.io>
- Update to version 71.1.0
Bug fixes:
* Chapters DTD: added the new edition & chapter elements from
Matroska v5.
* Chapters DTD: fixed EditionUID being mandatory. mkvmerge can
auto-generate it if it's missing from the XML file.
* Chapters DTD: fixed the `example-chapters-1.xml` not validating
against the DTD.
* Chapters DTD: corrected the old name `EditionManaged` to
`EditionFlagOrdered`.
* Chapters DTD: fixed `ChapLanguageIETF` missing its element
declaration & `ChapterLanguage` being required.
* XML DTDs: fixed elements representing binary data not allowing the `format`
attribute.
- Add Qt multimedia as a requirement for the GUI as it doesn't run
without it.
* Sun Oct 09 2022 C J <c.j@tuta.io>
- Update to version 71.0.0
New features and enhancements:
* mkvmerge, MKVToolNix GUI's multiplexer: added support for the
Emphasis audio track header element via the `--audio-emphasis`
option. It is also read from Matroska files.
* mkvmerge: the options `--list-stereo-modes` and
`--list-audio-emphasis` have been added to list all support
numerical & textual values for the `--stereo-mode` &
`--audio-emphasis` options.
* mkvpropedit, MKVToolNix GUI's header editor: added support for
the Emphasis audio track header element via the `emphasis`
property.
* MKVToolNix GUI: multiplexer: when the track properties are
configured to be displayed in a tab widget below the files &
tracks in the "Input" tab, the "Color information" tab will be
laid out in two columns. This reduces the minimum height the
whole tab widget requires. Implements #3401.
* MKVToolNix GUI: greatly sped up closing the preferences dialog
by only re-running certain initialization functions when their
corresponding settings have changed. Also fixes issues such as
[#3406].
* mkvinfo, MKVToolNix GUI's info tool: added support for the
following new elements from Matroska v5: Emphasis audio track
header element; Chapter Skip Type; Edition Display; Edition
String; Edition Language IETF.
* mkvmerge, mkvpropedit: added support for the following new
chapter elements from Matroska v5: Chapter Skip Type; Edition
Display; Edition String; Edition Language IETF. The GUI's chapter
editor will receive support for them in the next release.
Bug fixes:
* mkvmerge: Ogg/OGM reader: mkvmerge will now correctly skip tracks
of unsupported types as well as tracks for which all track header
pages haven't been found. Fixes #3394.
* Wed Aug 17 2022 Luigi Baldoni <aloisio@gmx.com>
- Switch to Qt6 build for Tumbleweed (fixes boo#1202446)
* Sun Aug 14 2022 Luigi Baldoni <aloisio@gmx.com>
- Update to version 70.0.0
New features and enhancements:
* MKVToolNix GUI: the user can now control where the job queue
files & the preferences INI file are stored via environment
variables. If set, the variable `MKVTOOLNIX_GUI_STATE_DIR`
can point to a directory where the GUI stores both the job
queue sub-directory and the preferences INI file. If you
only want to relocate the preferences INI file, you can
store the desired file name for the INI file in
`MKVTOOLNIX_GUI_CONFIG_FILE`.
* MKVToolNix GUI: when adding directories via drag & drop/copy
& paste the GUI will now offer the user the option to create
one multiplex settings tab per directory & adding all files
from that directory to the corresponding, newly created tab.
Bug fixes:
* mkvmerge: AV1 OBU parser: fixed identifying files that only
contain single frame.
* MKVToolNix GUI: multiplexer: when reading color parameters
from identified files that are floating point numbers
(minimum/maximum luminance, projection pitch/roll/yaw) the
numbers will be formatted in floating-point notation instead
of scientific notation as mkvmerge only supports the former.
* MKVToolNix GUI: multiplexer: color parameters that are
floating point numbers (minimum/maximum luminance, projection
pitch/roll/yaw) will only be set to a value during
identification if the identification actually contains the
property, and not to 0 anymore if it doesn't.
* Sat Jul 09 2022 Luigi Baldoni <aloisio@gmx.com>
- Update to version 69.0.0
Important notes:
* all: the spelling of "colour" was changed to "color"
throughout all programs to match the use of American English
spelling in MKVToolNix.
New features and enhancements:
* MKVToolNix GUI: the number of recently used entries (e.g.
destination directories) remembered by the GUI can now be
configured in the preferences.
* MKVToolNix GUI: multiplexer: when adding files the track
properties regarding color information & color mastering
meta information will be parsed & set in the corresponding
GUI controls.
* MKVToolNix GUI: job queue: the job queue can now be sorted
by clicking on the column headers.
* MKVToolNix GUI: job queue: when loading jobs from the queue
directory that weren't previously known to the program those
jobs will be sorted by their "date added" timestamp instead
of using the order the operating system returns them in.
Bug fixes:
* build system: fixed compilation with fmt v9.
* mkvmerge: HEVC ES parser: the parser will now parse at least
the first full access unit before reporting that it has found
all the required headers. Otherwise parsing might stop in the
middle of the access unit due to the source reader not
providing more data in the first call, leading to the parser
not finding the `unspec62` and `unspec63` NALUs required for
Dolby Vision.
* MKVToolNix GUI: preferences: the default actions added to
the "execute programs" section on new installations now
default to use WebM file names instead of Ogg, matching the
format of the included audio files.
Build system changes:
* The bundled `fmt` library was updated to v9.0.0.
* Mon May 23 2022 Luigi Baldoni <aloisio@gmx.com>
- Update to version 68.0.0
New features and enhancements:
* mkvmerge: HDMV PGS subtitles: mkvmerge now tries to detect
bogus timestamps (where the current timestamp is two hours
or more after the previous timestamp) & correct them to
something more sensible (1s after the previous timestamp).
That way one bogus timestamp cannot cause the rest of the
frames to not be interleaved properly with the other audio &
video packets.
* mkvmerge: added colour information, colour mastering meta
information & video projection information properties to the
JSON identification format. The properties are reported for
container types for which mkvmerge supports reading them
(Matroska & MP4). The JSON identification format version
number has been bumped to v15.
* MKVToolNix GUI: multiplexer: added controls for all the
video colour information & the video projection information.
Bug fixes:
* mkvmerge: SRT reader: entries with a duration of 0 or less
will now be skipped.
* mkvpropedit, MKVToolNix GUI's chapter & header editors:
fixed an invalid memory access when trying to update
existing Matroska files whose EBML Head element had a "size"
field length of eight bytes, and where rewriting said element
would shrink the element by one byte. Files created by
gstreamer fit the first part whereas the second depends on
the changes requested by the user.
* mkvpropedit, MKVToolNix GUI's chapter & header editors:
fixed the programs not handling having to remove EBML void
elements at the end of the file correctly and consequently
aborting.
* MKVToolNix GUI: the GUI now uses almost all SVG icons,
allowing proper scaling even for scaling factors such as
125%.
* MKVToolNix GUI: when compiled with Qt 5 the character set of
INI files is forced to UTF-8 in order to fix reading INI
files written by a version compiled with Qt 6.
Build system changes:
* Qt's SVG library is now required.
* Sat Apr 16 2022 Luigi Baldoni <aloisio@gmx.com>
- Update to version 67.0.0
New features and enhancements:
* all: IETF BCP 47/RFC 5646 language tags: when deriving the
legacy language element codes to use a language tag's ISO
639 code is also potentially interpreted as an & its prefix
is used as the legacy language code. For example, "Yue
Chinese" = `yue` is not part of ISO 639-2. However, there is
an extlang subtag `yue` with a valid prefix of `zh`
("Chinese"), and for "Chinese" there is an ISO 639-2
language code: `chi`. In this example the IETF language
element would be set to `yue` and the corresponding legacy
element to `chi`.
* all: IETF BCP 47/RFC 5646 language tags: grandfathered
language tags are now supported.
* all: IETF BCP 47/RFC 5646 language tags: all deprecated
subtags from the IANA language subtag registry are now
supported.
* all: IETF BCP 47/RFC 5646 language tags: all lists of valid
subtags have been updated from their respective
authoritative sources.
* all: IETF BCP 47/RFC 5646 language tags: all in the IANA
language subtag registry are now supported, even those
marked as deprecated and of type 'grandfathered'.
* all: IETF BCP 47/RFC 5646 language tags: reduced the maximum
number of extended language subtags that are present in a
valid tag from 3 to 1 in compliance with RFC 5646 section
2.2.2.
* all: IETF BCP 47/RFC 5646 language tags: all language codes
reserved for private/local use (`qaa`–`qtz`) are now
supported.
* all: IETF BCP 47/RFC 5646 language tags: Digital Cinema
Naming Convention language codes that fall into the IETF BCP
47 range of "private use" tags (`qaa`–`qtz`) are now
replaced by their IETF BCP 47 equivalents during
normalization (e.g. `QMS` → `cmn-Hans`).
* all: added a new translation to Chinese Simplified
(Singapore) by Dian Li.
* mkvmerge, mkvpropedit: added a new command line option called
`--enable-legacy-font-mime-types`. With this option on the
two programs will use the same legacy MIME types for fonts
whenever new attachments are added (both programs), when
reading existing attachments (only `mkvmerge`) or when
replacing existing ones (only `mkvpropedit`).
* mkvmerge, mkvpropedit: IETF BCP 47/RFC 5646 language tags:
added a command line option `--normalize-language-ietf
<mode>` which turns on normalization of IETF BCP 47 language
tags to either their canonical (mode `canonical`) or
extended language subtags form (mode `extlang`) or turns it
off (mode `off`). If the option isn't given, language tags
will now be normalized to the canonical form.
* MKVToolNix GUI: IETF BCP 47/RFC 5646 language tags: ISO
639-3 and 639-5 languages will now be used by default.
* MKVToolNix GUI: IETF BCP 47/RFC 5646 language tags: the
language editor dialog will now show warnings in several
cases: when deprecated tags are used; when the tag's
canonical and/or extlang forms differ from the user input.
* MKVToolNix GUI: IETF BCP 47/RFC 5646 language tags: the
language editor now has a button to replace the current tag
with a normalized form (canonical or extlang) if those
differ from the current tag.
* MKVToolNix GUI: IETF BCP 47/RFC 5646 language tags: added an
option in the preferences to always normalize all language
tags to their canonical or extlang forms or to turn
normalization off. Can also be enabled from the language
editor dialog.
* MKVToolNix GUI: IETF BCP 47/RFC 5646 language tags: the
language dialog now shows a warning if a variant is used
with a prefix that isn't in the variant's list of suitable
prefixes. It'll also say if the corresponding
canonical/extlang forms would have a suitable prefix.
* MKVToolNix GUI: IETF BCP 47/RFC 5646 language tags: the
language dialog now shows a warning if a script is used with
a language for which it should be suppressed.
* MKVToolNix GUI: multiplexer: the track property group boxes
in the scrollable pane are now collapsible & expandable,
saving their state over restarts of the GUI. This is in
preparation of adding many more track properties in future
releases, allowing the user to hide parts they don't use all
that often.
* MKVToolNix GUI: multiplexer: if the option "use legacy font
MIME types" is enabled in the preferences, the new command
line option `--enable-legacy-font-mime-types` will be passed
to `mkvmerge` in order to have it remap the MIME types of
existing attachments, too.
Bug fixes:
* all: IETF BCP 47/RFC 5646 language tags: variants aren't
validated wrt. to prefixes anymore as BCP 47 doesn't
actually pose restrictions on them, saying only that
prefixes "are suitable sequences" for use with the variants.
What is now verified, though, is that no variant is used
multiple times within the same language tag.
* build system & MKVToolNix GUI: fixed detecting the presence
of & the compilation with the multimedia module of Qt
version 6.2.0 and newer.
* MKVToolNix GUI: job queue: fixed compiling in the audio
player code for the the "play audio" end-of-job action.
* MKVToolNix GUI: multiplexer: recognizing added XML chapter,
segment info or chapter files required the XML declaration &
root node (e.g. `<?xml…?> … <Chapters>` for chapters) be
located within the first 1 KB, which wasn't enough for files
that contain a lot of comments at the start like the
included `example-chapters-2.xml`. The detection range was
extended to 10 KB.
Build system changes:
* The bundled `fmt` library was updated to v8.1.1.
* The bundled `nlohmann-json` library was updated to v3.10.5.
* The bundled `pugixml` library was updated to v1.12.1.
* Sun Mar 13 2022 Luigi Baldoni <aloisio@gmx.com>
- Update to version 66.0.0
New features and enhancements:
* mkvpropedit: added a new option `--chapter-charset` allowing
the user to specify the character set to use when reading
the following chapter file.
* MKVToolNix GUI: each language shortcut can now be associated
with an optional track name that is set along with the
language when the shortcut is used.
Bug fixes:
* mkvmerge: Ogg/OGM reader: mkvmerge will no longer abort with
an exception when it encounters Vorbis comments that contain
data that isn't valid UTF-8.
* MKVToolNix GUI: multiplexer: fixed several issues with the
tab order of elements in the "properties" pane and the
"output" tab. Also fixed the language display widgets (e.g.
"track language" in the "properties" pane) never receiving
tab focus.
* MKVToolNix GUI: multiplexer: the chapter name template will
now be passed to `mkvmerge` if a chapter file is selected on
the "output" tab.
* Sun Feb 06 2022 Luigi Baldoni <aloisio@gmx.com>
- Update to version 65.0.0
New features and enhancements:
* mkvmerge: the options `--default-track` and `--forced-track`
have been renamed to `--default-track-flag` and
`--forced-display-flag` respectively
for improved consistency with other option names & the
wording used in the GUI. However, the old names will be
supported and recognized
indefinitely. What will remain unchanged is the property
names for those flags in mkvmerge's identification output.
Existing third-party programs will continue working as they
are.
* mkvmerge: added a new option `--track-enabled-flag` to set
or unset the "track enabled" track header flag.
* mkvmerge: MP4 reader: `mkvmerge` will now evaluate the
`flags` field of the track header atom (`tkhd`) and set the
track's "enabled" flag accordingly.
* MKVToolNix GUI: multiplexer: added support for the "track
enabled" track header flag.
* MKVToolNix GUI: multiplexer, header editor: added several
menu entries & keyboard shortcuts for toggling various track
flags of the currently selected tracks, e.g. `Ctrl+Alt+F, D`
(that's `Ctrl` and `Alt` with `F` simultaneously followed by
`D` without any other key pressed) for toggling the "default
track" flag.
* MKVToolNix GUI: multiplexer, header editor: added menu
entries & keyboard shortcuts for setting the language of the
currently selected tracks to one from a configurable list of
languages. The shortcuts used are `Ctrl+Alt+A, 1` through
`Ctrl+Alt+A, 0` for the first ten entries of that list
(that's `Ctrl` and `Alt` with `A` simultaneously followed by
a digit without any other key pressed).
* MKVToolNix GUI: chapter editor: if the user enters commas in
start or end timestamps they will automatically be changed
to points as the decimal separator, allowing for easier copy
& paste from other programs/sources.
* MKVToolNix: header editor: the selected track or attached
file can now be moved up & down with the keyboard shortcuts
`Ctrl+Up` & `Ctrl+Down` respectively.
Bug fixes:
* mkvmerge: Matroska reader: DVB subtitle tracks with a codec
private data size of more than five bytes are accepted now,
too.
* Mon Jan 10 2022 Guillaume GARDET <guillaume.gardet@opensuse.org>
- Update _constraints to cover all architectures, not only ppc64
* Mon Dec 27 2021 Luigi Baldoni <aloisio@gmx.com>
- Update to version 64.0.0
New features and enhancements:
* MKVToolNix GUI: language dialog: when the user switches
between the two edit modes, the mode's corresponding first
control is automatically focussed.
Bug fixes:
* all: language lists: the entries for "Ancient Greek (to
1453)" and "Modern Greek (1453-)" have been renamed to
"Greek (ancient, -1453)" and "Greek (modern, 1453-)"
respectively in order to be easier to find.
* mkvmerge: VobSub reader: files containing `id: --` lines to
indicate that the track language isn't known were rejected
by `mkvmerge`. Now they're accepted, and `und`
(undetermined) is used as the language.
* MKVToolNix GUI: chapter editor: the "Save to Matroska or
WebM file" function was using the wrong standard file dialog
(the "open file" one instead of "save"), leading to
confusing button names.
* MKVToolNix GUI: high DPI scaling: fixed the icons in the
tool selector having the wrong size for scaling factors
other than 100% or 200%.
Build system changes:
* The bundled `fmt` library was updated to v8.0.1.
* The bundled `nlohmann-json` library was updated to v3.9.1.
* The bundled `pugixml` library was updated to v1.11 revision
6a76cac.
* The bundled `utf8-cpp` library was updated to v3.2 revision
b85efd6.
* Sun Nov 14 2021 Luigi Baldoni <aloisio@gmx.com>
- Update to version 63.0.0
New features and enhancements:
* mkvmerge: AC-3 parser: E-AC-3 with BSID values > 10 and ≤ 15
are recognized now, too.
* mkvmerge: when using language codes for track selection
(e.g. `-a und,en`) all tracks that do not have a language
property (due to their container not providing one, e.g.
AVIs) will be treated as if they did have one set to `und`
("undetermined") as that is the language the track will have
in the Matroska file anyway. Before this change it wasn't
possible to match such tracks via language codes.
* MKVToolNix GUI: the spinner in the bottom right corner will
now be hidden when no jobs are currently running.
* MKVToolNix GUI: header editor: a new column has been added
to the tree view showing the status of the "track enabled"
flag. The information is also shown on the track overview
page on the right.
* MKVToolNix GUI: header editor: users can now reorder tracks
by dragging & dropping.
Bug fixes:
* mkvmerge: AVI reader: fixed reading AVI files that contain
`vprp` video properties header chunks; reading aborted too
early.
* Sun Oct 10 2021 Luigi Baldoni <aloisio@gmx.com>
- Update to version 62.0.0
New features and enhancements:
* all: IETF BCP 47/TFC 5646 language tags: all ISO 639
languages are now available, even the ones that aren't of
types "Constructed", "Living" or "Special".
* mkvmerge, mkvpropedit: chapters: both programs will now
write elements set to their default value, too (e.g. the
legacy language element if it's set to `eng`). This is done
to be more consistent with how MKVToolNix GUI writes chapters.
* MKVToolNix GUI: multiplexer: when adding new files as
attachments the GUI checks if there are other attachments with
the same name. If so, the GUI would ask whether to skip the
affected files or add them anyway. There's now an option in
the preferences to always skip such files, and it's enabled
by default.
* MKVToolNix GUI: chapter editor: removed the support for
explicitly setting the legacy country elements. Instead the
legacy country elements are derived from the region parts of
the IETF BCP 47 languages.
Bug fixes:
* mkvmerge: fixed a crash when splitting by chapters is
enabled but there are no chapters at all.
* mkvmerge: the error message when trying to split by a
chapter number that doesn't exist contained the wrong
number of chapters that actually do exist.
* mkvmerge: AVC ES parser: fixed mkvmerge aborting due to
uncaught exception when encountering bad SPS data.
* mkvmerge: AVC/H.264 parser: re-added the hack `--engage
all_i_slices_are_key_frames` which was accidentally removed
in release v61.
* mkvmerge: AVI reader: fixed a crash trying to allocate too
big of a memory chunk due to an integer overflows in check
conditions.
* mkvmerge: HEVC ES parser: fixed another issue with frame type
recognition. Certain frames were marked as B
frames/discardable on the container level even though they
could be reference pictures. Now only SLNR pictures
(sub-layer non-reference) are marked that way.
* mkvmerge: HEVC ES reader: improved file content detection
for HEVC ES files with wrong file name extensions (e.g.
`.mkv`), which fixes them being mis-detected as something
else, e.g. DTS.
* mkvmerge: HEVC ES parser: "end of sequence" NALUs are kept
now, and no superfluous flushing will be done when one is
found. This prevents splitting NALUs into two different
Matroska blocks when they should really be part of a single
one, also causing problems with erroneous timestamps. Mostly
affects DoVi NALUs.
* mkvmerge: Matroska reader, TrueHD: mkvmerge will now probe
much more TrueHD frames trying to find the first sync frame.
This fixes track detection in situations when a TrueHD
doesn't start with a sync frame, e.g. when the source file's
the result of splitting between sync frames.
* mkvmerge, MKVToolNix GUI's chapter editor: IETF BCP 47/RFC
5646 language tags: when reading chapters from MPLS playlist
files, the `ChapLanguageIETF` element will now be set to the
configured default chapter language, not just the legacy
`ChapterLanguage` element.
* mkvmerge, mkvpropedit, MKVToolNix GUI's chapter editor: IETF
BCP 47 elements will now always be created before writing
chapters unless IETF BCP 47 elements are disabled.
* mkvmerge, mkvpropedit, MKVToolNix GUI's chapter editor: when
a chapter display element contains legacy language & country
elements but no IETF BCP 47 elements and IETF BCP 47 elements
aren't disabled, the IETF BCP 47 elements created will
contain the region from the legacy element.
* mkvmerge, mkvpropedit, MKVToolNix GUI's chapter editor:
Legacy country elements are now created when IETF BCP 47
elements are present & contain a region code allowed in
legacy country elements.
Build system changes:
* The `tools` sub-directory is now always built. The
corresponding `configure` option `--with-tools` has been
removed. The `install` target still doesn't install them,
though.
- Add tools subpackage
* Mon Aug 30 2021 Luigi Baldoni <aloisio@gmx.com>
- Update to version 61.0.0
New features and enhancements:
* all: IETF BCP 47/RFC 5646 language tags: implemented support
for officially registered IANA language tag extensions.
* mkvmerge: track selection: when using language tags for
selecting which tracks to keep, mkvmerge will now use
component-based language tag matching instead of comparing
them verbatim. This means that only those components
(language, region etc.) the user specified will be required
to exist and be equal. For example, if a file contains three
subtitle tracks with languages `es` (generic Spanish),
`es-MX` (Spanish as spoken in Mexico) and `es-ES` (Spanish as
spoken in Spain), the user can use `--stracks es` to match
all three tracks or be more specific with e.g. `--stracks
es-MX` which would only match one track. Similarly inverting
the selection with e.g. `--stracks !es` would get rid of all
three tracks, not just the one for the generic Spanish.
* MKVToolNix GUI: multiplexer: deriving track languages from
file names: the GUI can now detect full BCP 47/RFC 5646
language tags in file names.
* MKVToolNix GUI: multiplexer: deriving track languages from
file names: the default list of boundary characters now
includes `-`.
* MKVToolNix GUI: multiplexer: the GUI now defaults to the
"lower" process priority setting for new installations in
order to leave more room for other applications, especially
interactive ones. Up to and including v59 the default was
the "normal" process priority. v60 changed that to "lowest",
which turned out to be much slower on Windows for no real
gain over "lower". The setting will be auto-corrected by the
GUI if the settings file were saved last with a version
between v60.0.0.0 & v60.0.0.17 & "lowest" & it is still set
to "lowest".
* HEVC dumper development tool: the tool has been renamed to
`xvc_dump` and extended to be able to dump AVC/H.264
bitstreams, too. It now also detects the type of bitstream
framing (ISO 14496-15 vs. ITU-T H.264/H.265 Annex B).
Bug fixes:
* all: IETF BCP 47/RFC 5646 language tags: fixed a corner case
of wrongfully allowing scripts/variants not listed in any of
the entries in the prefix list when the prefix list contains
prefixes restricting scripts/variants and a prefix solely
with the language at the same time (example: the variant
`ekavsk` with its prefixes `sr`, `sr-Cyrl` and `sr-Latn`
where e.g. `sr-ekavsk` and `sr-Cyrl-ekavsk` should be
allowed but not `sr-Bali-ekavsk`).
* mkvmerge: HEVC/H.265: the frame type of B frames was often
wrongfully signalled as P frames instead, both with
`BlockGroup` (missing second references) and `SimpleBlock`
("discardable" flag not set) elements.
* mkvmerge: SSA/ASS packetizer: the frame numbers will now be
re-calculated when appending SSA/ASS tracks so that frame
numbers of appended tracks are always strictly higher than
frame numbers of the track they're appended to.
* mkvmerge, MKVToolNix GUI's chapter editor: BCP 47/RFC 5646
language tags: when BCP 47 language tags are used with a
language code that isn't part of ISO 639-2, the programs
will now write a legacy language element set to `und`
("undetermined") instead of not writing such an element at
all or writing one with an invalid code.
* mkvmerge, MKVToolNix GUI's chapter editor: BCP 47/RFC 5646
language tags: the programs will ensure that the legacy and
IETF language elements written will be unique within the
scope of the same "chapter display" element.
* mkvinfo, MKVToolNix GUI's info tool: in summary mode the
frame type was reported wrong for `BlockGroup` elements in
which the `ReferenceBlock` elements were located behind the
`Block` element.
Build system changes:
* all: `std::codecvt_utf8` is now used instead of Boost's
`utf8_codecvt_facet`. The bundled copy the latter in
`lib/boost` has therefore been removed.
- Drop mkvtoolnix-use-system-boost.patch (no longer necessary)
* Sat Jul 31 2021 Luigi Baldoni <aloisio@gmx.com>
- Update to version 60.0.0
New features and enhancements:
* all: IETF BCP 47/RFC 5646 language tags: added support for
language families from ISO 639-5 that aren't part of 639-2.
* all: IETF BCP 47/RFC 5646 language tags: implemented support
for Alpha 2 country codes of the "user-defined" category:
`AA`, `QM`–`QZ`, `XA`–`XZ` and `ZZ`.
* all: IETF BCP 47/RFC 5646 language tags: updated the various
lists of valid subtags from the official specs.
* MKVToolNix GUI: multiplexer: pressing the keyboard shortcut
for the track's "Language" label (Alt+L for English) will
now open the language dialog.
* MKVToolNix GUI: multiplexer: added an option in the
preferences for turning off the colored boxes indicating
which file each track belongs to.
Bug fixes:
* all: IETF BCP 47/RFC 5646 language tags: fixed validating
extended language & variant subtags against their allowed
prefixes (e.g. a valid tag with a country code as in
`de-CH-1996` is recognized as valid while two generally
known variants that aren't allowed together as in
`de-1901-1996` is recognized as invalid).
* all: IETF BCP 47/RFC 5646 language tags: when looking up a
language for a two- or three-letter code, the programs will
no longer compare that code with language names as that was
unintended, ambiguous (e.g. the code "Ga" could be
interpreted as the 639-2 alpha-2 code for "Irish" or as the
name of the language called "Ga") and only worked with
languages whose name was at most three letters long.
* mkvmerge: HEVC/H.265: appending Matroska files with HEVC
tracks might lead to the loss of the first couple of frames
from each of the second and all following files.
* mkvmerge, mkvextract: HEVC/H.265 parser: fixed the programs
aborting when parsing VPS or SPS NALUs with invalid content
due to unhandled exceptions.
* MKVToolNix GUI: multiplexer: when the option "use legacy
MIME types for font attachments" is enabled, the GUI will
now use `application/x-truetype-font` for font collection
files.
* MKVToolNix GUI: multiplexer: when adding multiple files at
once, the GUI will sort file names with numbers the way a
human would expect it to. For example, `1.mp4`, `9.aac`,
`10.srt`, `11.srt` are now sorted exactly that order instead
of `1.mp4`, `10.srt`, `11.srt`, `9.aac`.
* MKVToolNix GUI: header editor: the header editor will now
honor the "use legacy MIME types when adding font
attachments" setting when adding new attachments.
* Sat Jul 10 2021 Luigi Baldoni <aloisio@gmx.com>
- Update to version 59.0.0
New features and enhancements:
* mkvmerge: WebVTT parser: the parser now follows the specs'
rules for parsing timestamps more closely by being more
lenient: it allows arbitrary number of spaces & tabs at the
start of the line & around the arrow; it allows any number
of digits for the hours.
* MKVToolNix GUI: multiplexer: when adding a Blu-ray playlist
without scanning for other playlists the GUI will now look
for disc library information & let the user select which one
to use if there's more than one entry.
* MKVToolNix GUI: multiplexer: added an option for sorting
files & tracks by track types when adding them to multiplex
settings. The order is: video first followed by audio,
subtitles and other types. Files & tracks can still be
reordered manually later. The option is enabled by default &
can be found in the preferences → "Multiplexer" page →
"Adding files" section.
* MKVToolNix GUI: multiplexer: added an option for recognizing
file name sequences such as `movie.001.mp4`, `movie.002.mp4`,
`movie.003.mp4` when adding multiple files at once. If a
sequence is detected, the only first file will be added while
the second and following file names will be appended to the
first one. The option is enabled by default & can be found
in the preferences → "Multiplexer" page → "Adding files"
section.
* MKVToolNix GUI: multiplexer: added small colored boxes for
each file & track in order to indicate from which file each
track is read. The colors used can be configured in the
preferences → "Multiplexer" page → "File & track colors"
section.
Bug fixes:
* build system: fixed compilation with fmt v8. Fixes #3151.
* mkvmerge: SRT subtitle reader: characters that aren't valid
according to the assumed encoding of the file will now be
replaced by the Unicode "Replacement Character" U+FFFD
instead of keeping the invalid characters, potentially
violating the Matroska specs.
* mkvmerge: WebVTT parser: the parser now accepts timestamps
with hours larger than 99.
* mkvextract: TTA extraction, only on Windows: fixed removing
the temporary file created during extraction.
* mkvmerge, mkvpropedit, MKVToolNix GUI's multiplexer & header
editor: MIME type detection is now done using Qt instead of
the `magic` library. The main impact is the MIME types of
TrueType & OpenType fonts are now detected correctly.
* MKVToolNix GUI: multiplexer: when adding files to the
multiplexer by running the GUI's executable with file names
as command line arguments, the source directory will be
remembered as the "last open directory" again, causing
subsequent uses of the "open file" dialog to start in the
same directory.
* MKVToolNix GUI: multiplexer: the "default track flag" column
in the track list was missing its icons. Additionally it
contained text even for things that aren't regular tracks
and therefore do not actually have that flag (e.g. chapters
or tags).
* MKVToolNix GUI: multiplexer: the default for the dialog
asking the user what to do with dragged & dropped files if
they've never seen the dialog is back to adding the files to
the current multiplex settings instead of "add as additional
parts" which was an unintentional default.
* MKVToolNix GUI: multiplexer: the "show command line" dialog
will now always use backward slashes for the "Windows
(cmd.exe)" mode and forward slashes for the "Linux/Unix
shells" mode, regardless of the operating system it's
currently running on.
Build system changes:
* The Qt library is now required for building all
applications, even the command-line ones, as they use Qt's
MIME type detection capabilities. In turn this means that
you cannot disable the Qt usage anymore; either Qt5 or Qt 6
is required. You can still chose not to build MKVToolNix
GUI, though. A new option has been added to `configure`
for this purpose: `--disable-gui`.
* The `gmp` library is now required.
* The `magic` library is not used anymore.
* The `PCRE2` & `JPCRE2` libraries are not used anymore. The
bundled version of `JPCRE2` was removed.
* Boost's "rational" library is not used anymore.
* `configure`: the option `--enable-appimage` has been
removed. The location of the relevant directories within an
AppImage is now detected automatically.
* The bundled `fmt` library was updated to v8.0.0.
- Use system version of utfcpp
* Sun Jun 13 2021 Luigi Baldoni <aloisio@gmx.com>
- Update to version 58.0.0
New features and enhancements:
* mkvmerge, MKVToolNix GUI's multiplexer: the handling of the
"default track" flag has been changed to match the recent
changes to the Matroska specifications. The new semantics
are that if it is set, it is supposed to signal to the
player that this track is eligible for being played by
default, potentially taking other factors such as user
preferences regarding languages into account.
This implies that more than one track of each type can have
this flag set. For example, a Blu-ray disc with three audio
tracks might have the main audio in both English and
Japanese, whereas the third audio track contains the
director's comments. In such a case the first two tracks
should have the "default track" flag set, the third one
shouldn't.
Earlier `mkvmerge` was enforcing that only one track of each
type could have the flag set. This restriction has been
removed, both in `mkvmerge` and in the GUI's multiplexer.
`mkvpropedit` and the GUI's header editor are unaffected as
they've always allowed to set the flag on as many tracks as
the user wanted.
* mkvmerge: AVC/H.264 & HEVC/H.265 identification: added the
stream's pixel dimensions (AVC only; were present for HEVC
already) & default duration.
* mkvmerge, mkvextract: HEVC/H.265: added support for reading
single-layer Dolby Vision from Annex B type bitstreams
(elementary streams, MPEG transport streams).
* mkvinfo: the option `-X`/`--full-hexdump` now affects all
binary elements, not just the frame data in `SimpleBlock`
and `BlockGroup` elements.
* MKVToolNix GUI: multiplexer: the "delay" and "sync" options
can now be used for chapters in source files, too.
* MKVToolNix GUI: when moving list entries up & down with the
optional buttons or the keyboard shortcuts (instead of using
drag & drop), the GUI ensures that the top-most selected
entry remains visible after the move.
* MKVToolNix GUI: added an option in the preference to use
legacy MIME types for font attachments instead of the current
standard ones (e.g. 'application/x-truetype-font' instead of
'font/sfnt' and 'font/ttf').
Bug fixes:
* build system: fixed filtering out optimization options when
compiling the file `iso639_language_list.cpp` (before only
numeric optimization levels were filtered out and only if it
wasn't the last option in the list of flags).
* build system: when libmagic was detected via `pkg-config`,
MKVToolNix was actually compiled without support for
libmagic due to a preprocessor symbol not being defined.
* mkvmerge: MP4 reader: fixed an issue with timestamps
overflowing when the file's or the track's time scale is
large.
* mkvmerge, mkvextract: fixed key frame handling for
`BlockGroup` elements with a forward reference but no
backward references.
* mkvmerge, mkvpropedit, MKVToolNix GUI's chapter editor: the
programs will no longer omit writing mandatory elements set
to their default value if other elements of the same type
are present in the same master. This affects mostly the
"chapter language" element which may occur multiple times
within the same "chapter display" master. If it does occur
multiple times and one of them is set to "English" (which is
that element's default value), that element will now be
written, too.
* mkvmerge, mkvpropedit, MKVToolNix GUI's chapter editor: when
parsing chapter files IETF & legacy language elements as
well as legacy country elements will now be properly
generated depending on which exist already, especially when
there's more than one language and/or country element
in a "chapter display" element.
* mkvmerge, mkvpropedit, MKVToolNix GUI's chapter editor:
fixed reading OGM-style chapter files with timestamps that
don't have exactly three decimal places. Any number of
decimal places between one and nine is now supported for
nanosecond precision.
* MKVToolNix GUI: chapter editor: added/fixed support for
"chapter display" elements with multiple languages or
countries.
Build system changes:
* Qt 6: added support for building with Qt 6. `configure` will
look for Qt 6 first and only continue looking for Qt 5 if Qt
6 isn't found or disabled via `--disable-qt6`.
Qt 6 detection works by first looking for the `qmake6`
binary. Its location can be specified with the
`--with-qmake6=…` option.
All other Qt 6 related facts (such as compiler & linker
flags or the position of the other required tools such as
`lconvert`, `moc`, `rcc` and `uic`) will be derived from
the output generated by `qmake6`.
Note that at this point Qt 6 is not yet supported for the
cross-compilation build to Windows, nor is a static Qt 6
build supported yet. Note that the command line options
`--enable-static-qt`, `--with-qt-pkg-config-modules` and
`--without-qt-pkg-config` only apply to the Qt 5 and have
no effect on Qt 6.
* Qt 5: the options for specifying the position of the tools
(`--with-moc=…`,`--with-rcc=…` and `--with-uic=…`) have been
removed. Their position will now be derived from the output
generated by `qmake`.
* `configure`: completely disabling the GUI now requires
passing both `--disable-qt6` and `--disable-qt` options.
* Boost's multi-precision library is now required.
* Boost v1.66 or newer is now required.
* Sat May 22 2021 Luigi Baldoni <aloisio@gmx.com>
- Up date to version 57.0.0
New features and enhancements:
* mkvmerge: MP4 reader: added support for reading Dolby Vision
from MP4 files (FourCCs `dvh1` and `dvhe`; configuration
records `dvcC`, `dvvC` and `hvcE` will be converted into
block addition mappings).
* mkvmerge: SRT subtitles: mkvmerge now accepts empty text
files with the extension `.srt` as SRT subtitle files,
enabling the creation of empty SRT tracks.
* mkvmerge, mkvextract: HEVC/H.265: access unit delimiter
NALUs will no longer be discarded, neither during muxing nor
during extraction.
* MKVToolNix GUI: preferences: switched the order & wording of
controls in the "enabling items" panel to make it clearer
that certain controls define exceptions.
Bug fixes:
* mkvmerge: HEVC/H.265 parser: several NALU types, notably the
Dolby Vision-specific NALUs ("unspecified 62" and
"unspecified 63") and suffix SEI NALUs, are now stored with
the frame they belong to instead of with the next frame.
* mkvmerge: HEVC/H.265 packetizer: fixed setting the track's
default duration when reading HEVC/H.265 from Matroska files
that don't have a default duration set.
* mkvmerge: HEVC/H.265 packetizer: fixed the calculation of
the duration of frames so that `SimpleBlock` elements can be
used again instead of `BlockGroups` with `BlockDuration`
elements.
* mkvmerge, mkvextract: HEVC/H.265 parser: fixed issues with
ordering & duplication of certain NALUs (parameter set &
prefix SEI NALUs).
* MKVToolNix GUI: multiplexer: when dragging & dropping files
to the multiplexer, the source directory will be remembered
as the "last open directory" again, causing subsequent uses
of the "open file" dialog to start in the same directory.
* mkvinfo: fixed the position of frames in block groups
containing "block duration" elements in summary mode (e.g.
for subtitle tracks).
Build system changes:
* `configure` will now try to detect `libmagic` via
`pkg-config` and fall back to including & linking directly if
it cannot be found via `pkg-config`.
* Fri Apr 09 2021 aloisio@gmx.com
- Update to version version 56.1.0
New features and enhancements:
* mkvmerge: AAC: added support for LOAS/LATM files with
channel configuration indexes 9–21 (e.g. channel count 22.2
for index 13) according to Rec. ITU-R BS.1196-7 & ISO/IEC
23008-3:2019.
Bug fixes:
* mkvmerge: HEVC/H.265 parser: fixed invalid memory access
that could happen when reading certain types of HEVC data
(e.g. with changing parameter sets mid-stream) from certain
containers (e.g. Matroska). This bug was introduced in
release 56.0.0.
* mkvextract: AAC: mkvextract will now abort with an useful
error message when the user tries to extract a track whose
'audio-specific config' element in `CodecPrivate` signals a
number of channels of 7 or greater than 8 as that isn't
supported by the ADTS format.
Build system changes:
* configure: the `--enable-ubsan` option hasn't actually
enabled anything since release 39.0.0.
* Mon Apr 05 2021 Luigi Baldoni <aloisio@gmx.com>
- Update to version 56.0.0
New features and enhancements:
* mkvmerge, mkvpropedit: tags: the programs will no longer
write tag elements that are mandatory and set to their
default value (e.g. "tag language" set to `und` =
undetermined).
* mkvmerge, mkvpropedit, MKVToolNix GUI chapter editor:
chapters: the programs will no longer write chapter elements
that are mandatory and set to their default value (e.g.
"chapter language" set to `eng` = English or "Chapter flag
enabled" = 1).
* mkvextract: chapters: mkvextract will no longer add a
`ChapterLanguage` element set to `eng` to the generated XML
content if the source file doesn't contain such an element.
* MKVToolNix GUI: multiplexer: when using the "tab widget
below the files & tracks" layout option for the track
properties the elements in the "general options" tab will
use six rows à four columns instead of twelve rows à two
columns, greatly reducing the required height.
Bug fixes:
* mkvmerge: AAC reader: fixed mkvmerge aborting to read AAC
files bigger than 2 GB with a message about not being able
to allocate memory.
* mkvmerge: chapters: `ChapLanguageIETF` elements were still
created when the option `--disable-language-ietf` was given
after an option leading to the creation of chapters. Now the
position doesn't matter anymore.
* mkvmerge: chapters: when the option
`--disable-language-ietf` is used, `ChapLanguageIETF`
elements won't be written even when sources are read
(Matroska files or XML chapters files) that do contain those
elements.
* mkvmerge: tags: when the option `--disable-language-ietf` is
used, `TagLanguageIETF` elements won't be written.
* mkvmerge: tags: mkvmerge will no longer write language
elements for the track statistics tags it creates, making
the effective language "undetermined" due to `und` being the
default value for the legacy tag language element.
* mkvmerge: tags: the XML tag parser will now validate all
`<Simple>` children of `<Tag>` elements, not just the first
for each `<Tag>`.
* mkvmerge: tags: the XML tag parser now uses the
spec-compliant `und` ("undetermined") as the default
language for `<Simple>` tags instead of `eng`.
* mkvmerge, mkvpropedit: tags: mkvmerge will no longer set the
"target type" for track statistics tags (earlier it used
`MOVIE`). The "target type value" will still be set to `50`.
* mkvmerge, mkvextract: HEVC/H.265: both programs will now
normalize the placement of VPS, SPS and PPS NALUs. Each key
frame is prefixed with exactly one copy of the currently
active parameter sets. This fixes certain classes of bugs
related to splitting/appending.
* mkvinfo: when compiled with newer versions of the `fmt`
library, certain numbers were not output correctly (e.g. a
track's audio sampling frequency of 48000 might be output as
48).
* MKVToolNix GUI: multiplexer: deriving the track language
from the file name will match languages case insensitively
again (like versions prior to v55).
* MKVToolNix GUI: multiplexer: under certain circumstances
keyboard shortcuts such as `Ctrl+W` for closing the active
tab or `Ctrl+R` for starting to multiplex ceased to work
until the user did certain other things (such as switching
to a different tool & back to the multiplexer or opening the
multiplexer menu). This started with v54.
* MKVToolNix GUI: chapter editor: the editor will no longer
create empty `ChapterCountry` elements when adding a chapter
name with no default country selected in the preferences.
Build system changes:
* The bundled `fmt` library was updated to v7.1.3.
* Sat Mar 06 2021 Luigi Baldoni <aloisio@gmx.com>
- Update to version 55.0.0
Bug fixes:
* MKVToolNix GUI: multiplexer: the user can now configure what
to do when using the "Add source files" button independently
of the setting for what happens when files are dragged &
dropped onto the GUI. The same options are available, but
they're distinct settings, allowing for different use cases.
* MKVToolNix GUI: multiplexer: deriving the track language
from file names doesn't use one big regular expression of all
enabled languages anymore. Instead, the file name is split
into parts on a list of characters (such as `.` or
`(` and `)`; configurable in the preferences). This prevents
the regular expression becoming too big for the regular
expression library to handle when many languages are enabled.
* MKVToolNix GUI: preferences: the language lists for
"deriving track languages" and "enabling items by language"
always included all the ISO 639-3 languages, even if those
weren't enabled in the "often-used languages" pane.
Other changes:
* mkvmerge, MKVToolNix GUI multiplexer: the functionality for
changing the length of the NALU "size" field for AVC/H.264
and HEVC/H.265 tracks has been removed. The corresponding
command-line option will continue to be recognized by
mkvmerge as not to break existing third-party applications,
but it won't actually do anything.
* Fri Feb 26 2021 Luigi Baldoni <aloisio@gmx.com>
- Update to version 54.0.0
New features and enhancements:
* mkvmerge: added support for using ISO 639-3 language codes in
IETF BF47 language tags.
* mkvmerge: AC-3 parser: added support for byte-swapped AC-3
data.
* mkvmerge: Matroska reader: for audio tracks that have the bit
depth track header set mkvmerge will now keep that header
even for codecs that don't require it for decoding.
* mkvmerge: MPEG transport stream reader, PCM audio tracks:
mkvmerge will now re-order the channels for 5.1, 7.0 and 7.1
channel tracks from the Blu-ray layout to the
WAVEFORMATEXTENSIBLE layout expected in Matroska.
* mkvmerge, mkvinfo, mkvpropedit, MKVToolNix GUI: added support
for the following new track header elements: "hearing impaired"
flag, "visual impaired" flag, "text descriptions" flag,
"original" flag, "commentary" flag.
* MKVToolNix GUI: added support for using ISO 639-3 language
codes in IETF BF47 language tags. As there are several
thousand of them, they're deactivated by default and must be
activated in the preferences ("GUI" → "Often used selections"
→ "Languages").
* MKVToolNix GUI: multiplexer: when adding Blu-rays the user
can select multiple playlists to add simultaneously in the
"select playlist to add" dialog.
* MKVToolNix GUI: multiplexer: the file name extensions "eb3"
and "ec3" were added for Dolby Digital Plus & "mpl" for Dolby
TrueHD in the file dialogs.
* MKVToolNix GUI: multiplexer: when adding multiple files the
dialog asking the user what to do with them has gained a new
checkbox. If enabled, all files containing at least one video
track will always be placed in newly created multiplex
setting.
* MKVToolNix GUI: multiplexer: added a menu entry in the
"Multiplexer" for adding all files that are currently in the
clipboard.
Bug fixes:
* mkvextract: AAC: fixed wrong channel mask field in the ADTS
headers for 7.1 channel layouts.
* mkvextract: h.265/HEVC extraction: if the first frame starts
with the parameter sets (SPS, PPS & VPS), the ones from
CodecPrivate aren't written and the ones from the first frame
are kept.
* mkvmerge: fixed the calculation of chapter timestamps read
from NTSC DVDs.
* MKVToolNix GUI: IETF BCP 47 language widget: the language
combo box will now always contain the language code the user
enters in the free-form field, even if it isn't in the list of
often-used languages the user configured in the preferences.
* MKVToolNix GUI: multiplexer: when browsing for the
destination file name the default directory is now chosen
according to the preferences regarding how the destination
file name should be formed. For example, if the policy is
set to "fixed output directory" then that output directory
will be the one initially set when the directory selection
dialog is opened.
* MKVToolNix GUI: multiplexer: fixed the removal of appended
source files if the "delete source files" end-of-job action
is enabled.
* MKVToolNix GUI: chapter editor: when importing chapters from
DVDs the IETF BCP 47 language elements will be set, too, not
just the legacy language elements.
Build system changes:
* libEBML v1.4.2 and libMatroska v1.6.3 are now required. The
optional, bundled copies of both libraries have been updated
to those versions. This bump in requirements fixes several
heap overflow bugs in libEBML.
* MKVToolNix is now using the C++17 library feature "file
system library" instead of Boost's "file system" and "system"
libraries. For the GNU Compiler Collection (gcc) libstdc++
this means v8 or newer is required; for clang's libc++ it
means v7 or newer.
* Sat Jan 30 2021 Luigi Baldoni <aloisio@gmx.com>
- Update to version 53.0.0
New features and enhancements:
* mkvmerge: AVI reader: added support for reading the video
aspect ratio from the video properties header (`vprp` chunk)
if present and setting the display dimensions accordingly.
* mkvmerge: MP4 reader: for h.264/AVC tracks that don't have an
`AVCConfigurationBox` (`avcC` atom) in their sample
description (`stsd`) atom or whose `avcC` atom contains no
content `mkvmerge` will now re-derive the
`AVCConfigurationBox` from the bitstream.
* mkvextract: mkvextract will now check if any of the
destination file names is the same as the source file name
and abort with an error if that's the case.
* MKVToolNix GUI: when querying the user for a file name for
saving things (e.g. multiplexer settings or an attachment in
the header editor), the automatically suggested file name
will now be based on the situation-specific file names (e.g.
the destination file name for multiplexer settings or the
attachment's name when saving an attachment in the header
editor) instead of the directory's name.
* MKVToolNix GUI: multiplexer: when deriving track languages
from file names the GUI will now select the right-most match
instead of the left-most one. For example,
"La.vie.en.rose.(fr).srt" will now be detected as French (fr)
instead of English (en).
* MKVToolNix GUI: preferences: the items in the "pre-defined
…" lists can now be renamed by double-clicking with the
mouse or pressing the F2 key.
Bug fixes:
* mkvmerge: stretching chapter timestamps with
`--chapter-sync` now works correctly with floating point
values including fractions of floating point numbers (e.g.
`12.3/45.67`). The tooltips in the GUI have been adjusted
accordingly.
* mkvmerge: MPEG 1/2 video handling: the "default duration"
header field was often half the value it actually should be,
resulting in all video frames having an explicit block
duration with the correct value.
* mkvmerge: MPEG 1/2 video handling: the data stored in `Codec
private` and `Codec state` doesn't contain extensions other
than sequence & sequence display extensions anymore.
* mkvmerge: tag handling: when remuxing a Matroska file with
the `--no-track-tags`, existing `SOURCE_ID` track tags are
now skipped, too.
* MKVToolNix GUI: multiplexer: the drop-down boxes with
pre-defined track names now follow the order set in the
preferences instead of sorting the entries alphabetically.
* Tue Jan 05 2021 aloisio@gmx.com
- Update to version 52.0.0
New features and enhancements:
* MKVToolNix GUI: job queue: the maximum number of jobs to run
concurrently can now be increased in the preferences. The
default remains at 1.
* MKVToolNix GUI: the GUI will now add a context-specific
default extension to file names selected for saving on
platforms that don't add one itself (e.g. GNOME). For
example, when saving multiplexer settings the extension
`.mtxcfg` will be added.
* MKVToolNix GUI: added an option to the preferences for the
window to stay on top of other windows.
Bug fixes:
* mkvextract: h.265/HEVC extraction: the code for skipping
extraction of prefix SEI NALUs in the first frame was
skipping two bytes too few, resulting in broken processing
of all following bytes.
* libEBML: the optional, bundled version of libEBML was
updated to v1.4.1.
Build system changes:
* libEBML v1.4.1 is now required due to a bug in libEBML that
caused pointers to just-freed memory being returned to the
caller under certain invalid data constellations, causing
use-after-free errors in all of MKVToolNix's programs.
/usr/bin/ac3parser /usr/bin/base64tool /usr/bin/bluray_dump /usr/bin/checksum /usr/bin/diracparser /usr/bin/ebml_validator /usr/bin/hevcc_dump /usr/bin/pgs_dump /usr/bin/vc1parser /usr/bin/xyzvc_dump
Generated by rpm2html 1.8.1
Fabrice Bellet, Sat Nov 16 01:36:29 2024