| Index | index by Group | index by Distribution | index by Vendor | index by creation date | index by Name | Mirrors | Help | Search |
| Name: cross-x86_64-binutils | Distribution: openSUSE Tumbleweed |
| Version: 2.43 | Vendor: openSUSE |
| Release: 2.1 | Build date: Wed Aug 28 15:18:28 2024 |
| Group: Development/Tools/Building | Build host: reproducible |
| Size: 19596778 | Source RPM: cross-x86_64-binutils-2.43-2.1.src.rpm |
| Packager: https://bugs.opensuse.org | |
| Url: https://www.gnu.org/software/binutils/ | |
| Summary: GNU Binutils | |
C compiler utilities: ar, as, gprof, ld, nm, objcopy, objdump, ranlib, size, strings, and strip. These utilities are needed whenever you want to compile a program or kernel.
GFDL-1.3-only AND GPL-3.0-or-later
* Wed Aug 28 2024 Michael Matz <matz@suse.com>
- Update to current 2.43.1 branch [PED-10474]:
* PR32109 - fuzzing problem
* PR32083 - LTO vs overridden common symbols
* PR32067 - crash with LTO-plugin and --oformat=binary
* PR31956 - LTO vs wrapper symbols
* riscv - add Zimop and Zcmop extensions
- Adjusted binutils-2.43-branch.diff.gz.
* Tue Aug 06 2024 Michael Matz <matz@suse.com>
- Update to version 2.43:
* new .base64 pseudo-op, allowing base64 encoded data as strings
* Intel APX: add support for CFCMOV, CCMP, CTEST, zero-upper, NF
(APX_F now fully supported)
* x86 Intel syntax now warns about more mnemonic suffixes
* macros and .irp/.irpc/.rept bodies can use \+ to get at number
of times the macro/body was executed
* aarch64: support 'armv9.5-a' for -march, add support for LUT
and LUT2
* s390: base register operand in D(X,B) and D(L,B) can now be
omitted (ala 'D(X,)'); warn when register type doesn't match
operand type (use option
'warn-regtype-mismatch=[strict|relaxed|no]' to adjust)
* riscv: support various extensions: Zacas, Zcmp, Zfbfmin,
Zvfbfmin, Zvfbfwma, Smcsrind/Sscsrind, XCvMem, XCvBi, XCvElw,
XSfCease, all at version 1.0;
remove support for assembly of privileged spec 1.9.1 (linking
support remains)
* arm: remove support for some old co-processors: Maverick and FPA
* mips: '--trap' now causes either trap or breakpoint instructions
to be emitted as per current ISA, instead of always using trap
insn and failing when current ISA was incompatible with that
* LoongArch: accept .option pseudo-op for fine-grained control
of assembly code options; add support for DT_RELR
* readelf: now displays RELR relocations in full detail;
add -j/--display-section to show just those section(s) content
according to their type
* objdump/readelf now dump also .eh_frame_hdr (when present) when
dumping .eh_frame
* gprofng: add event types for AMD Zen3/Zen4 and Intel Ice Lake
processors; add minimal support for riscv
* linker:
- put .got and .got.plt into relro segment
- add -z isa-level-report=[none|all|needed|used] to the x86 ELF
linker to report needed and used x86-64 ISA levels
- add --rosegment option which changes the -z separate-code
option so that only one read-only segment is created (instead
of two)
- add --section-ordering-file <FILE> option to add extra
mapping of input sections to output sections
- add -plugin-save-temps to store plugin intermediate files
permanently
- Removed binutils-2.42.tar.bz2, binutils-2.42-branch.diff.gz.
- Added binutils-2.43.tar.bz2, binutils-2.43-branch.diff.gz.
- Removed upstream patch riscv-no-relax.patch.
- Rebased ld-relro.diff and binutils-revert-rela.diff.
* Thu Jun 13 2024 Andreas Schwab <schwab@suse.de>
- binutils-pr22868.diff: Remove obsolete patch
- Undefine _FORTIFY_SOURCE when running checks
* Wed May 01 2024 Bernhard Wiedemann <bwiedemann@suse.com>
- Allow to disable profiling
* Thu Feb 22 2024 Dominique Leuenberger <dimstar@opensuse.org>
- Use %patch -P N instead of deprecated %patchN.
* Wed Feb 21 2024 Andreas Schwab <schwab@suse.de>
- riscv-no-relax.patch: RISC-V: Don't generate branch/jump relocation if
symbol is local when no-relax
* Mon Feb 05 2024 Michael Matz <matz@suse.com>
- Add binutils-disable-code-arch-error.diff to demote an
error about swapped .arch/.code directives to a warning.
It happens in the wild.
* Tue Jan 30 2024 Michael Matz <matz@suse.com>
- Update to version 2.42:
* Add support for many aarch64 extensions: SVE2.1, SME2.1, B16B16,
RASv2, LSE128, GCS, CHK, SPECRES2, LRCPC3, THE, ITE, D128, XS and
flags to enable them: '+fcma', '+jscvt', '+frintts', '+flagm2',
'+rcpc2' and '+wfxt'
* Add experimantal support for GAS to synthesize call-frame-info for
some hand-written asm (--scfi=experimental) on x86-64.
* Add support for more x86-64 extensions: APX: 32 GPRs, NDD, PUSH2/POP2,
PUSHP/POPP; USER_MSR, AVX10.1, PBNDKB, SM4, SM3, SHA512, AVX-VNNI-INT16.
* Add support for more RISC-V extensions: T-Head v2.3.0, CORE-V v1.0,
SiFive VCIX v1.0.
* BPF assembler: ';' separates statements now, and does not introduce
line comments anymore (use '#' or '//' for this).
* x86-64 ld: Add '-z mark-plt/-z nomark-plt' to mark PLT entries with
dynamic tags.
* risc-v ld: Add '--[no-]check-uleb128'.
* New linker script directive: REVERSE, to be combined with SORT_BY_NAME
or SORT_BY_INIT_PRIORITY, reverses the generated order.
* New linker options --warn-execstack-objects (warn only about execstack
when input object files request it), and --error-execstack plus
- -error-rxw-segments to convert the existing warnings into errors.
* objdump: Add -Z/--decompress to be used with -s/--full-contents to
decompress section contents before displaying.
* readelf: Add --extra-sym-info to be used with --symbols (currently
prints section name of references section index).
* objcopy: Add --set-section-flags for x86_64 to include
SHF_X86_64_LARGE.
* s390 disassembly: add target-specific disasm option 'insndesc',
as in "objdump -M insndesc" to display an instruction description
as comment along with the disassembly.
- Add binutils-2.42-branch.diff.gz.
- Rebased s390-biarch.diff.
- Adjusted binutils-revert-hlasm-insns.diff,
binutils-revert-plt32-in-branches.diff and binutils-revert-rela.diff
for upstream changes.
- Removed binutils-2.41-branch.diff.gz, binutils-2.41.tar.bz2,
binutils-2.41-branch.diff.gz.
- Removed binutils-use-less-memory.diff, binutils-old-makeinfo.diff
and riscv-relro.patch (all upstreamed).
- Removed add-ulp-section.diff, we use a different mechanism
for live patching since a long time.
* Thu Nov 09 2023 Michael Matz <matz@suse.com>
- Add binutils-use-less-memory.diff to be a little nicer to 32bit
userspace and huge links. [bsc#1216908]
* Mon Sep 25 2023 Andreas Schwab <schwab@suse.de>
- riscv-relro.patch: RISC-V: Protect .got with relro
* Thu Sep 14 2023 Michael Matz <matz@suse.com>
- Add libzstd-devel to Requires of binutils-devel. (bsc#1215341)
* Wed Aug 16 2023 Michael Matz <matz@suse.com>
- Update to version 2.41 [PED-5778]:
* The MIPS port now supports the Sony Interactive Entertainment Allegrex
processor, used with the PlayStation Portable, which implements the MIPS
II ISA along with a single-precision FPU and a few implementation-specific
integer instructions.
* Objdump's --private option can now be used on PE format files to display the
fields in the file header and section headers.
* New versioned release of libsframe: libsframe.so.1. This release introduces
versioned symbols with version node name LIBSFRAME_1.0. This release also
updates the ABI in an incompatible way: this includes removal of
sframe_get_funcdesc_with_addr API, change in the behavior of
sframe_fre_get_ra_offset and sframe_fre_get_fp_offset APIs.
* SFrame Version 2 is now the default (and only) format version supported by
gas, ld, readelf and objdump.
* Add command-line option, --strip-section-headers, to objcopy and strip to
remove ELF section header from ELF file.
* The RISC-V port now supports the following new standard extensions:
- Zicond (conditional zero instructions)
- Zfa (additional floating-point instructions)
- Zvbb, Zvbc, Zvkg, Zvkned, Zvknh[ab], Zvksed, Zvksh, Zvkn, Zvknc, Zvkng,
Zvks, Zvksc, Zvkg, Zvkt (vector crypto instructions)
* The RISC-V port now supports the following vendor-defined extensions:
- XVentanaCondOps
* Add support for Intel FRED, LKGS and AMX-COMPLEX instructions.
* A new .insn directive is recognized by x86 gas.
* Add SME2 support to the AArch64 port.
* The linker now accepts a command line option of --remap-inputs
<PATTERN>=<FILE> to relace any input file that matches <PATTERN> with
<FILE>. In addition the option --remap-inputs-file=<FILE> can be used to
specify a file containing any number of these remapping directives.
* The linker command line option --print-map-locals can be used to include
local symbols in a linker map. (ELF targets only).
* For most ELF based targets, if the --enable-linker-version option is used
then the version of the linker will be inserted as a string into the .comment
section.
* The linker script syntax has a new command for output sections: ASCIZ "string"
This will insert a zero-terminated string at the current location.
* Add command-line option, -z nosectionheader, to omit ELF section
header.
- Removed obsolete patches: binutils-2.40-branch.diff.gz,
riscv-dynamic-tls-reloc-pie.patch, riscv-pr22263-1.patch,
extensa-gcc-4_3-fix.diff .
- Add binutils-2.41-branch.diff.gz .
- Add binutils-old-makeinfo.diff for SLE-12 and older.
- Rebased aarch64-common-pagesize.patch and binutils-revert-rela.diff .
- Contains fixes for these non-CVEs (not security bugs per upstreams
SECURITY.md):
* bsc#1209642 aka CVE-2023-1579 aka PR29988
* bsc#1210297 aka CVE-2023-1972 aka PR30285
* bsc#1210733 aka CVE-2023-2222 aka PR29936
* bsc#1213458 aka CVE-2021-32256 aka PR105039 (gcc)
* bsc#1214565 aka CVE-2020-19726 aka PR26240
* bsc#1214567 aka CVE-2022-35206 aka PR29290
* bsc#1214579 aka CVE-2022-35205 aka PR29289
* bsc#1214580 aka CVE-2022-44840 aka PR29732
* bsc#1214604 aka CVE-2022-45703 aka PR29799
* bsc#1214611 aka CVE-2022-48065 aka PR29925
* bsc#1214619 aka CVE-2022-48064 aka PR29922
* bsc#1214620 aka CVE-2022-48063 aka PR29924
* bsc#1214623 aka CVE-2022-47696 aka PR29677
* bsc#1214624 aka CVE-2022-47695 aka PR29846
* bsc#1214625 aka CVE-2022-47673 aka PR29876
* Thu Jul 13 2023 Michael Matz <matz@suse.com>
- Add binutils-disable-dt-relr.sh for an compatibility problem
caused by binutils-revert-rela.diff in SLE codestreams.
Needed for update of glibc as that would otherwise pick up
the broken relative relocs support. [bsc#1213282, PED-1435]
- This only existed only for a very short while in SLE-15, as the main
variant in devel:gcc subsumed this in binutils-revert-rela.diff.
Hence:
- Remove binutils-disable-dt-relr.sh as subsumed.
* Tue May 30 2023 Andreas Schwab <schwab@suse.de>
- riscv-dynamic-tls-reloc-pie.patch: Backport for PR ld/22263 and PR
ld/25694
- riscv-pr22263-1.patch: Backport for PR ld/22263
* Wed Apr 12 2023 Martin Liška <mliska@suse.cz>
- Rebase branch patch (includes fix for PR30281).
* Tue Mar 21 2023 Martin Liška <mliska@suse.cz>
- Document fixed CVEs:
* bnc#1208037 aka CVE-2023-25588 aka PR29677
* bnc#1208038 aka CVE-2023-25587 aka PR29846
* bnc#1208040 aka CVE-2023-25585 aka PR29892
* bnc#1208409 aka CVE-2023-0687 aka PR29444
* Thu Mar 16 2023 Richard Biener <rguenther@suse.com>
- Enable bpf-none cross target and add bpf-none to the multitarget
set of supported targets.
* Wed Mar 08 2023 Michael Matz <matz@suse.com>
- Disable packed-relative-relocs for old codestreams. They generate
buggy relocations when binutils-revert-rela.diff is active.
[bsc#1206556]
* Thu Feb 23 2023 Martin Liška <mliska@suse.cz>
- Disable ZSTD debug section compress by default.
* Tue Feb 21 2023 Martin Liška <mliska@suse.cz>
- Enable zstd compression algorithm (instead of zlib)
for debug info sections by default.
* Mon Jan 30 2023 Martin Liška <mliska@suse.cz>
- Pack libgprofng only for supported platforms.
* Fri Jan 27 2023 Martin Liška <mliska@suse.cz>
- Remove upstreamed patch binutils-maxpagesize.diff.
* Fri Jan 27 2023 Martin Liška <mliska@suse.cz>
- Rebase binutils-2.40-branch.diff.gz as it includes fix for PR30043.
- Move libgprofng-related libraries to the proper locations (packages).
- Add --without=bootstrap for skipping of bootstrap (faster testing
of the package).
* Tue Jan 24 2023 Richard Biener <rguenther@suse.com>
- Remove broken arm32-avoid-copyreloc.patch to fix [gcc#108515]
* Mon Jan 16 2023 Martin Liška <mliska@suse.cz>
- Update to version 2.40:
* Objdump has a new command line option --show-all-symbols which will make it
display all symbols that match a given address when disassembling. (Normally
only the first symbol that matches an address is shown).
* Add --enable-colored-disassembly configure time option to enable colored
disassembly output by default, if the output device is a terminal. Note,
this configure option is disabled by default.
* DCO signed contributions are now accepted.
* objcopy --decompress-debug-sections now supports zstd compressed debug
sections. The new option --compress-debug-sections=zstd compresses debug
sections with zstd.
* addr2line and objdump --dwarf now support zstd compressed debug sections.
* The dlltool program now accepts --deterministic-libraries and
- -non-deterministic-libraries as command line options to control whether or
not it generates deterministic output libraries. If neither of these options
are used the default is whatever was set when the binutils were configured.
* readelf and objdump now have a newly added option --sframe which dumps the
SFrame section.
* Add support for Intel RAO-INT instructions.
* Add support for Intel AVX-NE-CONVERT instructions.
* Add support for Intel MSRLIST instructions.
* Add support for Intel WRMSRNS instructions.
* Add support for Intel CMPccXADD instructions.
* Add support for Intel AVX-VNNI-INT8 instructions.
* Add support for Intel AVX-IFMA instructions.
* Add support for Intel PREFETCHI instructions.
* Add support for Intel AMX-FP16 instructions.
* gas now supports --compress-debug-sections=zstd to compress
debug sections with zstd.
* Add --enable-default-compressed-debug-sections-algorithm={zlib,zstd}
that selects the default compression algorithm
for --enable-compressed-debug-sections.
* Add support for various T-Head extensions (XTheadBa, XTheadBb, XTheadBs,
XTheadCmo, XTheadCondMov, XTheadFMemIdx, XTheadFmv, XTheadInt, XTheadMemIdx,
XTheadMemPair, XTheadMac, and XTheadSync) from version 2.0 of the T-Head
ISA manual, which are implemented in the Allwinner D1.
* Add support for the RISC-V Zawrs extension, version 1.0-rc4.
* Add support for Cortex-X1C for Arm.
* New command line option --gsframe to generate SFrame unwind information
on x86_64 and aarch64 targets.
* The linker has a new command line option to suppress the generation of any
warning or error messages. This can be useful when there is a need to create
a known non-working binary. The option is -w or --no-warnings.
* ld now supports zstd compressed debug sections. The new option
- -compress-debug-sections=zstd compresses debug sections with zstd.
* Add --enable-default-compressed-debug-sections-algorithm={zlib,zstd}
that selects the default compression algorithm
for --enable-compressed-debug-sections.
* Remove support for -z bndplt (MPX prefix instructions).
- Rebased patches: add-ulp-section.diff, ld-relro.diff, binutils-revert-plt32-in-branches.diff,
cross-avr-size.patch.
- Removed patch: binutils-pr29482.diff.
- New patch: extensa-gcc-4_3-fix.diff.
- Includes fixes for these CVEs:
* bnc#1206080 aka CVE-2022-4285 aka PR29699
- Enable by default: --enable-colored-disassembly.
* Sat Dec 10 2022 Dirk Müller <dmueller@suse.com>
- fix build on x86_64_vX platforms
* Tue Oct 25 2022 Michael Matz <matz@suse.com>
- Add binutils-maxpagesize.diff for a problem on old code
streams, where we would generate too large binaries.
* Tue Oct 25 2022 Andreas Schwab <schwab@suse.de>
- s390-pic-dso.diff: use %pB instead of %B
* Mon Oct 17 2022 Michael Matz <matz@suse.com>
- SLE toolchain update of binutils. Update to 2.39 from 2.37,
which means obsoleting and hence removing these patches:
binutils-add-efi-aarch64-1.diff, binutils-add-efi-aarch64-2.diff,
binutils-add-efi-aarch64-3.diff, binutils-fix-keepdebug.diff,
binutils-add-z16-name.diff.
Implements [jsc#SLE-25046, jsc#PED-2029, jsc#PED-2035, jsc#PED-2033,
jsc#PED-2030, jsc#PED-2038, jsc#PED-2032, jsc#PED-2034, jsc#PED-2031,
jsc#SLE-25047]
- This fixes these CVEs relative to 2.37:
[bsc#1188374, bsc#1185597] aka (GCC) PR99935 aka CVE-2021-3648
[bsc#1193929] aka PR28694 aka CVE-2021-45078
[bsc#1194783] aka (GCC) PR98886 aka CVE-2021-46195
[bsc#1197592] aka (GCC) PR105039 aka CVE-2022-27943
[bsc#1202966] aka PR29289 aka CVE-2022-38126
[bsc#1202967] aka PR29290 aka CVE-2022-38127
[bsc#1202969] aka CVE-2021-3826
* Fri Oct 14 2022 Dirk Müller <dmueller@suse.com>
- add arm32-avoid-copyreloc.patch for PR16177 (bsc#1200962)
* Fri Aug 26 2022 Michael Matz <matz@suse.com>
- Add binutils-pr29482.diff for PR29482, aka CVE-2022-38533
[bsc#1202816]
* Wed Aug 10 2022 Martin Liška <mliska@suse.cz>
- Rebase binutils-2.39-branch.diff.gz that contains fix for PR29451.
* Mon Aug 08 2022 Martin Liška <mliska@suse.cz>
- Add binutils-2.39-branch.diff.gz.
- Explicitly enable --enable-warn-execstack=yes and --enable-warn-rwx-segments=yes.
- Add gprofng subpackage.
* Sat Aug 06 2022 Martin Liška <mliska@suse.cz>
- Update to binutils 2.39:
* The ELF linker will now generate a warning message if the stack is made
executable. Similarly it will warn if the output binary contains a
segment with all three of the read, write and execute permission
bits set. These warnings are intended to help developers identify
programs which might be vulnerable to attack via these executable
memory regions.
The warnings are enabled by default but can be disabled via a command
line option. It is also possible to build a linker with the warnings
disabled, should that be necessary.
* The ELF linker now supports a --package-metadata option that allows
embedding a JSON payload in accordance to the Package Metadata
specification.
* In linker scripts it is now possible to use TYPE=<type> in an output
section description to set the section type value.
* The objdump program now supports coloured/colored syntax
highlighting of its disassembler output for some architectures.
(Currently: AVR, RiscV, s390, x86, x86_64).
* The nm program now supports a --no-weak/-W option to make it ignore
weak symbols.
* The readelf and objdump programs now support a -wE option to prevent
them from attempting to access debuginfod servers when following
links.
* The objcopy program's --weaken, --weaken-symbol, and
- -weaken-symbols options now works with unique symbols as well.
- Rebase binutils-compat-old-behaviour.diff, binutils-revert-hlasm-insns.diff,
binutils-revert-plt32-in-branches.diff and remove binutils-2.38-branch.diff.gz.
- For now use --disable-gprofng.
- Includes fixes for these CVEs:
bnc#1142579 aka CVE-2019-1010204 aka PR23765
* Mon Jun 13 2022 Michael Matz <matz@suse.com>
(Fake entry from SLE for tracking purposes:)
- For building shim 15.6~rc1 (and later versions) aarch64 image, objcopy
needs to support efi-app-aarch64 target. (bsc#1198458)
Adds binutils-add-efi-aarch64-1.diff,
binutils-add-efi-aarch64-2.diff, binutils-add-efi-aarch64-3.diff .
* Wed May 25 2022 Martin Liška <mliska@suse.cz>
- Use https for variosu links.
* Wed May 25 2022 Martin Liška <mliska@suse.cz>
- Update binutils-2.38-branch.diff.gz (to 93054037f1e304e)
in order to include PR29087.
* Mon May 09 2022 Andreas Schwab <schwab@suse.de>
- Enable multitarget build on riscv64
- On SLE15 and later, use make -Oline to synchronize configure output by
lines
* Fri May 06 2022 Michael Matz <matz@suse.com>
(Fake entry from SLE for tracking purposes:)
- Add binutils-fix-keepdebug.diff for fix bsc#1191908, a problem
in crash not accepting some of our .ko.debug files.
* Wed May 04 2022 Martin Liška <mliska@suse.cz>
- Renumber Sources.
* Wed May 04 2022 Martin Liška <mliska@suse.cz>
- Fix ExcludeArch for ppc.
* Wed May 04 2022 Martin Liška <mliska@suse.cz>
- Make multibuild utilize only the main binutils.spec file.
- Remove not needed README.First-for.SUSE.packagers, pre_checkin.sh.
* Mon May 02 2022 Martin Liška <mliska@suse.cz>
- Start using _multibuild for cross binutils.
* Mon Apr 25 2022 Michael Matz <matz@suse.com>
- Add binutils-revert-rela.diff to revert back to old behaviour
of not ignoring the in-section content of to be relocated
fields on x86-64, even though that's a RELA architecture.
Compatibility with buggy object files generated by old tools.
[bsc#1198422]
(forward port from SLE)
* Mon Apr 11 2022 Michael Matz <matz@suse.com>
- Update binutils-2.38-branch.diff.gz (to c210342d7f5) to include
recognition of 'z16' name for 'arch14' on s390. [bsc#1198237]
* Mon Apr 11 2022 Michael Matz <matz@suse.com>
(Fake entry from SLE for tracking purposes:)
- Add binutils-add-z16-name.diff so that the now official name
z16 for arch14 is recognized. [bsc#1198237]
* Mon Mar 21 2022 Marcus Meissner <meissner@suse.com>
- Add usage of a SUSE_ZNOW environment variable which allows switching
on "-z now" by default using "export SUSE_ZNOW=1", similar to
the SUSE_ASNEEDED variable. Adds binutils-znow.patch.
* Thu Mar 10 2022 Wolfgang Bauer <wbauer@tmo.at>
- Update binutils-skip-rpaths.patch: add back fix for boo#1191473,
which got lost in the update to 2.38.
* Fri Mar 04 2022 Martin Liška <mliska@suse.cz>
- Update binutils-2.38-branch.diff.gz in order to include PR28879.
* Tue Mar 01 2022 Michael Matz <matz@suse.com>
- From Stefan Brüns <stefan.bruens@rwth-aachen.de>:
* Install symlinks for all target specific tools on
arm-eabi-none [bsc#1185712]
* Thu Feb 24 2022 Martin Liška <mliska@suse.cz>
- Do not re-generate ld/ldlex.c, ld/ldgram.c, ld/ldgram.h and verify
that corresponding flex/bison files are not modified by a patch.
* Thu Feb 24 2022 Martin Liška <mliska@suse.cz>
- Use verbose mode for make for cross compilers.
* Wed Feb 23 2022 Michael Matz <matz@suse.com>
- Make it build on SLE-11 again.
* Tue Feb 22 2022 Martin Liška <mliska@suse.cz>
- Use verbose mode for make.
* Sat Feb 12 2022 Martin Liška <mliska@suse.cz>
- Update to binutils 2.38:
* elfedit: Add --output-abiversion option to update ABIVERSION.
* Add support for the LoongArch instruction set.
* Tools which display symbols or strings (readelf, strings, nm, objdump)
have a new command line option which controls how unicode characters are
handled. By default they are treated as normal for the tool. Using
- -unicode=locale will display them according to the current locale.
Using --unicode=hex will display them as hex byte values, whilst
- -unicode=escape will display them as escape sequences. In addition
using --unicode=highlight will display them as unicode escape sequences
highlighted in red (if supported by the output device).
* readelf -r dumps RELR relative relocations now.
* Support for efi-app-aarch64, efi-rtdrv-aarch64 and efi-bsdrv-aarch64 has been
added to objcopy in order to enable UEFI development using binutils.
* ar: Add --thin for creating thin archives. -T is a deprecated alias without
diagnostics. In many ar implementations -T has a different meaning, as
specified by X/Open System Interface.
* Add support for AArch64 system registers that were missing in previous
releases.
* Add support for the LoongArch instruction set.
* Add a command-line option, -muse-unaligned-vector-move, for x86 target
to encode aligned vector move as unaligned vector move.
* Add support for Cortex-R52+ for Arm.
* Add support for Cortex-A510, Cortex-A710, Cortex-X2 for AArch64.
* Add support for Cortex-A710 for Arm.
* Add support for Scalable Matrix Extension (SME) for AArch64.
* The --multibyte-handling=[allow|warn|warn-sym-only] option tells the
assembler what to when it encoutners multibyte characters in the input. The
default is to allow them. Setting the option to "warn" will generate a
warning message whenever any multibyte character is encountered. Using the
option to "warn-sym-only" will make the assembler generate a warning whenever a
symbol is defined containing multibyte characters. (References to undefined
symbols will not generate warnings).
* Outputs of .ds.x directive and .tfloat directive with hex input from
x86 assembler have been reduced from 12 bytes to 10 bytes to match the
output of .tfloat directive.
* Add support for 'armv8.8-a', 'armv9-a', 'armv9.1-a', 'armv9.2-a' and
'armv9.3-a' for -march in AArch64 GAS.
* Add support for 'armv8.7-a', 'armv8.8-a', 'armv9-a', 'armv9.1-a',
'armv9.2-a' and 'armv9.3-a' for -march in Arm GAS.
* Add support for Intel AVX512_FP16 instructions.
* Add -z pack-relative-relocs/-z no pack-relative-relocs to x86 ELF
linker to pack relative relocations in the DT_RELR section.
* Add support for the LoongArch architecture.
* Add -z indirect-extern-access/-z noindirect-extern-access to x86 ELF
linker to control canonical function pointers and copy relocation.
* Add --max-cache-size=SIZE to set the the maximum cache size to SIZE
bytes.
- Add binutils-2.38-branch.diff.gz.
- Removed deletion of man pages as they should be properly packages
in tarball.
- Rebased patches: aarch64-common-pagesize.patch, add-ulp-section.diff,
binutils-bfd_h.patch, binutils-revert-nm-symversion.diff,
binutils-revert-plt32-in-branches.diff, binutils-skip-rpaths.patch
and binutils-compat-old-behaviour.diff.
* Fri Feb 04 2022 Matwey Kornilov <matwey.kornilov@gmail.com>
- Enable PRU architecture for AM335x CPU (Beagle Bone Black board)
* Thu Jan 27 2022 Dirk Müller <dmueller@suse.com>
- use fdupes on datadir
- remove RPM_BUILD_ROOT usage and other cleanups
* Fri Nov 12 2021 Martin Liška <mliska@suse.cz>
- Rebase binutils-2.37-branch.diff: fixes PR28494.
* Fri Nov 05 2021 Michael Matz <matz@suse.com>
- Add binutils-revert-hlasm-insns.diff for compatibility on old
code stream that expect 'brcl 0,label' to not be disassembled
as 'jgnop label' on s390x. [bsc#1192267]
* Wed Nov 03 2021 Martin Liška <mliska@suse.cz>
- Rebase binutils-2.37-branch.diff: fixes PR28523 aka boo#1188941.
* Tue Nov 02 2021 Michael Matz <matz@suse.com>
- Fix empty man-pages from broken release tarball [PR28144].
* Mon Nov 01 2021 Martin Liška <mliska@suse.cz>
- Update binutils-skip-rpaths.patch with contained a memory corruption
(boo#1191473).
* Fri Oct 08 2021 Michael Matz <matz@suse.com>
- Configure with --disable-x86-used-note on old code streams.
- Disable libalternatives temporarily for build cycle reasons.
- make TARGET-bfd=headers again, we patch bfd-in.h
- This state submitted to SLE12 and SLE15 code streams for annual
toolchain update. [jsc#PM-2767, jsc#SLE-21561, jsc#SLE-19618]
- Bump binutils-2.37-branch.diff to 66d5c7003, to include fixes for
PR28422, PR28192, PR28391. Also adds some s390x arch14
instructions [jsc#SLE-18637].
* Fri Sep 10 2021 Stefan Schubert schubi@suse.de
- Using libalternatives instead of update-alternatives.
* Wed Sep 08 2021 Michael Matz <matz@suse.com>
- Adjust for testsuite fails on older products that configure
binutils in different ways, adds binutils-compat-old-behaviour.diff
and adjusts binutils-revert-nm-symversion.diff and
binutils-revert-plt32-in-branches.diff.
* Tue Aug 03 2021 Martin Liška <mliska@suse.cz>
- Bump binutils-2.37-branch.diff: fixes PR28138.
* Thu Jul 22 2021 Martin Liška <mliska@suse.cz>
- Use LTO & PGO build.
* Thu Jul 22 2021 Martin Liška <mliska@suse.cz>
- Update to binutils 2.37:
* The GNU Binutils sources now requires a C99 compiler and library to
build.
* Support for the arm-symbianelf format has been removed.
* Support for Realm Management Extension (RME) for AArch64 has been
added.
* A new linker option '-z report-relative-reloc' for x86 ELF targets
has been added to report dynamic relative relocations.
* A new linker option '-z start-stop-gc' has been added to disable
special treatment of __start_*/__stop_* references when
- -gc-sections.
* A new linker options '-Bno-symbolic' has been added which will
cancel the '-Bsymbolic' and '-Bsymbolic-functions' options.
* The readelf tool has a new command line option which can be used to
specify how the numeric values of symbols are reported.
- -sym-base=0|8|10|16 tells readelf to display the values in base 8,
base 10 or base 16. A sym base of 0 represents the default action
of displaying values under 10000 in base 10 and values above that in
base 16.
* A new format has been added to the nm program. Specifying
'--format=just-symbols' (or just using -j) will tell the program to
only display symbol names and nothing else.
* A new command line option '--keep-section-symbols' has been added to
objcopy and strip. This stops the removal of unused section symbols
when the file is copied. Removing these symbols saves space, but
sometimes they are needed by other tools.
* The '--weaken', '--weaken-symbol' and '--weaken-symbols' options
supported by objcopy now make undefined symbols weak on targets that
support weak symbols.
* Readelf and objdump can now display and use the contents of .debug_sup
sections.
* Readelf and objdump will now follow links to separate debug info
files by default. This behaviour can be stopped via the use of the
new '-wN' or '--debug-dump=no-follow-links' options for readelf and
the '-WN' or '--dwarf=no-follow-links' options for objdump. Also
the old behaviour can be restored by the use of the
'--enable-follow-debug-links=no' configure time option.
The semantics of the =follow-links option have also been slightly
changed. When enabled, the option allows for the loading of symbol
tables and string tables from the separate files which can be used
to enhance the information displayed when dumping other sections,
but it does not automatically imply that information from the
separate files should be displayed.
If other debug section display options are also enabled (eg
'--debug-dump=info') then the contents of matching sections in both
the main file and the separate debuginfo file *will* be displayed.
This is because in most cases the debug section will only be present
in one of the files.
If however non-debug section display options are enabled (eg
'--sections') then the contents of matching parts of the separate
debuginfo file will *not* be displayed. This is because in most
cases the user probably only wanted to load the symbol information
from the separate debuginfo file. In order to change this behaviour
a new command line option --process-links can be used. This will
allow di0pslay options to applied to both the main file and any
separate debuginfo files.
* Nm has a new command line option: '--quiet'. This suppresses "no
symbols" diagnostic.
- Includes fixes for these CVEs:
bnc#1181452 aka CVE-2021-20197 aka PR26945
bnc#1183511 aka CVE-2021-20284 aka PR26931
bnc#1184519 aka CVE-2021-20294 aka PR26929
bnc#1184620 aka CVE-2021-3487 aka PR26946
bnc#1184794 aka CVE-2020-35448 aka PR26574
- Also fixes:
bsc#1183909 - slow performance of stripping some binaries
- Rebased patches: binutils-build-as-needed.diff, binutils-fix-abierrormsg.diff,
binutils-fix-invalid-op-errata.diff, binutils-fix-relax.diff,
binutils-revert-nm-symversion.diff, binutils-revert-plt32-in-branches.diff
- Removed patches (are in upstream): ppc-ensure-undef-dynamic-weak-undefined.patch and
ppc-use-local-plt.patch.
- Add binutils-2.37-branch.diff.gz.
* Fri May 07 2021 Andreas Schwab <schwab@suse.de>
- ppc-ensure-undef-dynamic-weak-undefined.patch: PPC: ensure_undef_dynamic
on weak undef only in plt
- ppc-use-local-plt.patch: PowerPC use_local_plt (prerequisite for above
patch)
* Fri Mar 26 2021 Martin Liška <mliska@suse.cz>
- Update 2.36 branch diff which fixes PR27587.
* Wed Mar 03 2021 Martin Liška <mliska@suse.cz>
- Do not run make TARGET-bfd=headers separately.
* Mon Mar 01 2021 Martin Liška <mliska@suse.cz>
- Bump 2.36 branch diff (includes fix for PR27441 aka bsc#1182252).
* Thu Feb 04 2021 Martin Liška <mliska@suse.cz>
- Bump 2.36 branch diff.
* Wed Feb 03 2021 Martin Liška <mliska@suse.cz>
- Update 2.36 branch diff which should fix PR27311 completely.
It fixes also PR27284.
- Remove temporary fix 0001-PR27311-ld.bfd-symbol-from-plugin-undefined-referenc.patch.
* Tue Feb 02 2021 Martin Liška <mliska@suse.cz>
- Add temporary upstream fix for PR27311
0001-PR27311-ld.bfd-symbol-from-plugin-undefined-referenc.patch.
* Sun Jan 24 2021 Martin Liška <mliska@suse.cz>
- Update to binutils 2.36:
New features in the Assembler:
General:
* When setting the link order attribute of ELF sections, it is now
possible to use a numeric section index instead of symbol name.
* Added a .nop directive to generate a single no-op instruction in
a target neutral manner. This instruction does have an effect on
DWARF line number generation, if that is active.
* Removed --reduce-memory-overheads and --hash-size as gas now
uses hash tables that can be expand and shrink automatically.
X86/x86_64:
* Add support for AVX VNNI, HRESET, UINTR, TDX, AMX and Key
Locker instructions.
* Support non-absolute segment values for lcall and ljmp.
* Add {disp16} pseudo prefix to x86 assembler.
* Configure with --enable-x86-used-note by default for Linux/x86.
ARM/AArch64:
* Add support for Cortex-A78, Cortex-A78AE and Cortex-X1,
Cortex-R82, Neoverse V1, and Neoverse N2 cores.
* Add support for ETMv4 (Embedded Trace Macrocell), ETE (Embedded
Trace Extension), TRBE (Trace Buffer Extension), CSRE (Call
Stack Recorder Extension) and BRBE (Branch Record Buffer
Extension) system registers.
* Add support for Armv8-R and Armv8.7-A ISA extensions.
* Add support for DSB memory nXS barrier, WFET and WFIT
instruction for Armv8.7.
* Add support for +csre feature for -march. Add CSR PDEC
instruction for CSRE feature in AArch64.
* Add support for +flagm feature for -march in Armv8.4 AArch64.
* Add support for +ls64 feature for -march in Armv8.7
AArch64. Add atomic 64-byte load/store instructions for this
feature.
* Add support for +pauth (Pointer Authentication) feature for
- march in AArch64.
New features in the Linker:
* Add --error-handling-script=<NAME> command line option to allow
a helper script to be invoked when an undefined symbol or a
missing library is encountered. This option can be suppressed
via the configure time switch: --enable-error-handling-script=no.
* Add -z x86-64-{baseline|v[234]} to the x86 ELF linker to mark
x86-64-{baseline|v[234]} ISA level as needed.
* Add -z unique-symbol to avoid duplicated local symbol names.
* The creation of PE format DLLs now defaults to using a more
secure set of DLL characteristics.
* The linker now deduplicates the types in .ctf sections. The new
command-line option --ctf-share-types describes how to do this:
its default value, share-unconflicted, produces the most compact
output.
* The linker now omits the "variable section" from .ctf sections
by default, saving space. This is almost certainly what you
want unless you are working on a project that has its own
analogue of symbol tables that are not reflected in the ELF
symtabs.
New features in other binary tools:
* The ar tool's previously unused l modifier is now used for
specifying dependencies of a static library. The arguments of
this option (or --record-libdeps long form option) will be
stored verbatim in the __.LIBDEP member of the archive, which
the linker may read at link time.
* Readelf can now display the contents of LTO symbol table
sections when asked to do so via the --lto-syms command line
option.
* Readelf now accepts the -C command line option to enable the
demangling of symbol names. In addition the --demangle=<style>,
- -no-demangle, --recurse-limit and --no-recurse-limit options
are also now availale.
- Includes fixes for these CVEs:
bnc#1179898 aka CVE-2020-16590 aka PR25821
bnc#1179899 aka CVE-2020-16591 aka PR25822
bnc#1179900 aka CVE-2020-16592 aka PR25823
bnc#1179901 aka CVE-2020-16593 aka PR25827
bnc#1179902 aka CVE-2020-16598 aka PR25840
bnc#1179903 aka CVE-2020-16599 aka PR25842
bnc#1180451 aka CVE-2020-35493 aka PR25307
bnc#1180454 aka CVE-2020-35496 aka PR25308
bnc#1180461 aka CVE-2020-35507 aka PR25308
- Rebase the following patches:
* binutils-fix-relax.diff
* binutils-revert-nm-symversion.diff
* binutils-revert-plt32-in-branches.diff
- Add missing dependency on bc (ld.gold testsuite uses it).
- Use --enable-obsolete for cross builds as ia64 is deprecated now.
- Add binutils-2.36-branch.diff.gz.
/usr/bin/x86_64-suse-linux-addr2line /usr/bin/x86_64-suse-linux-ar /usr/bin/x86_64-suse-linux-as /usr/bin/x86_64-suse-linux-elfedit /usr/bin/x86_64-suse-linux-gprof /usr/bin/x86_64-suse-linux-ld /usr/bin/x86_64-suse-linux-ld.bfd /usr/bin/x86_64-suse-linux-nm /usr/bin/x86_64-suse-linux-objcopy /usr/bin/x86_64-suse-linux-objdump /usr/bin/x86_64-suse-linux-ranlib /usr/bin/x86_64-suse-linux-readelf /usr/bin/x86_64-suse-linux-size /usr/bin/x86_64-suse-linux-strings /usr/bin/x86_64-suse-linux-strip /usr/x86_64-suse-linux /usr/x86_64-suse-linux/bin /usr/x86_64-suse-linux/bin/ar /usr/x86_64-suse-linux/bin/as /usr/x86_64-suse-linux/bin/ld /usr/x86_64-suse-linux/bin/ld.bfd /usr/x86_64-suse-linux/bin/nm /usr/x86_64-suse-linux/bin/objcopy /usr/x86_64-suse-linux/bin/objdump /usr/x86_64-suse-linux/bin/ranlib /usr/x86_64-suse-linux/bin/readelf /usr/x86_64-suse-linux/bin/strip /usr/x86_64-suse-linux/lib /usr/x86_64-suse-linux/lib/ldscripts /usr/x86_64-suse-linux/lib/ldscripts/elf32_x86_64.x /usr/x86_64-suse-linux/lib/ldscripts/elf32_x86_64.xbn /usr/x86_64-suse-linux/lib/ldscripts/elf32_x86_64.xc /usr/x86_64-suse-linux/lib/ldscripts/elf32_x86_64.xce /usr/x86_64-suse-linux/lib/ldscripts/elf32_x86_64.xcer /usr/x86_64-suse-linux/lib/ldscripts/elf32_x86_64.xd /usr/x86_64-suse-linux/lib/ldscripts/elf32_x86_64.xdc /usr/x86_64-suse-linux/lib/ldscripts/elf32_x86_64.xdce /usr/x86_64-suse-linux/lib/ldscripts/elf32_x86_64.xdcer /usr/x86_64-suse-linux/lib/ldscripts/elf32_x86_64.xde /usr/x86_64-suse-linux/lib/ldscripts/elf32_x86_64.xder /usr/x86_64-suse-linux/lib/ldscripts/elf32_x86_64.xdw /usr/x86_64-suse-linux/lib/ldscripts/elf32_x86_64.xdwe /usr/x86_64-suse-linux/lib/ldscripts/elf32_x86_64.xdwer /usr/x86_64-suse-linux/lib/ldscripts/elf32_x86_64.xe /usr/x86_64-suse-linux/lib/ldscripts/elf32_x86_64.xer /usr/x86_64-suse-linux/lib/ldscripts/elf32_x86_64.xn /usr/x86_64-suse-linux/lib/ldscripts/elf32_x86_64.xr /usr/x86_64-suse-linux/lib/ldscripts/elf32_x86_64.xs /usr/x86_64-suse-linux/lib/ldscripts/elf32_x86_64.xsc /usr/x86_64-suse-linux/lib/ldscripts/elf32_x86_64.xsce /usr/x86_64-suse-linux/lib/ldscripts/elf32_x86_64.xscer /usr/x86_64-suse-linux/lib/ldscripts/elf32_x86_64.xse /usr/x86_64-suse-linux/lib/ldscripts/elf32_x86_64.xser /usr/x86_64-suse-linux/lib/ldscripts/elf32_x86_64.xsw /usr/x86_64-suse-linux/lib/ldscripts/elf32_x86_64.xswe /usr/x86_64-suse-linux/lib/ldscripts/elf32_x86_64.xswer /usr/x86_64-suse-linux/lib/ldscripts/elf32_x86_64.xu /usr/x86_64-suse-linux/lib/ldscripts/elf32_x86_64.xw /usr/x86_64-suse-linux/lib/ldscripts/elf32_x86_64.xwe /usr/x86_64-suse-linux/lib/ldscripts/elf32_x86_64.xwer /usr/x86_64-suse-linux/lib/ldscripts/elf_i386.x /usr/x86_64-suse-linux/lib/ldscripts/elf_i386.xbn /usr/x86_64-suse-linux/lib/ldscripts/elf_i386.xc /usr/x86_64-suse-linux/lib/ldscripts/elf_i386.xce /usr/x86_64-suse-linux/lib/ldscripts/elf_i386.xcer /usr/x86_64-suse-linux/lib/ldscripts/elf_i386.xd /usr/x86_64-suse-linux/lib/ldscripts/elf_i386.xdc /usr/x86_64-suse-linux/lib/ldscripts/elf_i386.xdce /usr/x86_64-suse-linux/lib/ldscripts/elf_i386.xdcer /usr/x86_64-suse-linux/lib/ldscripts/elf_i386.xde /usr/x86_64-suse-linux/lib/ldscripts/elf_i386.xder /usr/x86_64-suse-linux/lib/ldscripts/elf_i386.xdw /usr/x86_64-suse-linux/lib/ldscripts/elf_i386.xdwe /usr/x86_64-suse-linux/lib/ldscripts/elf_i386.xdwer /usr/x86_64-suse-linux/lib/ldscripts/elf_i386.xe /usr/x86_64-suse-linux/lib/ldscripts/elf_i386.xer /usr/x86_64-suse-linux/lib/ldscripts/elf_i386.xn /usr/x86_64-suse-linux/lib/ldscripts/elf_i386.xr /usr/x86_64-suse-linux/lib/ldscripts/elf_i386.xs /usr/x86_64-suse-linux/lib/ldscripts/elf_i386.xsc /usr/x86_64-suse-linux/lib/ldscripts/elf_i386.xsce /usr/x86_64-suse-linux/lib/ldscripts/elf_i386.xscer /usr/x86_64-suse-linux/lib/ldscripts/elf_i386.xse /usr/x86_64-suse-linux/lib/ldscripts/elf_i386.xser /usr/x86_64-suse-linux/lib/ldscripts/elf_i386.xsw /usr/x86_64-suse-linux/lib/ldscripts/elf_i386.xswe /usr/x86_64-suse-linux/lib/ldscripts/elf_i386.xswer /usr/x86_64-suse-linux/lib/ldscripts/elf_i386.xu /usr/x86_64-suse-linux/lib/ldscripts/elf_i386.xw /usr/x86_64-suse-linux/lib/ldscripts/elf_i386.xwe /usr/x86_64-suse-linux/lib/ldscripts/elf_i386.xwer /usr/x86_64-suse-linux/lib/ldscripts/elf_iamcu.x /usr/x86_64-suse-linux/lib/ldscripts/elf_iamcu.xbn /usr/x86_64-suse-linux/lib/ldscripts/elf_iamcu.xc /usr/x86_64-suse-linux/lib/ldscripts/elf_iamcu.xce /usr/x86_64-suse-linux/lib/ldscripts/elf_iamcu.xcer /usr/x86_64-suse-linux/lib/ldscripts/elf_iamcu.xd /usr/x86_64-suse-linux/lib/ldscripts/elf_iamcu.xdc /usr/x86_64-suse-linux/lib/ldscripts/elf_iamcu.xdce /usr/x86_64-suse-linux/lib/ldscripts/elf_iamcu.xdcer /usr/x86_64-suse-linux/lib/ldscripts/elf_iamcu.xde /usr/x86_64-suse-linux/lib/ldscripts/elf_iamcu.xder /usr/x86_64-suse-linux/lib/ldscripts/elf_iamcu.xdw /usr/x86_64-suse-linux/lib/ldscripts/elf_iamcu.xdwe /usr/x86_64-suse-linux/lib/ldscripts/elf_iamcu.xdwer /usr/x86_64-suse-linux/lib/ldscripts/elf_iamcu.xe /usr/x86_64-suse-linux/lib/ldscripts/elf_iamcu.xer /usr/x86_64-suse-linux/lib/ldscripts/elf_iamcu.xn /usr/x86_64-suse-linux/lib/ldscripts/elf_iamcu.xr /usr/x86_64-suse-linux/lib/ldscripts/elf_iamcu.xs /usr/x86_64-suse-linux/lib/ldscripts/elf_iamcu.xsc /usr/x86_64-suse-linux/lib/ldscripts/elf_iamcu.xsce /usr/x86_64-suse-linux/lib/ldscripts/elf_iamcu.xscer /usr/x86_64-suse-linux/lib/ldscripts/elf_iamcu.xse /usr/x86_64-suse-linux/lib/ldscripts/elf_iamcu.xser /usr/x86_64-suse-linux/lib/ldscripts/elf_iamcu.xsw /usr/x86_64-suse-linux/lib/ldscripts/elf_iamcu.xswe /usr/x86_64-suse-linux/lib/ldscripts/elf_iamcu.xswer /usr/x86_64-suse-linux/lib/ldscripts/elf_iamcu.xu /usr/x86_64-suse-linux/lib/ldscripts/elf_iamcu.xw /usr/x86_64-suse-linux/lib/ldscripts/elf_iamcu.xwe /usr/x86_64-suse-linux/lib/ldscripts/elf_iamcu.xwer /usr/x86_64-suse-linux/lib/ldscripts/elf_x86_64.x /usr/x86_64-suse-linux/lib/ldscripts/elf_x86_64.xbn /usr/x86_64-suse-linux/lib/ldscripts/elf_x86_64.xc /usr/x86_64-suse-linux/lib/ldscripts/elf_x86_64.xce /usr/x86_64-suse-linux/lib/ldscripts/elf_x86_64.xcer /usr/x86_64-suse-linux/lib/ldscripts/elf_x86_64.xd /usr/x86_64-suse-linux/lib/ldscripts/elf_x86_64.xdc /usr/x86_64-suse-linux/lib/ldscripts/elf_x86_64.xdce /usr/x86_64-suse-linux/lib/ldscripts/elf_x86_64.xdcer /usr/x86_64-suse-linux/lib/ldscripts/elf_x86_64.xde /usr/x86_64-suse-linux/lib/ldscripts/elf_x86_64.xder /usr/x86_64-suse-linux/lib/ldscripts/elf_x86_64.xdw /usr/x86_64-suse-linux/lib/ldscripts/elf_x86_64.xdwe /usr/x86_64-suse-linux/lib/ldscripts/elf_x86_64.xdwer /usr/x86_64-suse-linux/lib/ldscripts/elf_x86_64.xe /usr/x86_64-suse-linux/lib/ldscripts/elf_x86_64.xer /usr/x86_64-suse-linux/lib/ldscripts/elf_x86_64.xn /usr/x86_64-suse-linux/lib/ldscripts/elf_x86_64.xr /usr/x86_64-suse-linux/lib/ldscripts/elf_x86_64.xs /usr/x86_64-suse-linux/lib/ldscripts/elf_x86_64.xsc /usr/x86_64-suse-linux/lib/ldscripts/elf_x86_64.xsce /usr/x86_64-suse-linux/lib/ldscripts/elf_x86_64.xscer /usr/x86_64-suse-linux/lib/ldscripts/elf_x86_64.xse /usr/x86_64-suse-linux/lib/ldscripts/elf_x86_64.xser /usr/x86_64-suse-linux/lib/ldscripts/elf_x86_64.xsw /usr/x86_64-suse-linux/lib/ldscripts/elf_x86_64.xswe /usr/x86_64-suse-linux/lib/ldscripts/elf_x86_64.xswer /usr/x86_64-suse-linux/lib/ldscripts/elf_x86_64.xu /usr/x86_64-suse-linux/lib/ldscripts/elf_x86_64.xw /usr/x86_64-suse-linux/lib/ldscripts/elf_x86_64.xwe /usr/x86_64-suse-linux/lib/ldscripts/elf_x86_64.xwer /usr/x86_64-suse-linux/lib/ldscripts/stamp
Generated by rpm2html 1.8.1
Fabrice Bellet, Tue Nov 19 01:14:14 2024