| Index | index by Group | index by Distribution | index by Vendor | index by creation date | index by Name | Mirrors | Help | Search |
| Name: libindiAlignmentDriver2 | Distribution: openSUSE:Factory:zSystems |
| Version: 2.0.9 | Vendor: openSUSE |
| Release: 2.1 | Build date: Fri Aug 30 08:38:27 2024 |
| Group: System/Libraries | Build host: reproducible |
| Size: 440415 | Source RPM: indi-2.0.9-2.1.src.rpm |
| Packager: https://bugs.opensuse.org | |
| Url: https://www.indilib.org/ | |
| Summary: Instrument Neutral Distributed Interface | |
INDI is an Instrument Neutral Distributed Interface control protocol for astronomical devices, which provides a framework that decouples low level hardware drivers from high level front end clients. Clients that use the device drivers are completely unaware of the device capabilities and communicate with the device drivers and build a completely dynamic GUI based on the services provided by the device.
GPL-2.0-or-later AND LGPL-2.1-or-later AND GPL-3.0-or-later
* Fri Aug 30 2024 Max Lin <mlin@suse.com>
- To use cfitsio-devel on 16.0 as well not just greater than 16.0
* Fri Aug 02 2024 Paolo Stivanin <info@paolostivanin.com>
- Update to 2.0.9:
* Minor buffer boundary fixes
* Weather watcher dynamic labels
* PegasusAstro FalconV2 Driver
* Add Terrans PowerBoxPro V2 Driver
* Waveshare Modbus Relay Drive
* Universal Roll off roof driver
* ZWO AM5 Save home position in the mount
* Mon Jun 10 2024 Paolo Stivanin <info@paolostivanin.com>
- Update to 2.0.8:
* Avoid using .getName() for new INDI properties
* Migrate drivers to new properties
* Various fixes
* Wed May 29 2024 Paolo Stivanin <info@paolostivanin.com>
- Use ldconfig_scriptlets macro
* Tue Apr 02 2024 Paolo Stivanin <info@paolostivanin.com>
- Update to 2.0.7:
* Update Pegasus Focuscube
* New driver for DIY dew controllaer cheapodc
* Weather interface refactor
* Driver for Wnaderer Box and Cover products
* Initial release of Alluno TCS2 driver
* Thu Feb 01 2024 Paolo Stivanin <info@paolostivanin.com>
- Update to 2.0.6:
* Link against httplib if using system libraries
* fix(actions): upgrade actions versions
* Fix various typos throughout the codebase
* Remove obsolete Avalon Legacy driver
* TeenAstro pulse behaviour #1977
* iOptron iEAF indi driver
* Allow using system provided json library
* Flip-flat: Allow handshake without ioctl on virtual serial connection
* Fix version reporting on older Celestron NexStar mounts
* PegasusAstro SaddlePowerBox
* Tue Dec 05 2023 Paolo Stivanin <info@paolostivanin.com>
- Rename libindi to indi.
* Mon Dec 04 2023 Paolo Stivanin <info@paolostivanin.com>
- Update to 2.0.5:
* Fix issue 1938
* Add one more check to ensure minimum count is met
* Update ioptronv3driver.cpp
* Handling tracking mode in the pegasus driver, and enable King mode
* Fixed 9 Stars Align
* On step work
* Added several missing commands
* Snapcap driver with network connections
* Wed Oct 04 2023 Paolo Stivanin <info@paolostivanin.com>
- Update to 2.0.4:
* Fix bug in relative positioning of Lacerta MFOC
* Fix setFormat typos, add isEmpty method
* Use ZSTD compression for XISF images when available
* Preliminary support for Planewave
* Bug fix making both focusers visible
* focuser crash fixed+some properties added
* OnStep work
* Openastrotech work
* Fri Sep 29 2023 Paolo Stivanin <info@paolostivanin.com>
- Force usage of GCC>=12 on Leap.
* Tue Aug 01 2023 Paolo Stivanin <info@paolostivanin.com>
- Update to 2.0.3:
* Simplify RTL-SDR driver for bug #558
* Update ioptronv3.cpp
* Fix leaks last blob on driver restart
* Fri Jun 02 2023 Paolo Stivanin <info@paolostivanin.com>
- Update to 2.0.2:
* Minor Fixes discrepancies Indi / SmartwebServer
* Add Flip functionality
* Pegasus NYX-101
* Bugfix/mfoc rel movement error
* Fix AutoPA lx200 OpenAstroTech
* Esatto: Port state tracking from EsattoArco
* PLL: Treat ERR messages as out-of-bound warnings
* Tue Apr 04 2023 Paolo Stivanin <info@paolostivanin.com>
- Update to 2.0.1:
* Resolve timestamp name conflict.
* Fix PMC8 tracking rate.
* Support for XISF files.
* Update DDW dome driver for new property functions.
* Added Safety and Goto Limits.
* Feature/qhy gps timestamp.
* Addition of myDewControllerPro driver.
* Southern Hemisphere Support for PMC8.
* Fixed regression with Servo Precision logic setting.
* [WandererCover] Adding support for newer firmware (20221008).
* Add driver for myDCP4ESP32 Dew Contoller.
* Focuser Temperature Compensation minor fixes.
* Fixing Openastrotech AutoPA.
* Fixed SestoSenso2 calibration.
* Force enable tracking after slew and unpark.
- Remove fix-operator.patch
- Remove fix-timestamp.patch
* Thu Mar 23 2023 Martin Liška <mliska@suse.cz>
- Enable LTO as it builds fine.
* Fri Mar 10 2023 Paolo Stivanin <info@paolostivanin.com>
- Revert hwcaps.
* Wed Mar 08 2023 Paolo Stivanin <info@paolostivanin.com>
- Build AVX2 enabled hwcaps library for x86_64-v3
* Wed Feb 08 2023 Paolo Stivanin <info@paolostivanin.com>
- Add fix-operator.patch (#1843)
- Add fix-timestamp.patch (#1837)
* Tue Jan 31 2023 Paolo Stivanin <info@paolostivanin.com>
- Update to 2.0.0:
* Esatto & SestoSenso2 update
* Fix for issue1582 park status notifications and extra debugging for command errors
* Add delay possibility for lx200 driver pulse command
* Refactor - use PropertyView/WidgetView
* Fix BaseClient::serverDisconnected behavior
* Deprecated use of Property/BaseDevice as pointer
* Don't modify usbfs_memory_mb if already set to unlimited
* Switch Flip Points to use sexagesimal numbers
* Refactor INDI::GPS to be inline with INDI 2.0.0
* General cleanup
* Don't call serverDisconnected if the client is not connected
* Add refraction, and turn off J2000 for Gemini
* Feature/new firmware fmc mfoc (Lacerta)
* Downgrade to base64 for snooped blobs
* Sun Dec 18 2022 Paolo Stivanin <info@paolostivanin.com>
- Fix cfitsio dep on TW
* Wed Nov 30 2022 Paolo Stivanin <info@paolostivanin.com>
- Update to 1.9.9:
* Driver for OpenAstroTech mounts
* DRIVER_INFO also present for F2 focuser so that the device is detected
* DeepSkyDad AF3: Mark as OK after backlash compensation
* Add Excalibur Driver
* Improved star brightness handling for higher gain
* Add Gemini L6 Flip Point
* lx200_OnStep minor fix
* Add missing rule for switch
* Fix client disconnect event
* Update weather interface to define update period, refresh and override
* Thu Sep 29 2022 Paolo Stivanin <info@paolostivanin.com>
- Update to 1.9.8:
* Remove some debug message from indiserver.
* Don't tell cfitsio about preallocated buffers.
* Corrections for Pegasus Falcon Rotator.
* Fix blob id conflit.
* Adding wanderer cover v3.
* Fix memory leaks in indiserver.
- Drop add-hem27.patch
- Drop fix-cfitsio.patch
- Drop fix-ioptron-meridian.patch
- Drop fix-ioptron-timeout.patch
- Drop fix-pegasus.patch
* Wed Aug 17 2022 Paolo Stivanin <info@paolostivanin.com>
- Add fix-cfitsio.patch: FITS files produced by INDI are invalid because there is extra data at the end of the file.
Many software only read the first HDU are not affected, but other reject the file.
- Add fix-pegasus.patch: Corrections for Pegasus Falcon Rotator.
* Sun Aug 14 2022 Paolo Stivanin <info@paolostivanin.com>
- Add add-hem27.patch: add support for iOptron HEM27 mount.
* Thu Aug 04 2022 Paolo Stivanin <info@paolostivanin.com>
- Add fix-ioptron-meridian.patch: add again in case a timeout is issued
and iOptron returns it despite the flush. This is an attempt to read this buffer again.
- Add fix-ioptron-timeout.patch: save meridian flip settings by default on change.
* Fri Jul 29 2022 Paolo Stivanin <info@paolostivanin.com>
- Update to 1.9.7:
* INDI Receiver and rtl-sdr.
* Ensure defensive check of UBP previous data to fix crash.
* Fast blob transfer.
* More AP changes: UDP, Home, Encoder Status, version major/minor.
* Fix memory leak when converting blob to base64.
* Use 8bits samples in the lookup table.
* Adding some basic PEC status and control to lx200gemini.
* Add Servo Precision control.
* Added RA/DEC guide speed.
* Fixed a bug where PEC was always enabled on startup.
* Various other fixes.
* Sat May 21 2022 Paolo Stivanin <info@paolostivanin.com>
- Update to 1.9.6:
* add lastparked logic
* Fixing UTC Offset format allowing :SGHH:MM# where MM can be 00, 30 and 45
* Terminate commands missing #, introduce PEC recording and status
* fix issue reading worm position
* UTC uninitialized structure fix
* Add mount status. Start CP5
* Remove user choice for CM/CMR
* Allow any guide rate between 0.1x and 1x
* Driver for WandererRotatorLite
* Thu Mar 10 2022 Paolo Stivanin <info@paolostivanin.com>
- Update to 1.9.5:
* Fixed updating of slew rate
* Add missing find_package for Qt5Core
* Fix setObjectRA and setObjectDEC for short and long format
* Allow Minutes Past Meridia +/- 180 degrees
* Adding new NexDome Beaver INDI driver
* Add and apply Meade Protocol spec definitions
* Add Pier Side Status for lx200zeq25
* Updated version of the AstroPhysics driver
* Fix Celestron focuser crash after calibration
* Fix but setting AP UTC
* Fix similar negative sign bug in AP driver
* Initial implementation for capture format and encode format
* Update driver interface when the LX200 support a focuser
* Add CEM70(G)-EC identifier and a deprecation note
* Add Driver for Esatto with Arco (goto, abort, sync, cal)
- Remove 0001-Fix-warnings.patch
* Tue Jan 18 2022 Paolo Stivanin <info@paolostivanin.com>
- Update to 1.9.4:
* OnStep: Don't show focuser tab unless found.
* More Lynx fixes - Step Size and Devices Types.
* OnStep: Remove Focuser on disconnect.
* Save Alignment Data to mount before sync.
* CCD drivers: snooping for standard epoch positions and issues
with fast exposure mode fixed.
* SkyWatcher Alt-Az iterative GOTO.
* Add Bayer frames software binning
* Add driver for Rigelsys/Astrogene1000 nFrame rotator.
* Send command at start to flush serial line for Pulsar/Rigel dome.
- Remove ioptron_fixes.patch
* Fri Dec 10 2021 Paolo Stivanin <info@paolostivanin.com>
- Add ioptron_fixes.patch (bsc#1193622):
* Fix PEC being on by default, it should be OFF by default.
* Fix iOptronV3 parking bug by using a workaround, because the
firmware must be fixed by iOptron.
* Add meridian behavior action and limit.
* Fri Nov 19 2021 Paolo Stivanin <info@paolostivanin.com>
- Update to 1.9.3:
* Fast Exposure support. Capture next frame in camera immediately
to avoid any delays.
* Support for DC focusers in Pegasus DMFC driver.
* Updates and cleanup for the OpenWeatherMap driver
* V42L driver supports detecting camera and renaming the driver
* LX200 SiteName Fix V2
* Improve lynx sync and homing behavior
* Fix FocusLynx GetConfig for focusers without HomeOnStart
* Force using hour angle when mount is slewing
* Correction the amplification values to spec.
* Fixes to PlaneWave EFA driver
* Add setting of home position for Rigel/Pulsar dome
* Wed Sep 15 2021 Paolo Stivanin <info@paolostivanin.com>
- Update to 1.9.2:
* Stable Astrotrac Mount driver.
* ESATTO Backlash measure and correction
* Correct color space when stacking on indi_v4l2_ccd driver with
a web cam that doesn't have color space info.
* The driver for the Planewave Delta-T was not working
* Improved handling of myFP2ESP controllers
* Pegasus UCH
* TheSkyX/Paramount Pier-side + guide async cmd fixes
* Update lx200_OnStep.cpp
- Drop fix_include_path.patch
* Mon Jun 28 2021 Paolo Stivanin <info@paolostivanin.com>
- Update to 1.9.1:
* New AstroTrac 360 driver (Experimental).
* New Pegasus FlatMaster and UHC drivers
* New Deep Sky Dad Field Rotator
* Core INDI Library improvements to base device and client classes
* Paramount TCP improvements
* Spectrograph and Receiver classes
* OnStep improvements
* RST-135 location and time fix
* Dome OTA fixes
* Object Azimuth and Altitude added to FITS header
* Rainbow Focuser fixes
* Support for CGX-L
* Fix crash in SkyWatcher API mount driver
* Fix iOptron DST bug
* Fix lunar and solar order
* PMC8 Driver v0.4 (Improved manual slewing, guiding, and other features)
* Try to send the guide pulses asynchronously to TheSkyX
* Use encoders for parking
* Lots of other smmall fixes, for the full changelog please check
https://github.com/indilib/indi/blob/master/ChangeLog
- Drop ioptron_dst_fix.patch (change has been upstreamed)
- Add fix_include_path.patch
* Tue Jun 08 2021 Paolo Stivanin <info@paolostivanin.com>
- Add ioptron_dst_fix.patch (fix boo#1187058)
When using iOptron mounts and KStars is set to get time and location
from the mount itself, if DST is enabled then KStars is off by 1 hour.
This patch fixes this issue.
* Sat Apr 24 2021 Paolo Stivanin <info@paolostivanin.com>
- Update to 1.9.0:
* Major INDI Library release v1.9.0 bring significant internal changes
championed by @pawel-soja to modernize core INDI Library drivers and clients.
* New drivers for DeepSkyDad Flat Panel & Pegasus devices plus
further improvements to PCM8 drivers.
* Mon Mar 01 2021 Paolo Stivanin <info@paolostivanin.com>
- Update to 1.8.9:
+ Fix paramount home and sidereal rate
+ Added labels for USB and Dew
+ Add entry for star adventurer
+ Add motor rate and current to the config save
+ Add CEM26 and GEM28. Migrate CEM40 and GEM45 drivers to
iOptronv3 commands and remove parking restrictions
+ Add preliminary support to inquire pier side for Paramount
+ Add support to Pegasus Micro
+ Updates to DDW driver
+ Increment version for SkyWAtcher Alt-Az
+ Add support for AZEQ6
+ Fix celestrongps guide rate scaling
+ Various small fixes
* Mon Jan 11 2021 Paolo Stivanin <info@paolostivanin.com>
- Update to 1.8.8:
+ New HOBYM Crux telescope driver
+ New Rainbow focuser driver
+ New ActiveFocuser driver release
+ 10Micron: UnattendedFlip handling
+ Bugfix/sat track lx200 julian day
+ Improved serial port auto-search.
+ Refactor/satellite tracking properties
+ SkyWatcher Alt-Az driver improvements.
+ Indibase/refactoring - update INDI::Property
+ Update of SmartFocus driver
+ Add new helper methods to the AlignmentSubsystemForDrivers (Alt/Az)
+ Streammanager/chrono - Fix the 24h time limit
+ Fix remote driver not sending properties to upstream server
+ Delay calculation in indicommon and indicorrelator (#1277)
+ Indidriver/refactoring - fix memory leak, increase performance
+ Streammanager/refactoring
+ Move absolute position bugfix
+ Use of the common mkpath function
+ Sesto Senso 2: Support for displaying 12V input voltage
+ Add Microsoft LifeCam Cinema to pixelSizeInfo
+ Sesto Senso 2: Log & display firmware version
+ fix: inline methods that use unlinked functions
/usr/lib64/libindiAlignmentDriver.so.2 /usr/lib64/libindiAlignmentDriver.so.2.0.9
Generated by rpm2html 1.8.1
Fabrice Bellet, Tue Sep 10 00:57:45 2024