boomaga-3.0.0-3.3 RPM for riscv64

From OpenSuSE Ports Tumbleweed for riscv64

Boomaga (BOOklet MAnager) is a virtual printer for viewing a document
before printing it out using the physical printer.
Select the "Boomaga" printer in any program and the Boomaga window
opens in several seconds (CUPS takes some time to respond).
If you print out one more document, it gets added to the previous one,
and you can also print them out as one.
Regardless of whether your printer supports duplex printing or not, you
would be able to easily print on both sides of the sheet.

Provides

• boomaga
• application()
• application(boomaga.desktop)
• boomaga(riscv-64)

Requires

• /bin/sh
• /bin/sh
• /usr/sbin/lpadmin
• /usr/sbin/lpadmin
• ghostscript
• ld-linux-riscv64-lp64d.so.1()(64bit)
• ld-linux-riscv64-lp64d.so.1(GLIBC_2.27)(64bit)
• libQt5Core.so.5()(64bit)
• libQt5Core.so.5(Qt_5)(64bit)
• libQt5DBus.so.5()(64bit)
• libQt5DBus.so.5(Qt_5)(64bit)
• libQt5Gui.so.5()(64bit)
• libQt5Gui.so.5(Qt_5)(64bit)
• libQt5PrintSupport.so.5()(64bit)
• libQt5PrintSupport.so.5(Qt_5)(64bit)
• libQt5Widgets.so.5()(64bit)
• libQt5Widgets.so.5(Qt_5)(64bit)
• libc.so.6()(64bit)
• libc.so.6(GLIBC_2.27)(64bit)
• libc.so.6(GLIBC_2.33)(64bit)
• libc.so.6(GLIBC_2.34)(64bit)
• libc.so.6(GLIBC_2.38)(64bit)
• libcups.so.2()(64bit)
• libgcc_s.so.1()(64bit)
• libgcc_s.so.1(GCC_3.0)(64bit)
• libgcc_s.so.1(GCC_3.3.1)(64bit)
• libgcc_s.so.1(GCC_3.4)(64bit)
• libm.so.6()(64bit)
• libm.so.6(GLIBC_2.27)(64bit)
• libpoppler-cpp.so.1()(64bit)
• libstdc++.so.6()(64bit)
• libstdc++.so.6(CXXABI_1.3)(64bit)
• libstdc++.so.6(CXXABI_1.3.5)(64bit)
• libstdc++.so.6(GLIBCXX_3.4)(64bit)
• libstdc++.so.6(GLIBCXX_3.4.11)(64bit)
• libstdc++.so.6(GLIBCXX_3.4.18)(64bit)
• libstdc++.so.6(GLIBCXX_3.4.20)(64bit)
• libstdc++.so.6(GLIBCXX_3.4.21)(64bit)
• libstdc++.so.6(GLIBCXX_3.4.29)(64bit)
• libstdc++.so.6(GLIBCXX_3.4.32)(64bit)
• libstdc++.so.6(GLIBCXX_3.4.9)(64bit)
• libz.so.1()(64bit)
• rpmlib(CompressedFileNames) <= 3.0.4-1
• rpmlib(FileDigests) <= 4.6.0-1
• rpmlib(PayloadFilesHavePrefix) <= 4.0-1
• rpmlib(PayloadIsZstd) <= 5.4.18-1

License

GPL-2.0-only AND LGPL-2.1-or-later

Changelog

* Wed Feb 10 2021 Christophe Giboudeaux <christophe@krop.fr>
  - Require zlib explicitly
  - Spec cleanup
  - Remove obsolete macros in %post/%postun
  - Switch to cmake() syntax for Qt requirements
* Tue Aug 25 2020 Callum Farmer <callumjfarmer13@gmail.com>
  - Fixes for %_libexecdir changing to /usr/libexec (bsc#1174075)
* Mon Apr 08 2019 Kyrill Detinov <lazy.kent@opensuse.org>
  - Update to 3.0.0.
    * A new backend that works more reliably in modern distributions.
    * Added support for Wayland sessions.
    * Support for Postscript input files.
    * Simplification of the program structure, reduced the number of
      executable files.
    * Faster processing of large PDF files.
    * SELinux support.
    * Some GUI improvements.
    * Updated translations.
* Thu Apr 26 2018 lazy.kent@opensuse.org
  - Update to 1.3.0.
    * Added support for RightToLeft page layouts.
    * Some GUI improvements.
    * Updated translations.
* Thu Apr 05 2018 lazy.kent@opensuse.org
  - Update to 1.2.0.
    * Fix: The program shows empty page if page contents is a link to
      the array.
    * Fix In some cases, the program chose an incorrect value of the
      DISPLAY variable.
    * Fix: More accurate handling of comments in the file.
    * Updated translations.
* Fri Jan 05 2018 lazy.kent@opensuse.org
  - Update to 1.1.0.
    * Fix: Sometimes the backend has incorrectly defined environment
      variables.
    * Fix in cmake: Allow to use system build flags.
    * Fix: Install correct values in boomaga.ppd.
    * Updated translations.
* Mon Dec 11 2017 lazy.kent@opensuse.org
  - Update to 1.0.0.
    * Previously, the program used private methods from poppler.
      This caused a lot of problems. Now the program uses its own parser,
      written from scratch.
    * Add “Flip on long edge” and “Flip on short edge” options in
      the printer preferences dialog.
    * Improved display and print for some not quite correct PDF files.
    * Fix: typos.
    * Updated translations.
* Fri Jul 14 2017 lazy.kent@opensuse.org
  - Build against Qt5 for SLE 12.
* Mon Jul 10 2017 lazy.kent@opensuse.org
  - Update to 0.9.1.
    * Fix: When building with Qt5, the program creates incorrect
      directory for temporary files.
    * Fix: typos.
    * Updated translations.
  - Build against Qt5 for Factory.
* Tue Apr 04 2017 lazy.kent@opensuse.org
  - Update to 0.9.0.
    * Add grayscale printing option.
    * Add an option to print the multiple copies collated.
    * All functions of the program are now available via the main menu.
    * The program can automatically save your session.
    * Program allow to set negative margins on page.
    * Show current page number on the status bar.
    * Fixed Export to PDF function.
    * Updated translations.
    * Some GUI improvements.
    * Many small fixes.

Files

/usr/bin/boomaga
/usr/lib/cups/backend/boomaga
/usr/share/applications/boomaga.desktop
/usr/share/cups/model/boomaga.ppd
/usr/share/dbus-1/services/org.boomaga.service
/usr/share/doc/packages/boomaga
/usr/share/doc/packages/boomaga/README.md
/usr/share/icons/hicolor/128x128/apps/boomaga.png
/usr/share/icons/hicolor/16x16/apps/boomaga.png
/usr/share/icons/hicolor/256x256/apps/boomaga.png
/usr/share/icons/hicolor/32x32/apps/boomaga.png
/usr/share/icons/hicolor/48x48/apps/boomaga.png
/usr/share/icons/hicolor/512x512/apps/boomaga.png
/usr/share/icons/hicolor/64x64/apps/boomaga.png
/usr/share/licenses/boomaga
/usr/share/licenses/boomaga/COPYING
/usr/share/licenses/boomaga/GPL
/usr/share/licenses/boomaga/LGPL
/usr/share/man/man1/boomaga.1.gz
/usr/share/mime/packages/boomaga.xml

Generated by rpm2html 1.8.1

Fabrice Bellet, Tue Nov 19 01:14:14 2024