libopencascade-draw7_7_2-7.7.2-2.5 RPM for x86_64

From OpenSuSE Tumbleweed for x86_64

This package contains support libraries for the
OpenCASCADE DRAWEXE test harness.

Provides

• libopencascade-draw7_7_2
• libTKDCAF.so.7.7.2()(64bit)
• libTKDraw.so.7.7.2()(64bit)
• libTKOpenGlTest.so.7.7.2()(64bit)
• libTKQADraw.so.7.7.2()(64bit)
• libTKTObjDRAW.so.7.7.2()(64bit)
• libTKTopTest.so.7.7.2()(64bit)
• libTKViewerTest.so.7.7.2()(64bit)
• libTKXDEDRAW.so.7.7.2()(64bit)
• libTKXSDRAW.so.7.7.2()(64bit)
• libopencascade-draw7_7_2(x86-64)

Requires

• /sbin/ldconfig
• /sbin/ldconfig
• libTKBO.so.7.7.2()(64bit)
• libTKBRep.so.7.7.2()(64bit)
• libTKBin.so.7.7.2()(64bit)
• libTKBinL.so.7.7.2()(64bit)
• libTKBinTObj.so.7.7.2()(64bit)
• libTKBinXCAF.so.7.7.2()(64bit)
• libTKBool.so.7.7.2()(64bit)
• libTKCAF.so.7.7.2()(64bit)
• libTKCDF.so.7.7.2()(64bit)
• libTKDCAF.so.7.7.2()(64bit)
• libTKDraw.so.7.7.2()(64bit)
• libTKFeat.so.7.7.2()(64bit)
• libTKFillet.so.7.7.2()(64bit)
• libTKG2d.so.7.7.2()(64bit)
• libTKG3d.so.7.7.2()(64bit)
• libTKGeomAlgo.so.7.7.2()(64bit)
• libTKGeomBase.so.7.7.2()(64bit)
• libTKHLR.so.7.7.2()(64bit)
• libTKIGES.so.7.7.2()(64bit)
• libTKLCAF.so.7.7.2()(64bit)
• libTKMath.so.7.7.2()(64bit)
• libTKMesh.so.7.7.2()(64bit)
• libTKMeshVS.so.7.7.2()(64bit)
• libTKOffset.so.7.7.2()(64bit)
• libTKOpenGl.so.7.7.2()(64bit)
• libTKPrim.so.7.7.2()(64bit)
• libTKRWMesh.so.7.7.2()(64bit)
• libTKSTEP.so.7.7.2()(64bit)
• libTKSTEPBase.so.7.7.2()(64bit)
• libTKSTL.so.7.7.2()(64bit)
• libTKService.so.7.7.2()(64bit)
• libTKShHealing.so.7.7.2()(64bit)
• libTKStd.so.7.7.2()(64bit)
• libTKStdL.so.7.7.2()(64bit)
• libTKTObj.so.7.7.2()(64bit)
• libTKTopAlgo.so.7.7.2()(64bit)
• libTKV3d.so.7.7.2()(64bit)
• libTKVCAF.so.7.7.2()(64bit)
• libTKVRML.so.7.7.2()(64bit)
• libTKViewerTest.so.7.7.2()(64bit)
• libTKXCAF.so.7.7.2()(64bit)
• libTKXDE.so.7.7.2()(64bit)
• libTKXDECascade.so.7.7.2()(64bit)
• libTKXDEIGES.so.7.7.2()(64bit)
• libTKXDESTEP.so.7.7.2()(64bit)
• libTKXSBase.so.7.7.2()(64bit)
• libTKXSDRAW.so.7.7.2()(64bit)
• libTKXml.so.7.7.2()(64bit)
• libTKXmlL.so.7.7.2()(64bit)
• libTKXmlTObj.so.7.7.2()(64bit)
• libTKXmlXCAF.so.7.7.2()(64bit)
• libTKernel.so.7.7.2()(64bit)
• libX11.so.6()(64bit)
• libc.so.6()(64bit)
• libc.so.6(GLIBC_2.14)(64bit)
• libc.so.6(GLIBC_2.2.5)(64bit)
• libc.so.6(GLIBC_2.3.4)(64bit)
• libc.so.6(GLIBC_2.32)(64bit)
• libc.so.6(GLIBC_2.34)(64bit)
• libc.so.6(GLIBC_2.38)(64bit)
• libc.so.6(GLIBC_2.4)(64bit)
• libgcc_s.so.1()(64bit)
• libgcc_s.so.1(GCC_3.0)(64bit)
• libgcc_s.so.1(GCC_3.3.1)(64bit)
• libm.so.6()(64bit)
• libm.so.6(GLIBC_2.2.5)(64bit)
• libm.so.6(GLIBC_2.27)(64bit)
• libm.so.6(GLIBC_2.29)(64bit)
• libstdc++.so.6()(64bit)
• libstdc++.so.6(CXXABI_1.3)(64bit)
• libstdc++.so.6(CXXABI_1.3.8)(64bit)
• libstdc++.so.6(GLIBCXX_3.4)(64bit)
• libstdc++.so.6(GLIBCXX_3.4.11)(64bit)
• libstdc++.so.6(GLIBCXX_3.4.15)(64bit)
• libstdc++.so.6(GLIBCXX_3.4.18)(64bit)
• libstdc++.so.6(GLIBCXX_3.4.20)(64bit)
• libstdc++.so.6(GLIBCXX_3.4.21)(64bit)
• libstdc++.so.6(GLIBCXX_3.4.26)(64bit)
• libstdc++.so.6(GLIBCXX_3.4.29)(64bit)
• libstdc++.so.6(GLIBCXX_3.4.32)(64bit)
• libstdc++.so.6(GLIBCXX_3.4.9)(64bit)
• libtcl8.6.so()(64bit)
• libtk8.6.so()(64bit)
• occt-resources
• rpmlib(CompressedFileNames) <= 3.0.4-1
• rpmlib(FileDigests) <= 4.6.0-1
• rpmlib(PayloadFilesHavePrefix) <= 4.0-1
• rpmlib(PayloadIsZstd) <= 5.4.18-1

License

LGPL-2.1-only WITH OCCT-exception-1.0

Changelog

* Sun Jan 07 2024 Stefan Brüns <stefan.bruens@rwth-aachen.de>
  - Use 3-digit soversion to fix BIC change between 7.7.0 and 7.7.1.
  - Disable documentation build on Leap 15.x, build fails otherwise.
* Mon Jan 01 2024 Stefan Brüns <stefan.bruens@rwth-aachen.de>
  - update to version 7.7.2
    * Details on
      https://git.dev.opencascade.org/gitweb/?p=occt.git;a=shortlog;h=refs/heads/OCCT-772
  - update to version 7.7.1
    * Details on
      https://www.opencascade.com/open-cascade-technology-7-7-1-maintenance-release/
  - Drop upstream fix_missing_limits_header.patch
* Thu Dec 29 2022 Stefan Brüns <stefan.bruens@rwth-aachen.de>
  - update to version 7.7.0
    * Details on
      https://www.opencascade.com/open-cascade-technology-7-7-0-maintenance-release/
    * General
      + Improved compatibility with C++17/C++20 compilers
      + Dropped support of pre-C++11 compilers
    * Modeling
      + New functionality is implemented, which could verify the
      input shape to be placed on a canonical geometry with the
      given tolerance.
      + Introduced new tool BRepLib_PointCloudShape generating a
      point set for a topological shape.
      + New option in BRepOffsetAPI_MakeOffset - approximation of
      input contours by ones consisting of 2D circular arcs and
      2D linear segments only, it provides more stable work of
      2D offset algorithm.
    * Visualization
      + Introduced new interface for creating V3d_View as subviews
      of another V3d_View.
      + Added smoothing to row interlaced stereoscopic output.
      + Added word-wrapping option to Font_TextFormatter.
      + Added support of a wide color window buffer format (10bit
      per component / 30bit RGB).
      + Added MSAA anti-aliasing support when using WebGL 2.0.
      + Introduced skydome generation feature
      3d_View::BackgroundSkydome().
    * Mesh
      + BRepMesh works too long and produces many free nodes on a
      valid face problems are resolved.
      + Meshing the shape no longer takes too long and visualization
      problems are corrected.
      + Wrong shading display of thrusections is fixed.
      + Rendering issue when using deviation coefficient of low
      value is resolved.
      + Mesher no longer produce 'bad' result for extruded spline
      with given deviation coefficient.
      + Holes in triangulation with large linear deflection are
      removed.
      + Broken triangulation on pipe shape is fixed.
    * Data Exchange
      + STEP translator now supports tessellated presentations.
      + Transformation tools BRepBuilderAPI_Transform/
      BRepBuilderAPI_Copy now handle properly tessellated
      presentations.
      + glTF Writer - added support of Draco compression.
      + Introduced DEWrapper - a unified interface to Data
      Exchange connectors.
      + Introduced tool XCAFDoc_Editor::RescaleGeometry() for
      scaling geometry in XCAF document.
    * Configuration
      + SONAME is now configurable in CMake and includes minor
      version in addition to major by default
    * Documentation
      + Improved samples / tutorials documentation.
      + Introduced new “AIS: Custom Presentation” tutorial.
  - Drop upstream patches:
    * fix_soversion_minor.patch
    + fix_build.patch
  - Add fix_missing_limits_header.patch
  - Library package was split up to avoid pulling in unnecessary
    indirect dependencies.
* Wed Sep 07 2022 Stefan Brüns <stefan.bruens@rwth-aachen.de>
  - update to version 7.6.3
    * Details on
      https://www.opencascade.com/open-cascade-technology-7-6-3-maintenance-release/
* Mon Jul 04 2022 Stefan Brüns <stefan.bruens@rwth-aachen.de>
  - Use verifiable source tarball from upstream
  - Use soversion including minor version (i.e. 7_6) to avoid
    incompatibilities due to ABI changes:
    https://tracker.dev.opencascade.org/view.php?id=32856, add
    fix_soversion_minor.patch
* Fri Jul 01 2022 Adrian Schröter <adrian@suse.de>
  - update to version 7.6.2
    * Details on
      https://www.opencascade.com/open-cascade-technology-7-6-2-maintenance-release/
  - removed obsolete
    * 0001-0032328-Missing-include-of-TopoDS_Edge.hxx-in-ShapeU.patch
    * 0001-Add-error-checking-to-chamfer-and-fillet-code.patch
* Sun Sep 05 2021 Stefan Brüns <stefan.bruens@rwth-aachen.de>
  - Fix build failures of FreeCAD due to a missing class definition,
    introduced with occt 7.5.2. Add
    0001-0032328-Missing-include-of-TopoDS_Edge.hxx-in-ShapeU.patch
* Wed Aug 25 2021 Adrian Schröter <adrian@suse.de>
  - update to version 7.5.3A
    Modeling Algorithms maintenance fixes:
    – Wrong result of the mkface command [Minor]
    – Hang on making pipe shell using BRepOffsetAPI_MakePipeShell [Crash]
    – BRepOffsetAPI_MakePipeShell null access [Minor]
    – Empty result of offset operation in mode “Complete” join type “Intersection” [Minor]
    – General Fuse produces the wrong number of solids [Minor]
    – Empty result of offset operation in mode “Complete” Joint type “Intersection” [REGRESSION since 7.3.0]
    – Sweep crashes if Bi-normal is given [Crash]
    – Boolean fuse fails and corrupts the argument-shape [Major]
    – unify same domain calls crossed for opposite vectors [Major]
    – BOP Cut produces invalid shape [Regression]
    – Invalid result of UnifySameDomain [Major]
    – Modeling Data – Wrong result of extrema curve-surface [Major]
    Data Exchange:
    – STEP exporter generates bad geometry [REGRESSION since 7.4.0]
* Wed Aug 25 2021 Adrian Schröter <adrian@suse.de>
  - update to version 7.5.3
* Mon May 10 2021 Stefan Brüns <stefan.bruens@rwth-aachen.de>
  - Add disk _constraints (mostly for PPC).
* Fri Mar 05 2021 Stefan Brüns <stefan.bruens@rwth-aachen.de>
  - Fix cmake files, wrong install directory and lib vs lib64.
* Sat Feb 27 2021 Stefan Brüns <stefan.bruens@rwth-aachen.de>
  - enable glTF support, depends on RapidJSON.
  - Fix FreeCad crash with some fillets and chamfers
    (https://tracker.freecadweb.org/view.php?id=4543), add
    0001-Add-error-checking-to-chamfer-and-fillet-code.patch
* Mon Feb 22 2021 Stefan Brüns <stefan.bruens@rwth-aachen.de>
  - update to version 7.5.1, for details see
    https://www.opencascade.com/open-cascade-starts-supporting-maintenance-releases-of-open-cascade-technology/
  - update to version 7.5.0, for details see
    https://old.opencascade.com/sites/default/files/documents/release_notes_7.5.0.pdf
  - update to version 7.4.0, for details see
    https://old.opencascade.com/sites/default/files/documents/release_notes_7.4.0.pdf
  - Packaging changes:
    * Move resources referenced by the libraries to separate package
    * Move drawexe resources to matching package
    * Remove the mostly empty occt package
  - Drop use-local-mathjax.patch, use mathjax gendoc option
  - Drop enable-exceptions.patch,
    use BUILD_RELEASE_DISABLE_EXCEPTIONS=false

Files

/usr/lib64/libTKDCAF.so.7.7.2
/usr/lib64/libTKDraw.so.7.7.2
/usr/lib64/libTKOpenGlTest.so.7.7.2
/usr/lib64/libTKQADraw.so.7.7.2
/usr/lib64/libTKTObjDRAW.so.7.7.2
/usr/lib64/libTKTopTest.so.7.7.2
/usr/lib64/libTKViewerTest.so.7.7.2
/usr/lib64/libTKXDEDRAW.so.7.7.2
/usr/lib64/libTKXSDRAW.so.7.7.2

Generated by rpm2html 1.8.1

Fabrice Bellet, Sat Nov 9 00:55:10 2024