libflashrom1-1.4.0-1.1 RPM for armv6hl

From OpenSuSE Ports Tumbleweed for armv6hl

flashrom is a utility for reading, writing, verifying and erasing flash ROM
chips. It's often used to flash BIOS/EFI/coreboot/firmware images in-system
using a supported mainboard, but it also supports flashing of network
cards (NICs), SATA controller cards, and other external devices which can
program flash chips.

Provides

• libflashrom1
• libflashrom.so.1
• libflashrom.so.1(LIBFLASHROM_1.0)
• libflashrom1(armv6hl-32)

Requires

• /sbin/ldconfig
• /sbin/ldconfig
• ld-linux-armhf.so.3
• ld-linux-armhf.so.3(GLIBC_2.4)
• libc.so.6
• libc.so.6(GLIBC_2.17)
• libc.so.6(GLIBC_2.28)
• libc.so.6(GLIBC_2.33)
• libc.so.6(GLIBC_2.4)
• libc.so.6(GLIBC_2.7)
• libftdi1.so.2
• libgcc_s.so.1
• libgcc_s.so.1(GCC_3.5)
• libjaylink.so.0
• libpci.so.3
• libpci.so.3(LIBPCI_3.0)
• libpci.so.3(LIBPCI_3.13)
• libpci.so.3(LIBPCI_3.5)
• libpci.so.3(LIBPCI_3.8)
• libusb-1.0.so.0
• rpmlib(CompressedFileNames) <= 3.0.4-1
• rpmlib(FileDigests) <= 4.6.0-1
• rpmlib(PayloadFilesHavePrefix) <= 4.0-1
• rpmlib(PayloadIsZstd) <= 5.4.18-1

License

GPL-2.0-only

Changelog

* Sat Jul 27 2024 Joshua Smith <smolsheep@opensuse.org>
  - Add doc and bash-completion subpackages
  - Update to 1.4.0:
    - Full changelog: https://www.flashrom.org/release_notes/v_1_4.html
* Fri Sep 22 2023 Adam Mizerski <adam@mizerski.pl>
  - Update to 1.3.0
    - See changelog at https://www.flashrom.org/Flashrom/1.3
  - Removed patches (merged upstream):
    - flashrom-install-man-file.patch
    - flashrom-j-link-spi.patch
* Sun Jul 24 2022 Michael Gorse <mgorse@suse.com>
  - Switch to meson
  - Add flashrom-install-man-file.patch: install the man file when
    using meson.
  - Add flashrom-j-link-spi.patch: Add missing meson option for
    J-Link SPI.
  - Drop fix_aarch64.patch: no longer relevant.
  - Package the library and headers.
* Thu Sep 09 2021 Andreas Schwab <schwab@suse.de>
  - Enable build on riscv64
  - Drop requires on dmidecode, no longer needed
* Fri Nov 27 2020 Guillaume GARDET <guillaume.gardet@opensuse.org>
  - Fix build on aarch64 with upstream patch:
    * fix_aarch64.patch
* Thu Feb 20 2020 Martin Hauke <mardnh@gmx.de>
  - Update to version 1.2
    - Meson support
    - Layout improvements/fixes and many, many code cleanups.
    - New chips: MX25U25635F, MX25L51245G, GD25Q256D, M95M02-A125,
      N25Q/MT25Q variants, W25Q128JW_DTR, AT25SF321, S25FL512S
    - New programmers: National Instruments USB-845x, Tin Can Tools
      Flyswatter/Flyswatter 2, STLINK V3, more Intel PCHs (Apollo
      Lake, Cannon Lake variants, Ice Lake U)
    - Reduced dependency on libusb0
    - Syntax: Added --flash-name and --flash-size arguments to print
      information about the flash chip
* Sun Jun 23 2019 Martin Hauke <mardnh@gmx.de>
  - Update to version 1.1
    New major user-visible features
    * 4-byte address support for many SPI programmers
    * New option to use a reference file for flash contents
      (--flash-contents)
    * Layout support for coreboot's FMAP format (--fmap, --fmap-file)
    * BAUD rate selection for Buspirate SPI
    * Support for the ENE Embedded Debug Interface (EDI), probably
      our first non-jedec SPI target
    * On Intel ME enabled systems, internal flashing is allowed by
      default
    New programmers
    * ENE Embedded Debug Interface EDI
    * Linux' MTD interface
    * Digilent SPI for the iCEblink40 development board
    * Developerbox/CP2104 bit banging
    * J-Link SPI
    * Dediprog firmwares >= 7.2.30
    * Dediprog SF200
    * Intel Kabylake PCHs
    Support for lots of new chips
* Sun Mar 31 2019 Martin Hauke <mardnh@gmx.de>
  - Update to version 1.0.1
    * linux_spi: Reduce maximum read chunksize
    * Hardcode default spispeed of 2MHz
      Default speed of kernel drivers isn't always sane (any more).
    * Fix dmi_match string for ThinkPad X201
    * verification with sparse layouts
    * Fix erasing of unaligned regions
* Wed Jan 03 2018 mardnh@gmx.de
  - Update to version 1.0
    * Support layouts for read and erase commands
    * New command line switch --noverify-all (-N) allows flashing of
      individual regions without reading the whole flash chip
      (particular useful with locked down Intel ME firmware)
    * New command line switch --ifd to read the layout from an
      Intel Firmware Descriptor on flash
    * We got rid of the delay-loop calibration (if the OS provides an
      accurate timer through clock_gettime())
    * Reading speed of USB programmers should have increased (reading
      bigger chunks at once, we reduce the overhead)
    * Support Intel 100 series PCHs (Sunrise Point, coupled with
      Skylake and Kaby Lake) and C620 series PCHs (Lewisburg paired
      with Workstation/Server versions of the former)
    * New programmers
      + Intel 100 series / C620 series PCHs
      + Intel I210 NICs (EEPROM and SPI)
      + AMD Merlin Falcon (FP4)
    * New chips
      + W25Q128.W
  - Specfile cleanup
  - Verify source signature
* Wed Apr 26 2017 agraf@suse.com
  - Enable build for ARM

Files

/usr/lib/libflashrom.so.1
/usr/lib/libflashrom.so.1.0.0

Generated by rpm2html 1.8.1

Fabrice Bellet, Wed Oct 2 01:18:47 2024