| Index | index by Group | index by Distribution | index by Vendor | index by creation date | index by Name | Mirrors | Help | Search |
| Name: libscamperfile-devel | Distribution: openSUSE Tumbleweed |
| Version: 20240920 | Vendor: openSUSE |
| Release: 1.1 | Build date: Mon Sep 23 09:17:26 2024 |
| Group: Development/Libraries/Other | Build host: reproducible |
| Size: 113643 | Source RPM: scamper-20240920-1.1.src.rpm |
| Packager: http://bugs.opensuse.org | |
| Url: https://www.caida.org/catalog/software/scamper/ | |
| Summary: Development headers for scamper's binary dump file access library | |
Scamper is a program that is able to conduct Internet measurement tasks to large numbers of IPv4 and IPv6 addresses, in parallel, to fill a specified packets-per-second rate. Currently, it supports the well-known ping and traceroute techniques, as well as MDA traceroute, alias resolution, some parts of tbit, sting, and neighbour discovery. This package contains development headers and other ancillary files for the libscamperfile library.
GPL-2.0-only
* Mon Sep 23 2024 Sebastian Wagner <sebix@sebix.at>
* update to version 20240920:
* scamper:
* add -O noring to disable use of ring buffer on Linux when
scamper is configured with --enable-scamper-ring
* udpprobe: add -S src parameter, update manual page with
previously supported but undocumented options
* sc_prefixprober:
* allow do-not-probe list to be embedded in the input set of
prefixes to probe, update manual page.
* add -v to emit version of scamper release the sc_prefixprober
utility came from
* Python module:
* add src parameter to ScamperCtrl.do_udpprobe
* update to version 20240916:
* scamper:
* with ping -F 0 and trace -s 0, choose a different TCP or UDP source
port if an otherwise available source port has been used in the past
5 seconds to the same destination IP and port.
* ping: add udp-sport probe method
* ping: refactor udp packet matching on datalink sockets
* allow -D when outputting to a file.
* use SO_TIMESTAMP on linux packet sockets, rather than call an ioctl,
to fix buggy linux timestamps when not using ring
* rework privsep code to be signal aware, and forward signals from
scamper's privileged process to scamper's unprivileged process via
the socketpair between the processes. i.e.,
scamper -D -U /path/to/scamper-unix-socket -e /path/to/scamper.pid
kill -HUP `cat /path/to/scamper.pid`
now works. TERM and INT also propagate from privileged to
unprivileged process. this allows the user that started scamper to
send signals to the privileged process, which it then forwards to
unprivileged process. the user who started scamper is otherwise not
able to send the unprivileged process signals, as that process
typically runs as user nobody.
* host: add -O nsid to signal queried server to include nsid OPT
record in response. parse any server-provided OPT records.
* udpprobe: record ifname replies were received on
* udpprobe: increase supported probe size from 1000 to 1400 bytes.
* factor out most repeated tls code patterns into utils_tls.c
* add functions to utils_tls.c to load key material from opened
file descriptors, to allow key material to be reloaded in
unprivileged process
* reload TLS key material on HUP signal
* do not negotiate use of TLS v1.1
* refactor privsep code to make it obvious which functions belong to
which process, and develop an obvious pattern in the code.
* make route socket interface work on NetBSD again
* tracelb: fix sport validation
* other minor code cleanups
* sc_minrtt:
* thread input stage, add batch import. by default, sc_minrtt
will import N files per batch, where N is the number of processors
online.
* add -b batchc parameter that allows for batch size to be adjusted
according to what is appropriate for the system
* set exit status to zero when import is successful
* add -v to emit version of scamper release the utility came from
* refactor code in places
* libscamperfile:
* bump version to account for added interfaces for udpprobe, host
objects.
* Python module:
* add nsid option to ScamperCtrl.do_dns method
* add ScamperUdpprobeReply.ifname attribute
* add OPT glue to ScamperHost, and related features
(udpsize, edns_version, edns_do attributes)
* add context manager support to ScamperFile and ScamperCtrl, allowing
for Python with / as syntax
* sc_bdrmap:
* change -v vp-ases option to -V vp-ases
* add -v to emit version of scamper release the utility came from
* sc_attach, sc_hoiho, sc_remoted:
* add -v to emit version of scamper release the utility came from
* sc_wartsdump:
* update for new udpprobe, host features.
* tests:
* add unit_cmd_tracelb, contributed by Marcus Luckie.
* add unit_ping_lib, check scamper_ping_reply_is_from_target
* add unit_host_warts, check OPT record reading and writing.
* expand unit_dl_parse_ip tests
* documentation:
* update python module documentation to reflect changes
* update scamper, sc_attach, sc_bdrmap, sc_hoiho, sc_minrtt,
sc_pinger, sc_remoted manual pages to reflect changes
* Mon Aug 19 2024 Steve Kowalik <steven.kowalik@suse.com>
- Remove upper bound on Cython, Cython 3 appears to be supported.
* Sat Aug 17 2024 Sebastian Wagner <sebix@sebix.at>
- update to version 20240716:
* scamper
* add -O dl-any option to scamper, which causes scamper to open a
cooked datalink interface bound to "any" on Linux. Note that
scamper's implementation of -O dl-any currently prevents
transmission of packets on the datalink socket, but this will
change in the future.
* add -O dyn-filter option to scamper, which causes scamper to
dynamically adjust the BPF filter that it configures on a datalink
socket according to TCP/UDP ports that scamper is using. this
option is only available on Linux, and BSD systems with BIOCSETFNR
(FreeBSD and MacOS). note that both -O dyn-filter and -O dl-any
cannot currently be used at the same time, but this will change in
the future.
* only raise SO_SNDBUF and SO_RCVBUF; some systems (e.g. Linux)
already have larger socket buffers than scamper's defaults.
* add -O sockrx to ping, to force ping to receive ICMP responses over
a regular socket, even when using -O dl (which still records datalink
transmit timestamps).
* speed up receiving on datalink sockets by avoiding unnecessary
memsets and removing unused fields, and adjust BSD, Linux, DLPI code
to follow similar code patterns.
* consider both directions for TCP packets on datalink sockets,
allowing datalink transmit timestamps to be recorded for non TCP-syn
packets.
* avoid processing duplicate copies of the same packet on Linux
loopback interface with datalink sockets.
* remove "observe" functionality from scamper control socket, as
signalled over a year ago. "outfile" and "source" will be removed
from the control socket in the future.
* cleanup scamper_dlhdr.[ch], use scamper_dlhdr_t to scamper_probe_t
instead of its constituent parts.
* update tbit usage statement in scamper, and manual page, with
currently supported options
* python module:
* use join to assemble command strings for all ScamperCtrl.do_*()
for orders of magnitude faster command generation
* implement __richcmp__ for all classes where __eq__, __lt__, etc,
were previously defined individually
* if string passed to ScamperAddr is invalid, raise an exception
* implement ScamperCtrl.do_tbit method, ScamperTbit classes
* sc_minrtt:
* add sc_minrtt utility, which takes the output of sc_pinger to
produce a minimized RTT input file for sc_hoiho. to build, pass
- -enable-sc_minrtt as well as --with-pcre or --with-pcre2 to
configure, and have sqlite3 development headers and libraries in
build environment.
* tests:
* more ping and tbit command unit tests
* split out ARP reply parsing code into dl_parse_arp, add fuzzing cradle.
- update to version 20240725:
* scamper:
* add dynamic BPF filters for linux "any" packet interface, allowing
both -O dyn-filter and -O dl-any.
* avoid generating debugging statements that won't be emitted, saving
CPU in the usual scamper operating mode.
* process dltx timestamps when -N > 1 and tx timestamp is available
after the response has already arrived
* don't allow TCP traceroute and -N > 1 because packet matching
responses from the destination is challenging.
* use scamper_seteuid_[raise|lower] in scamper when built without
privsep, rather than use a repeated code pattern.
* configure:
* add --enable-scamper-ring to configure to make -O ring the default
* python module:
* take account of stop_hop when iterating through traceroute hops,
add ScamperTrace.stop_hop attribute.
* add ScamperTrace.addrs() convenience method, which returns unique
addresses observed in the path
* add ScamperHost.ans_ptrs() convenience method, which returns the
text from PTR records in a response
* update documentation:
https://www.caida.org/catalog/software/scamper/python/
* sc_analysis_dump:
* drop geolocation code from utility, which was not plumbed into
configure.
* tests:
* add check-ifdef.pl to check for obvious #ifdef bugs
- update to version 20240813:
* scamper:
* properly set icmp_id on ICMP probe signature in ping when -F 0.
* reduce code duplication in scamper_fd.c by replacing fd_udp() and
fd_tcp() with fd_tcpudp().
* process IPv6 TCP replies in dealias.
* simplify BPF logic, support unit testing of dl_filter_compile.
* fix 20240725 regression to actually call scamper_debug logic for
datalink packets.
* python module:
* raise exception if ScamperCtrl.do_*() is called on a ScamperInst
that has signalled EOF.
* add ScamperInst.is_eof() method.
* configure:
* check for tcp_timer.h in configure, use if found, to fix check
for tcp_var.h.
* sc_pinger, sc_minrtt:
* support batch probing with radargun primitive.
* update sc_pinger manual page with batch probing details.
* tests:
* silence benign clang static analysis warnings.
* add more ping command unit tests.
* add unit_dl_filter_compile to test bpf compiler.
* enhance check-ifdef.pl to find #define / #ifdef ordering issues,
make pass through code to adjust header ordering.
* Mon May 13 2024 Dominique Leuenberger <dimstar@opensuse.org>
- Fix dependency of libscamperfile-devel: require the new
libscamperfile9. The last updated bumped the so-version, which
results in a different package name.
- Drop all obsoletes of libscamperfile9: obsoleting old library
packages is explicitly not to be done according to the packaging
guidelines around shared libraries.
* Sun May 05 2024 Sebastian Wagner <sebix@sebix.at>
* update to version 20240503:
* scamper:
* improvements with -N squeries; let -Q send all probes when using -N.
add -H wait-probe-hop, which specifies the minimum delay between
probes with the same TTL. identify the hop that would have caused
traceroute to stop when not using -N so that a normal traceroute
path with one hop representing the destination or stopping hop in
the path is rendered. in the json output, put extra hops beyond
the stopping hop into a extra_hops array.
* make ring-nolocked the default when using -O ring.
* improvements with udpprobe: provide ability to send multiple copies
of the same payload, add json output, reuse available UDP sockets
where possible.
* consistently set and record the IPv4 tos and IPv6 tclass fields for
both ping and trace.
* fix warts.bz2 and warts.xz output, which could previously use all
available space on the file system.
* speed up rendering of byte arrays as hex in json output.
* fix obtaining IPv6 hoplimit on received packets on MacOS.
* record the name of the interface that received IPv4 and IPv6 ICMP
responses in ping.
* add TXT queries to host command; add chaos query class; add
DNS-over-TCP.
* fix use of ctype functions according to netbsd (cast all parameters
to unsigned char). make pass through use of ctype functions to do
ctype function calls last in most logical statements.
* cleanup scamper_file_warts.h so that only necessary struct
definitions are in that header.
* libscamperfile:
* add new functions, bump library version due to udpprobe changes.
* python library
* improve the usefulness of the ScamperInstError exceptions
* let all address parameters to do_() methods also be ScamperAddr
* support creation of ScamperAddr from bytes objects
* updates to support new functionality in udpprobe primitive
* support RR filters on all sections of a DNS response
* add tx, rx, and rtt attributes to DNS responses
* add qtype=txt, qclass=chaos, tcp DNS queries, and ScamperHostTxt
class.
* add helper method to get ns and txt records out of ans section
- - ans_nses() and ans_txts()
* add rx and ifname attributes to ScamperPingReply
* add ScamperDealiasProbe.is_from_target() method
* configure:
* remove obsolete AC_PROG_GCC_TRADITIONAL
* fix net/pfvar.h conditional
* sc_hoiho:
* fix crashes in IP and FNU stages so that router name regular
expression inferences work again.
* sc_wartscat:
* fix index into infiles array
* tests:
* add tests for string_byte2hex, and json escaping
* add unit tests for TXT records
* add fuzzing cradle for host_rr_list
* in fuzz_cmd cradle, ensure any error strings only contain printable
characters.
* Sat Mar 16 2024 Dirk Müller <dmueller@suse.com>
- update to 20240229:
* bugfix: correct SCAMPER_DL_IS_ICMP_TIME_REPLY macro so that scamper
does not ignore ICMP replies quoting TCP/UDP packets for 1/256
source port values.
* bugfixes for -O icmp-rxerr: handle EPOLLERR on linux, try using
IPV6_RECVHOPLIMIT before IPV6_HOPLIMIT for IPv6 udp probing.
* bugfix: fix possible assertions in dealias, trace, and tracelb code.
* ping: count UDP replies as from the target
* trace: correct datalink timestamp adjustments
* add more specific error messages when a scamper command is not
accepted, return them over control socket or terminal, as appropriate.
* scamper_fd_t: refactor fd_addr, fd_sport, fd_dl, fd_ifindex
* scamper_fd_t: decouple udp4raw/udp4dg from each other. use udp4dg
and udp6 sockets in udpprobe primitive, rather than have each
udpprobe task create its own socket.
* scamper_fd_t: add methods that return an available open socket for
probing a given destination without blocking if another task is
probing the same destination. use this with ping -F 0 and trace -s 0,
instead of generating random port values, so that scamper opens
the minimum number of file descriptors.
* ping and trace: have -O dl mean to capture transmit and receive
timestamps from a datalink interface. add -O raw option so that
IPv4 TCP probes can be transmitted over a raw socket, to allow transmitted
TCP packets to be observed on the datalink interface.
* add memory-mapped ring buffer support (PACKET_RX_RING) for receiving
packets on datalink sockets on Linux. enable at scamper runtime
with -O ring. contributed by Alistair King.
[#]# python module:
* generate module .c with Cython 0.29.37, to enable module to compile
with Python 3.11.
* link against libpython
* have all time parameters take either a timedelta or float/int. float/int
parameters are all seconds.
* add ScamperInstError exception which identifies the scamper instance
and includes the error string returned by the instance.
* reduce copying in methods that return bytes objects
* add str method for ScamperInst
- reenable python build
* Tue Feb 06 2024 Sebastian Wagner <sebix@sebix.at>
- Temporarily disable Python build because of incompatibility with Python 3.11
Reported upstream, will be fixed in next version.
* Mon Feb 05 2024 Sebastian Wagner <sebix@sebix.at>
- Update to version 20240122:
* scamper
* fix regression in 20240117 where trace -W 0 (probe as soon as
there's a response) was not accepted, despite being the default.
add unit test for this.
* for trace, improve probe and reply matching of UDP packets
* fix printing UDP responses to traceroute probes in scamper -O text output
* for trace section of scamper.1 man page, document -O const-payload,
and expand documentation for -O dl.
* python module:
* ship scamper release with a the C source code pre-generated for the
python module, so that the build process does not require a cython
installation. bootstrap.pl will build the C source code unless told
not to via --without-cython
* rename ScamperPing.reply_count to ScamperPing.stop_count, as the
reply_count attribute meant something different on a ScamperPing
object than what it means with ScamperDealiasProbe, etc
* sc_remoted:
* expand sc_remoted.1 manual page with information about validating
scamper client TLS certificates, and how to use -M monitor-name.
* Wed Jan 17 2024 Sebastian Wagner <sebix@sebix.at>
- update to version 20240117:
- scamper:
- fix crashes if a task is provided an apparent response, but the task
- has not yet sent a packet in ping, sting, tbit, trace, tracelb.
- find and fix memory leaks in measurement command parsing code via
- fuzzing.
- add udpprobe, http, dealias -m midarest, and dealias -m midardisc methods.
- udpprobe and http do not currently have json output methods.
- remove -d dport, -s sport, and -t ttl dealias parameters. these
- were only valid for mercator, and can be specified in a probedef instead.
- record size of responses for dealias probes.
- modify all commands to be able to take human-friendly wait parameters --
- e.g. trace -W 0.5s or trace -W 500ms instead of trace -W 50000.
- support transmitting raw packets on linux ppp interfaces
- add -b payload-size parameter to ping
- python interface:
- add python interface to most of scamper. building this module requires
- cython < 3.0. to build, use something like:
- PYTHON=/path/to/python CYTHON=/path/to/cython ./configure --with-python
- the documentation for this interface is available at
- https://www.caida.org/catalog/software/scamper/python/
- the ubuntu PPA provides python3-scamper, and the FreeBSD port should
- hopefully provide py-scamper shortly. these sources may be useful
- for getting the module packaged for other operating systems.
- https://launchpad.net/~matthewluckie/+archive/ubuntu/scamper
- libscamperfile and libscamperctrl:
- improvements, bump versions
- tests:
- many new unit tests and fuzzing cradles for scamper components
- sc_pinger:
- add -l limit and -M move-dir options
- sc_remoted:
- no need to link against libscamperfile, remove dependency
- sc_attach, sc_filterpolicy, sc_prefixscan, sc_wartsfix:
- compile / link on windows.
* Fri Nov 10 2023 Dirk Müller <dmueller@suse.com>
- update to 20230614d (bsc#1217032):
* fix buffer overflow when parsing TCP packets where the sender
includes a TCP fast open cookie larger than 16 bytes
* Sat Oct 07 2023 Sebastian Wagner <sebix@sebix.at>
- update to version 20230614c:
- scamper:
* fix compile-on-windows support; use icmp-echo probes instead of UDP
probes for traceroute on windows; provide "attach" support on
windows.
* fix compile-on-FreeBSD-15+ where pf firewall does not have
DIOCGETSTATUS ioctl
* in scamper's remote control (-R option), fix file descriptor leak
when unable to reconnect to the remote controller.
* add --disable-scamper-trace --disable-scamper-ping
- -disable-scamper-tracelb --disable-scamper-dealias
- -disable-scamper-tbit --disable-scamper-sting
- -disable-scamper-sniff --disable-scamper-host configure options
to build scamper without specific measurement capabilities.
- sc_attach:
* add windows support
* Sun Aug 13 2023 Sebastian Wagner <sebix@sebix.at>
- update to version 20230614b:
- scamper:
* fix handling of EPOLLHUP on client disconnection -- Linux-specific
(scamper -U /path/to/socket)
- libscamperctrl:
* fix handling of disconnected instances
* Wed Aug 09 2023 Sebastian Wagner <sebix@sebix.at>
- update to version 20230614a
* configure:
* better tests for zlib, libbz2, and liblzma that check for both
libraries and headers.
* change --with-sc_uptime, --with-sc_hoiho, and --with-tests to be
- -enable-sc_uptime, --enable-sc_hoiho, and --enable-tests
* disable maintainer mode, pass foreign to AM_INIT_AUTOMAKE
* scamper:
* remove reading regular files from poll/select/epoll/kqueue path,
which fixes reading regular input files (-f option to scamper) using
epoll or kqueue
* fix reading stdin as input (-f option to scamper) when using
epoll (catch EPOLLHUP)
* add DNS server to host signature, add host path for scamper_task_find
* rework scamper_osinfo to work with malformed release names (uname -r)
* dealias: do not crash on malformed prefixscan and bump commands
* dealias: fix memory leak of probedefs on malformed commands
* sting: fix memory leak of recorded packets
* remove tsps input method (-O tsps option to scamper)
* update manual page
* libscamperctrl:
* link against list.o and splaytree.o so that the library is self-contained
* fix memory leak when task is not accepted
* API improvements
* libscamperfile:
* fix memory leak when reading SOA/MX from warts file
* fix memory leak when reading PMTUD traceroute structures from warts file
* sting: fix memory leak of recorded packets
* sc_analysis_dump, sc_warts2pcap, sc_wartscat, sc_wartsfilter:
* link against list.o/utils.o so that these utilities are not reliant on
those symbols being exported from libscamperfile
* sc_prefixprober:
* allow compression type to be specified using -O
* free scamper_addr_t as each are removed from the list to probe
* sc_remoted:
* catch EPOLLHUP with epoll
* sc_warts2text:
* fix memory leaks
* sc_wartsdump:
* fix memory leaks
* link against utils.o so that sc_wartsdump is not reliant on those
symbols being exported from libscamperfile
* Tue Jun 13 2023 Sebastian Wagner <sebix@sebix.at>
- update to version 20230605:
* HEADSUP: if you previously used -e pidfile to record the pid of a
running scamper process, there is a good chance that the pidfile is
owned by root. scamper now attempts to write this file using the uid
that started scamper, and will not be able to write it if scamper is
not started by root (it should not be, rather the scamper binary
should be setuid root). Please delete the existing pidfile, or change
its ownership, prior to restarting scamper, or scamper will not start.
* scamper:
* write a process ID that the user that started scamper can kill
in the pidfile when using privsep.
* when using privsep, exit the unprivileged process if the privileged
process exits (is killed)
* run as real uid from the start of scamper, for both privsep and
not-privsep.
* fix bug where attempting to open an unsupported datalink would
leave a freed scamper_fd_t in the fd_tree and fd_list, leading to
a crash.
* fix double free triggered when a user provides an invalid dealias
command.
* fix memory leak if the payload was specified twice to ping or trace
* rework pollfunc selection logic, use kqueue/epoll by default.
* remove _malloc_options = "AJ" as this only works on unsupported
versions of FreeBSD.
* add additional paramaters to attach command to allow the user
to override list and cycle parameters, documented in manual page.
* catch EAGAIN/EINTR from select/kqueue/epoll to allow gdb to attach
and detach without flagging errors.
* for DNS replies for host command, record reply flags and rcode.
* add support for SOA and NS queries in host.
* add a JSON output for host measurements.
* do not let scamper emit warts to a tty. check for isatty in
configure.
* only allow -O and -z to be specified multiple times in a trace command
* only allow -O to be specified multiple times in a ping command
* split command parsing logic out from task probing logic. add
fuzzing cradle for parsing logic for all measurement types, and
basic unit tests for dealias, ping, and trace parsing logic.
* autodetect output type by file extension if output type is not
explicitly specified on the command line.
* libscamperfile:
* remove all struct definitions from libscamperfile (e.g.
scamper_trace, scamper_ping, scamper_addr, etc). provide typedefs
for each (scamper_trace_t) and _get() functions that return the
field requested. This change will allow hopefully allow
libscamperfile's version to stabilize. all scamper utilities now
use these get functions.
* shift some functions that were previously implemented in
libscamperfile into the one place they were used, if they were only
used in (for example scamper / sc_analysis_dump / other scamper
utility). delete other functions that were not used anywhere in
the public scamper release.
* libscamperctrl:
* fix bug by ensuring line_off is always valid after the read.
* catch EAGAIN from select.
* add kqueue support.
* add scamper_attp_* routines to allow applications to specify
list and cycle parameters.
* for scamper_inst_do, take a parameter to keep with each task.
* add scamper_task_getparam function to get the parameter.
* add scamper_task_getcmd function to get the command associated with a task.
* use TYPE_FATAL instead of TYPE_ERR in application callback when
scamper_inst_read encounters a fatal error, only use TYPE_ERR when
scamper does not accept a command.
* sc_prefixprober:
* new driver to conduct measurements (ping, trace, tracelb) to an
address in each prefix.
* sc_ally:
* use scamper_file_t outfiles, add ability to write gz/bz2/xz files.
* ask for cycle-start and cycle-stop records, write them out.
* improve use of libscamperctrl.
* sc_hoiho:
* add support for VP geohints, document.
* silence -Wshadow.
* silence warnings related to assignments that are not used.
* sc_ipiddump:
* fix memory leak when user specifies invalid command line options.
* sc_filterpolicy:
* ask for cycle-start and cycle-stop records, write them out.
* improve use of libscamperctrl.
* sc_pinger:
* signal done to get cycle stop record.
* improve use of libscamperctrl.
* document remote socket option.
* sc_prefixscan:
* use scamper_file_t outfiles, add ability to write gz/bz2/xz files.
* ask for cycle-start and cycle-stop records, write them out.
* improve use of libscamperctrl.
* sc_remoted:
* catch EAGAIN from select.
* sc_speedtrap:
* ask for cycle-start and cycle-stop records, write them out.
* improve use of libscamperctrl.
* sc_uptime:
* silence -Wshadow.
* silence warnings related to assignments that are not used.
* fix memory leak in up_reboots_doone.
* sc_warts2json:
* fix memory leak with cycle start/stop records.
* emit json for host records.
* sc_wartscat:
* fix ability to write compressed warts files.
- update to version 20230323:
* libscamperfile:
* add ability for scamper and all utilities to read warts and arts
files compressed with bzip2 and xz, if libbz2 and liblzma are found
by configure.
* add ability for scamper and all utilities to write warts files
compressed with gzip, bzip2, and xz, if zlib, libbz2, and liblzma
are found by configure.
* tidy up libscamperfile code.
* misc:
* silence -Wsign-compare and -Wtype-limits
* tidy usage statements for sc_uptime and sc_tbitpmtud
* document use of '-' to read from stdin and write to stdout
in sc_wartsfilter.1
* Tue Mar 07 2023 Sebastian Wagner <sebix@sebix.at>
- Update to version 20230302:
- scamper:
* use a random source port / ICMP ID in trace if -s 0.
* better parallelize pings to a single destination that use
udp-dport, tcp-ack-sport, or tcp-syn-sport probe methods.
* document default value of source port consistently for all
measurements that take a source port parameter in the man page.
- sc_wartscat:
* print useful error messages when encountering an error.
* add ability to merge neighbourdisc, tbit, sting, sniff, and host.
* Fri Feb 24 2023 Sebastian Wagner <sebix@sebix.at>
- Update to version 20230224:
- scamper:
- allow multiple parallel measurements to the same destination,
- provided the measurements have probe signatures that scamper can
- distinguish.
- return the associated task ID with each DATA blob in control socket.
- this task ID matches the ID returned in an OK when scamper accepted
- the task.
- in ping, only compute delay statistics on responses from destination.
- in ping, allow timeout to be expressed in fractions of a second.
- libscamperfile:
- support reading gz-compressed warts files.
- libscamperctrl:
- add libscamperctrl, a library to interact with a collection of
- scamper instances.
- modify sc_ally, sc_filterpolicy, sc_prefixscan, sc_speedtrap, and
- sc_pinger to use this library.
- this library is likely to evolve. current behaviour is documented
- in libscamperctrl manual page.
- misc:
- improve sc_wartsfilter manual page with examples.
- add remote control socket support to sc_pinger.
- fix kqueue/epoll loop in sc_remoted.
- consistently use size_t throughout when counting number of items.
- build without warnings using -Wextra -Wno-unused-parameter.
- improvements through adding function attributes to printf-like
- functions.
- deorbit some unused functions from utils.c.
* Thu Dec 29 2022 Sebastian Wagner <sebix@sebix.at>
- Update to version 20211212e:
- scamper:
* gracefully handle situations where there is no
/etc/resolv.conf, or no nameserver lines in an /etc/resolv.conf
but a measurement or scamper-internal task wants to resolve a
name
* tidy up buggy prinf-like statements in scamper and some drivers.
- warts/json:
* in JSON output for ping, print the TCP/UDP src/dst ports or
ICMP id/seq used in individual probe packets,
* fix regression in libscamperfile so that it can read old warts
files.
* Sat Nov 19 2022 Sebastian Wagner <sebix@sebix.at>
- Update to version 20211212d:
- scamper:
* add tcp-syn-sport method to ping, document in scamper(1) manual page
- documentation:
* document trace json object in sc_warts2json(1) manual page
* Thu Aug 18 2022 Sebastian Wagner <sebix@sebix.at>
- Update to version 20211212b:
- scamper:
* add an option (-O cafile=/path/to/file) to load CA certificates
from a specific file when starting scamper for validating a
remote controller's certificate (this was released in 20211212a)
* add options
- O client-certfile=/path/to/certfile and
- O client-privfile=/path/to/privfile
to have scamper present a client certificate during a TLS handshake
with a remote controller
* fix bugs that prevent scamper from reconnecting to a remote
controller
* fix -d debugfile when scamper is built with privilege separation
* fix bug when writing neighbordisc measurements to warts file that
prevents a neighbordisc measurement from being read
* fix bug when reading some tracelb measurements with unresponsive hops
from a warts file
* allow user to specify fractions of a second to ping timeout (-W)
* use a random source port / ICMP ID in ping if -F 0
- sc_remoted:
* add -C option to specify a CA PEM file to verify client certificates
presented by scamper instances.
* add -O skipnameverification option to tell sc_remoted to verify
scamper presents a certificate signed by the CA, but do not do
name verification
* Mon Apr 25 2022 Dominique Leuenberger <dimstar@opensuse.org>
- Drop libscamperfile1 provides from the lib subpckage:
libscamperfile.so.2 is not a drop-in replacement for anything
that linked libscamperfile.so.1, and as such the provides is
invalid. The obsoletes is technically wrong, but is there to fix
the upgrade path of a wrongly-packaged libscamperfile.so.2 in a
libscamperfile1 package.
* Fri Feb 25 2022 Sebastian Wagner <sebix@sebix.at>
- add provices/obsoletes for old libscamperfile1 sub-package.
* Sat Feb 12 2022 Sebastian Wagner <sebix@sebix.at>
- Update to version 20211212a:
- No changelog available.
* Tue Dec 14 2021 Sebastian Wagner <sebix@sebix.at>
- update to version 20211212:
- scamper:
* in hostname code, handle nameserver lines with comments in them
- sc_remoted:
* fix logic to handle TLSv1.3 handshakes
- sc_hoiho:
* add the ability to learn regular expressions that extract
network names from router hostnames, documented in the
sc_hoiho man page
* Wed Oct 27 2021 Sebastian Wagner <sebix@sebix.at>
- update to 20211026:
scamper:
* in trace, allow probes to multiple consecutive hops to be
outstanding in the network without having to stop and wait,
using the -N parameter documented in scamper's man page.
* in trace, do optional PTR lookups using the option documented
in scamper's man page. output these hostnames into warts and
json outputs.
* bump libscamperfile version for the above changes.
* document that scamper's control socket can be told to return
JSON through an option now documented in scamper's man page.
* improvements to reading warts files via fuzzing.
* other man page tidy ups.
sc_erosprober:
* add the ability to adjust the probe list at run time through a
unix domain socket, documented in the sc_erosprober man page.
sc_hoiho:
* add the ability to learn regular expressions that extract
geographic hints from router hostnames, documented in the
sc_hoiho man page
* Mon Apr 05 2021 Sebastian Wagner <sebix@sebix.at>
- update to version 20210324:
sc_speedtrap:
* speed up speedtrap's runtime
/usr/include/scamper_addr.h /usr/include/scamper_dealias.h /usr/include/scamper_file.h /usr/include/scamper_host.h /usr/include/scamper_http.h /usr/include/scamper_icmpext.h /usr/include/scamper_list.h /usr/include/scamper_neighbourdisc.h /usr/include/scamper_ping.h /usr/include/scamper_sniff.h /usr/include/scamper_sting.h /usr/include/scamper_tbit.h /usr/include/scamper_trace.h /usr/include/scamper_tracelb.h /usr/include/scamper_udpprobe.h /usr/lib/libscamperfile.so /usr/share/man/man3/libscamperctrl.3.gz /usr/share/man/man3/libscamperfile.3.gz
Generated by rpm2html 1.8.1
Fabrice Bellet, Sat Nov 16 01:07:39 2024